Wet Look Natural Stone Sealer. Durable, Long-Lasting Gloss Protection. Interior and Exterior Pavers, Slate, Sandstone, Travertine, Flagstone, Driveways, Garage Floors, etc. Black Diamond Stoneworks.

✨️Another great product from Blue Diamond! Wet look product AWESOME. I just wrote a review for the color enhance product applied to my brick fireplace, average size 3 side wrap around, mantle and load ledge. I applied the Wet Look product after dry time of sealant. Easy, fast application with brushes, 3" and narrow 1" for mortar crevaces this time. At first I applied along the grain pattern of brick, then I started going across grain, not sloppy, dabbed off excess brush capture before each brush dip. 1 quart again the right size for my job. The result was even better! Now I have a natural looking end result where color is further enhanced and the gloss is variegated. My brick is nearly dawn of time, with many textures, no illusions here. Not a glassy glossy epoxy look. Rather super clean, well cared for, intriguing color and hue with gloss. It no longer looks dusty, crushed with ash and so old we should rebuild it. So happy with the product in Colebrook, NH!✨️ to private for a picture, sorry. Not a liar, however. Gotta have this....water soluble, low odor, clean up's a breeze.

We had just over 600 sq feet of Travertine Natural Stone Tile put in 20 years ago and not being an experienced person in tile maintenance, which you need to be IMHO, well versed in knowing what, when and how to keep it looking great since it can be a phenomenal asset to your home. As you can see by one of the pictures (I'll let you guess which one) that the tile had been sorely neglected and that one picture is actually AFTER I had completely stripped and scrubbed all the wax and sealer off it completely. The Tile actually looked like there was at least some hope, but the grout, well, it is so bad that I worried Amazon would cancel my Prime Membership if they saw it. Nevertheless, it had to be thoughtfully addressed so I used a Grout Refresh product on it and prayed a lot that this project would eventually turn out respectable after the several days, yes, more than many had I spent getting it Sealer-Worthy. This is where the Black Diamond Wet Look Stone Sealer comes in. I do have some, but limited DIY experience with sealers and know they can go horribly wrong (this is where the suicide hotline comes in) then it's a complete disaster to fix. I read a couple of unfavorable reviews with pictures and can only suspect they did something wrong. This sealer is by far the best sealer I've ever used. Follow the clear and concise directions, like don't shake it, don't let it puddle, use specific applicators, I used a pad applicator because they're simple to use and applies the sealer uniformly. Let it dry one hour between applications and apply 3 coats max, all of which I did. This Sealer performed flawlessly as you can easily see. I now have 3 excellent coats of a top-grade sealer and seriously can't believe the outstanding beauty it restored to my Tile. I give Black Diamond Wet Look Stone Sealer 5 solid stars for a superior quality product, ease of application, brilliant, finished look with zero imperfections, fair pricing and restoring my faith in sealers again. Thank you, Black Diamond, I'll be using more of your products in the future.

I applied 2 coats. Easy to use and made my rocks nice and shiny!

This stuff goes a long way. I’m actually looking around my yard to find more stones to put it on because there is more than enough for the ones I wanted. Just be sure to wear gloves because it does stick on your hand and almost impossible to get off. Which is good for the rocks. But not good for someone who doesn’t redirect all the time. The rocks are beautiful. And still stays effective, even after the solution was left out in the rain. Again, user error.

I have used this product for several years, just finished my 8th gallon. Beautiful results on gray stone here in Arizona, but with the heat, probably does not last as long as in cooler climates, also does not wear that good. But still pretty while it last. Application with pump sprayer worked great over the years, that is until this year. Something seems to have changed in the packaging or the formula. Purchased a new Home Depot sprayer, cloudy, 65 degrees, did not shake and surface clean and dry. Had 2 gallons to apply. First gallon application went perfect. Second gallon, well… Started spraying like normal then 5 minutes later, pump started clogging, tried clearing the obstruction, then sprayed and then clogging again. Kept up this process for 15 minutes and finally gave up and poured product directly on the stone and used a Swifter with no pad to spread - a mess, but the result was okay but wasted product. Sent back remainder of product and received a replacement from Amazon. Bought a new sprayer from different Home Depot hoping the previous sprayer was defective. But no, the same thing happened again with the new gallon of sealer and a new sprayer. Seal on both gallons appeared to be intact, but after spraying a short time, nothing but white snot came out of the nozzle. Since I like the results so much, from now on, I may try straining the product with a paint filter or will use a pad to apply. Worked great over the years but not this year, but of the 3 gallons applied, 1 went down perfect, but the other 2 did not. UPDATE Update - Beautiful as this product lays down, it builds up thick layers that after some time it looks terrible, even after reapplication. It took professionals to remove the layers and apply the proper sealant ($2,000). So I would not suggest using this product unless you are aware of the issues. See picture of the thick layers being removed.

J’ai du passer 2 couches du produit pour que l’effet soit un peu visible, le résultat est visible mais on est loin de l’éloge Faite par certains utilisateurs.

It’s not cheap, but after 4-months, the finish is still good and there is plenty left over for future coats. I used a paint roller to do 3 thin coats of sealer over 15sqm of blue black slate. It went on with no trouble and the thin coats ensured no pooling or cloudy patches (this was mentioned in a couple of other reviews).

The bottom half of the walls in my natural slate shower stall were white with hard water build up that no amount of scrubbing, with various cleaning products could conquer. After a lot of research, and reviewing pictures, I chose Wet Look sealant and it restored the colour and shine of my slate. After a thorough scrub, with the tiles still appearing white, I applied 2 coats of the sealer to the walls, and 3 to the floor. The shower looks like new again and the product was very easy to apply with little odour and very little clean up required. I will use this product routinely on my slate and try it on my other natural stone floor tiles! Would definitely buy again and recommend!

Very poor quality

This stuff is amazing and YES it does have the wet look. When we bought our house, they put in slate tiles in the shower. A few of those tiles were falling apart as they were never treated and they went grey...almost white and i didn't know what to do. I read some reviews and thought I would take a chance and absolutely love how they turned out. Big difference although the photos i took don't do it justice...I did put 3 coats on the tiles and 4 coats where the water typically hits consistently to give it extra protection.