The Jeep Hoist-A-Top is a must have for Wrangler owners. The new Hoist-A-Top makes removing and storing a hardtop an easy, one -person job. The Hoist-A-Top supports any top with a well-balanced steel frame using the new Balance Blade. Rubber coated hooks and foam-covered hardware will protect your top's finish. The Lange Hoist-A-Top uses an incredibly strong steel powder coated frame that quickly attaches to your vehicle top without any drilling. The rear Smart Hook allows you to lift and store your hardtop with the rear window closed which will improve the balance as well as take up less storage space. This model also stores your freedom top pieces up and out of the way, with your back window closed with the patented smart-hook. With the turn of the wrist this hoist will lift your top to the ceiling in your garage or carport for convenient, out-of-the-way storage. .Hoist-a-Top uses an incredibly strong steel frame that quickly attaches to your vehicle top. There is nothing to drill or attach to your top. A specially designed cable pulling mechanism then lifts your top to the ceiling in your garage or carport for convenient, out-of-the-way storage. It takes only about three minutes to remove your top, by yourself. Replacing it is just as easy. Hoist-a-Top is a complete turnkey system. Installation is simple and their custom systems come complete with excellent installation instructions. No more pulled muscles, strained backs, dropped or damaged tops, or pinched fingers. Best of all, you don't have to find a group of people to help every time! Hoist-a-Top is available with a manual or power lift.
| Connector Type | Clamp |
| Contact Material | Silver |
| Contact Type | Normally Open |
| Mounting Type | Ceiling Mount |
| Brand | Hoist-A-Top |
| Operation Mode | Manual |
| Number of Terminals | 2 |
| Operating Time | 3 Minutes |
| Release Time | 2 Hours |
| UPC | 859711004216 |
| Manufacturer | Lange Originals |
| Item Weight | 24.3 pounds |
| Package Dimensions | 32.75 x 13 x 7.63 inches |
| Item model number | 014-220 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 014-220. |
P**M
Jeep top lift and storage!
We needed somewhere and somehow to lift and store the top to our 2016 Jeep JK wrangler. This does it at a great price. Since we will only be lifting and putting back on 1x per year respectfully, the hand crank was fine. It was a decent price and does a good job. Lifting the top wasn't horrible but now only one person needs to be available to remove or replace the top vs. 3 due to the cumbersome shape of the top. It also locks in place and stores the top in the garage out of the way...which is the biggest jeep hard top problem!
R**K
Does the job
Directions weren't the best. Not easy to fully understand. Once the lift was up, I drilled 2 larger holes in each pulley so lag bolts cold be used for sturdiness. Use a drill or impact to raise and lower the top. The gearing is so high it'd be too much work to use the crank. I will only use the lift twice a year. So the lift will do the job.
C**Y
Perfect mount forJeep lovers!
This mount is perfect for jeep lovers who are always taking the top on and off. We were able to attach it to the ceiling and wall. Back the jeep underneath it and crank the lift down to attach to jeep. Sturdy and easy to assemble
D**H
Good storage solution
Great for storing our hard top. It was a little difficult to install.
N**
Description not accurate
The description says 2007 and up. Wrong!!!! Will not work for 2021s. Put it all up, took over an hour. Then come to find out it will not work on 2021. So upset!!!!!! U able to get all back down and into box. Cables cut, box ruined, so much work and no way to get it back down to return. Will not work
J**O
Works great!
Installation was easy. Had to install the crank on the side rather than straight back due to space. I added additional lag bolts to the lumber to add additional support.
P**E
A must for any Jeep owner.
Outside of the installation (directions could be better and I could be more mechanically adept) the lift is great and the customer service is exceptional. If I could have skipped the install part this would get 5 stars across the board.
C**B
Watch the YouTube video
Had all the parts and holds up the top. Took my time and got it up in a few hours. I used hex screws instead of the Phillips they came with, I trust those more when it comes to dangling 1k 7 feet high. 8ft ceiling, and 3 inch lift on jeep and I could lift it over a foot high. I use a drill with 3/4 socket to lift and drop. Make sure you are center when you lift or it could drag on your bed rails.
Trustpilot
2 months ago
4 days ago
