OBD OBD2 3 pin to 16 Pin Car Repair Equipments Connector Diagnostic Tool Car Extension Cable Adaptor Detection for Fiat Alfa Romeo Lancia

It works perfectly to check my Delta's status.

Used this for my moto guzzi v7iii with guzzi diag no problem

I Was able to connect to the Fiat ECU with this 3 pin to 16 pin as well as:1) Generic KKL 409.1 cable (OBD2 to usb) using the FTDI chip (for windows 11 this requires installing drivers from FTDI site and changing the device type in device manager to the FTDI drivers so it shows up as a "USB to serial" device, and allocates a correct COM port.2) Startrek software, available as freeware.It's too bad Fiat had the connector in the engine bay, not sure what they were thinking. But I was also able to run it from there to a laptop in passenger seat for real time monitoring of the ECU.

The 848 Evo runs a 3 wire ECU connector down at the battery (not to be confused with the 4 pin under the seat for the DDA), You hook up the 2 alligator clips to power and assuming you have the other required interface cables and drivers installed this will work.

Worked like a charm on my 2020 Tuono RR. Had a CEL that wouldn't go away, so I ordered this cable, paired it with a cheap bluetooth obdII module, and accessed the bike with torque pro. It told me there were no codes, and the light went away when I cleared them using the app.

As advertised. I ohmed it out before use, was fine, no issues.

It's made well but the L and K lines are reversed on the cable I received, making it incorrect for a Lancia Delta HF Integrale.

Works as intended, cheap