GLOTRENDS M.2 Heatsink Kits with Thermal Pad for 2280 M.2 SSD, Fit for Desktop PC Installation, 22x70x10mm Aluminum Body

Cheap and fit in my ps5

A super simple solution that reduces heat on your m.2 drive. This comes with two sets of heat sinks, pads, and cleaning wipes. However, the wipes were both dry even though it states one was to be wet. These used to clean the surface of oils to create the best contact between the drive and the thermal pad. There is no adhesive on the pads of course. The pads are the 3mm thickness. They are not squishy, so i feel they don't make the best contact that they could if you have squishier pads. Nice metal clips. Good quality bands. My drive was idling at 62 degrees Celsius, as the drive sits right above the video card. So, the heat rises from the card and makes the drive a bit warm. After installation, the Idling temps are now at 34 degrees and full operating temp peek at 47 degrees Celsius. Was very simple: clean the surface, place thermal pad down, place heat sink on thermal pad, clip on, and install drive back into my PC.

The heat sink i used on one of the nvme drive works pretty good, i wouldn't be able to say how hot the patriot 512 GB probably normal operating tempreture,there was no issues installing it.

These are just what I was looking for for my Pi5. They are low profile and fit nicely in my case with nothing touching it. I only used the metal clips and everything is fine. I haven't measured the temp on the drive but the heatsink is warm so it's doing it's job and is much better than using nothing. I only needed one for now but I have a spare when I buy another drive for my mini pc.. Nice deal.

Anyone who PC games knows heat is everything when playing. I had never considered, however, adding a heat sink to my m2 drives. When I purchased my newest computer (which has 4090 rtx) I figured if I could shave a few degrees off, that would be great. Overall I've noticed a drop in temp of between 5 to 6 degrees C, which may not sound like much but when the first several hours of my gameplay stays in the 40 to 50 C degree range it makes for a better experience, and since I now have only the one kidney after buying this monstrosity I want it to last. The set comes with actual brackets or you can use the silicone bands that come with it to attach to the top of the M2 drives. Thermal pads were easy enough to fit even with my fat fumble fingers. I highlly recommend. Happy gaming.

The clips included with the heatsink are sharp enough on the edges to scratch the PCB and they're difficult to get on without doing so. Do yourself a favor and get some single sided foam tape, about 1/8" thick, and cut to size to adhere to the clips (on the inside metal surface). They may fit a little tighter, but that's good since they need to hold the heatsink in place anyhow, and it won't risk damaging the SSD. You can see where the clip scratched the PCB and exposed part of the trace in the photo toward the middle and also the left of the photo. Surprised the manufacturer doesn't provide foam tape or have some sort of rubber surround on the clip. Thankfully the SSD is fine and it was somewhat inexpensive, but be extremely careful with something you saved up a lot to buy and looking to keep it in good shape. On a side note, the first question about this product is probably the best question on the internet.

Installed on a 4 TB WD Black SN850X, with very little clearance to the GPU. Works great. Idles at 35, around 45-50 under load.

The heatsink arrived in good condition and it works well.

pod obciążeniem spadek 6-8 stopni w idle nie ma zmian. Px700 pod obciążeniem przed 60 teraz około 52.

Simply nothing bad to say! My SSD stays perfectly cool, and installation was super easy. I mostly bought it because the original factory heatsink kept coming off, and this one has been totally worth it.

Works OK, and easy to install.

Got this two pack and they are fantastic heatsinks for NVMe drives. The included silver braces felt a bit loose so I used the bands and they look great in the case and cover up the NVMe drives keeping them cool.

Really awesome little heatsinks for the price. You get a high-quality heatsinks and they’re really slim. The quality is really good and I’ve used them on an SSD on one of my mini PC for the past six months without issue and it dropped down the temp close to probably 15°C. Highly recommend!