Tyger Auto T3 Soft Tri-fold Truck Bed Tonneau Cover Compatible with 2020-2026 Jeep Gladiator JT | 5' (60") Bed | TG-BC3J1060

This is the third Tyger tonneau I’ve ordered since 2018 (for 3 different trucks). Excellent quality, easy to install, and easy to remove when you need to. This fits the 2025 Gladiator perfectly and adds a nice appearance as well. I find these are more “secure” than others and holds up to weather and car washes - just remember to use the weather stripping and adjust the clamps.

I was really nervous about buying this. It went on within 30 min. That was with having no knowledge how to put it on and having to read directions. I officially have test drove it and it is safe and secured it rained and there was no leaks. It is very nice. Same type of one at the dealership was $1800, so I am very thankful to have found it at such a great price. The length was good. No problems only good things to say.

Easy to install, great fit, exceptional value.

Just finished installing it on my Gladiator and love the fit. Took me all of 15mins to install. Put the weather strip on the front of the bed. Slide the rails into the tonneau cover roll, and put the clamps on with a 10mm. The clamps are labeled A, B, C and there is an A, B, C on the rail to where they need to go. Then finally adjust the end where the cover goes in. The include instructions are actually helpful and there is a clear video on Youtube if you need it. It's only been about a short while but I am happy so far.

I would have given 5 stars except the first cover sent was a roll up and not a trifold. I might have kept the roll up but it was for a full sized pick up and not a Jeep Gladiator! lol. But, install was fast, it looks great and gives me a much better seal than my old roll up cover. You can't beat the price and if this lasts for 2 years like my roll up did, well worth the cost!

I was looking for a bed cover for my Jeep Gladiator and was looking at rolling hard covers. Most reviews and YouTube videos said they kept the bed fairly dry in most conditions. Prices ranged from ~$700 to over $2K. I had to make a trip across the country recently and the long range weather forecast looked very wet. Low on time and on funds I looked for a more reasonable alternative and came across the Tyger tri-fold soft bed cover. The reviews were very positive. It appeared to be a good, economical choice so I ordered it. When it arrived a couple of days later I installed in less than 30 minutes. Very simple and instructions were straightforward. The rear latches could be a bit more robust but they work and are easy to adjust an use. The frame and top materials appear to be of good quality and have held up well so far in the heat of the south and the torrential rains that much of the country has been experiencing. After a trip of some 4000 miles, I experienced no problems at all. The seals between the cover and bed are excellent and after numerous days of interstate highway travel in heavy rain and a couple of automatic car washes I experienced no leaks at all. If I needed a bed cover for another truck I would order another Tyger without hesitation.

Installation was quick and effortless, and the fit couldn’t be better. Opening is straightforward, making it easy to access when needed. It keeps the bed of our Gladiator completely dry, even in heavy rain. A practical upgrade that combines convenience with reliable protection.

installed night before 2,500 mile trip through lots of rain and wind.Driving 70 mph,from Florida ti Ohio and everywhere in-between.Cover worked perfect! no leaks,kept cargo secure.Build qaulity is excellent.Fit perfect for gladiator.Just get a thicker piece of weather strip for front rail.Literally took 20 minutes by-myself to install.

Easy to install for both Gladiators with the bed rails or those without. I suggest having someone help you centre the cover. Additionally place the weather strip close to the inside of the bed rather than the cab upfront.

nada todo en perfectas condiciones

I am not going to lie....my expectations were low. This cover ended up exceeding my expectations by a mile. Well crafted, easy installation, nice fit and quite possibly ending up being a long term use. I originally bought this as the price was low until I found a cover that suits me. Well as I live and breathe....this is a top notch unit. Well done Tyger!

Love it! Fit my 2021 gladiator like a glove. Stays on no noise and looks super. I looked at actual mopar ones on other jeeps and mine looks better for about 1/2 the price. Great product at a super price!

Product was delivered at the expected date and looks to be very good quality and easy to install. However, after watching few videos on youtube on how to install it, I didn't install it right away. The product has two options to attache it on the Jeep's side walls. The first option is to install the locking clips on the Jeep bed side walls lip. This lip is covered by a plastic protection from manufacture and to lock the clips on it, a section of the plastic must be cut to expose the side wall steel lip. I wasn't that enthousiatic to cut the plastic protection and this is why I did some research on the web. On the web, some people did this installation this way and had a bad surprise later on as the stress the locking clips made on this side wall steel lip pulled it and damaged it. The strong recommandation to prevent this is the second option installation which is to install the locking clips on the panel side wall track which unfortunately didn't come with my Jeep Gladiator but I can see the screws where it can be mounted on. I have placed an order to have those tracks (three is necessary, one on each side and one near the cab). The cover comes with aluminum bracket made to slide in those tracks and from what I found on the web, is the best and safest way to install it. Downside, those tracks are almost as expensive as the cover itself but at the end, I think it will be worth it.