346-0219-2PK Decorative Self-Adhesive Film, Maple Wood, 17" x 78" Roll, 2-Pack

I used this to cover a pair of older speakers to match the furniture in our house. The results are better than I had hoped for. The material is easy to work with. It sticks well, but not so well that it’s difficult to peel off and reposition. You’ll need to take your time and be patient to get best results. The instructions say that the item to be wrapped, must be free of dirt and oil. I cleaned the speaker cabinets with rubbing alcohol and vacuumed the parts I wouldn’t be covering. I used the applicator squeegee that comes with one of their kits. One edge is cloth covered, I use this edge to make sure I wouldn’t mar the vinyl. I’d read reviews for other products that say the printing on the vinyl can be scratched off. That’s not the case with this material. The Wood grain pattern is on there to stay. Overall, I’m not sure how this product could be a lot better than it is. I’m very happy with the result!

Bought it cause my table top is black and doesn't match the aesthetic of my room. This covered my table well, and looks really nice if you ignore the warping of my obviously plastic table. Pretty easy to use and the wood grain matches the picture in my opinion. It's been on my table for at least 3 years now and hasn't lifted at all. Definitely recommend

I am a woodworker and built my kitchen cabinet myself recently. For some of inner drawers that barely anyone would see, I used this film to cover the front (rather than making more drawer fronts out of plywood/wood). Here's the pro and con for this film. Pro: 1. Super easy to use... If you're careful, you can avoid 100% of the bubble.. since it's removable, you can peel off and re-do; which I did whenever I discovered bubbles. 2. Actually looks like real wood and pretty good, even at a close distance Con: 1. Very thin. If the underlying surface is not perfectly flat, it will show... example would be if there's a little tiny 1mm nailhead, you will see it protruding... so make sure your surface is perfectly flat or willing to accept some imperfection Caution: 1. Use very sharp razor / knife to cut.. if you do, the result will be awesome. You want to cut it cleanly because the material is stretchy, it'll distort if you don't cut cleaning and then pull on the waste piece. Overall, it is a good product and very reasonably priced.

I had a really hard time finding a color match for our cabinets, and pattern match. This beech was about the closest I could get. You can see in the two photos that the Aristokraft cabinet was is a bit more oraney or gold than the DC Fix Beech color. But, it is truly close enough. Posting two pictures here from the same bathroom cabinet. This was the worst damage of all the cabinets we had. Mostly from leaky bottles. The cabinet is made from formed sheets of particle board, and then they have a very thin piece of paper-backed film on them which does not seem to tolerate being wet for more than a short while. When the base of the cabinet go wet, it not only stained the paper; it also caused some unevenness of the surface. I ended up peeling all of the paper off that I could, and then tried to sand it down, but some of the particle board started to crumble. So, I went ahead and covered it with the DC Fix paper, using a template I made of taped-together paper, and a razor blade. I cut the corners, but left the back with a little lip. It doesn't look great in the back, but it looks better than the uneven stained bottom of the cabinet. I don't know how the pictures will look, but there is some noticeable uneven spots, especially on the far lefts side of the photo. That's not the fault of the DC Fix film, but rather of the cabinet underneath. The other photo is of a drawer that also needed some stain covering. The drawer was easier to lay in than the cabinet base because of the size. I did every cabinet we have because we are moving. It took me about 1-1/2 hours per cabinet base -- maybe 2 hours. But the results are better than before. The adhesion is good, but not outstanding in spots where the cabinet may have been exposed to some sort of soap or baby oil. So, I think I may have to get some spray glue and try that underneath. [EDIT: I tried the spray glue adhesive — no don’t do it, totally melted the plastic! Near disaster. Do not use aerosolized spray glue unless you test it on a spare piece. Disintegrated in a minute.] The hardest part of trying to fit these in the spaces was the corners. It was hard to cut it perfectly. Again, not a fault of the film necessarily. The cabinets and drawers had some variation in their shape, and I cut it so there was excess, and then I trimmed the excess after burnishing it down (back of the curved tip of a vegetable peeler worked well. After installing in this cabinet, there were some waves that wouldn't go down. All of the DC Fix film had bubble, and I mostly tried to get the air out toward the edge, but for many, it was easier to air it out with a small razor blade hole. I peeled and reset the paper many times trying to get it right, but it was harder than I thought it might be. the remaining waves were subtle, and they did somehow sort themselves overnight. I think they all look terrific now in comparison to what came before. The adhesion in the soiled corner is not good -- will require some extra adhesive, I think. I may get another roll of this same sheet to cover it with a 2nd layer, to try and disguise the imperfections. I like the pattern, and the material. It seems like the plastic would be less permeable than the paper that was originally in the cabinet. If you are using this, make sure you clean out every bit of grit and speck of salt or sugar crystals. The imperfections are amplified in the final installation, and you don't want to have to undo your sticky DC Fix all over again after you just got it in there perfectly. I really do like this product. I wish I didn't have to use it -- or rather, I wish I had ordered it years ago before the cabinets got messed up. [EDIT: It took us a year to move. And would definitely say that you need an extra coating of clear protective film on top of this if it is going to get wet under the sink with bottles or inna cabinet with oils. It is some kind of thin plastic but somehow not waterproof.] (The review is asking about "sheerness" -- not sure what they mean. Like see-through? It is opaque and meant to be opaque.)

I used this for my vanity. Not gonna lie these videos make it look so easy but it’s difficult. There’s definitely a learning curve to it. If i don’t look too hard it looks good but theirs definitely some spots that i left bubbles in on it came on crooked (my fault). Overall pretty nice and cheap update to my table. It wasn’t big enough to cover my whole table but it lined up pretty easy and you can’t tell where it’s a new roll. Use a blowdryer to help it stretch and lay better

The quality is good. My dark furniture looks so much better with light accents on the panels. I had ordered this in a smaller roll before, so this is a reorder in a larger size. The roll arrived with wrinkling that would run for the entire length of the roll. Must be a storage issue.

I bought this product to cover the side of some second-hand glass door cabinets that I got for free. I was looking for contact paper that has a wood grain look, but is smooth, without any fake "wood grain" texture. This product fit the bill. I bought this d-c fix product based on the reviews, and especially for the price. I was able to get a 2-pack for about 10% more than the cost of a single roll. When I received the product, i was initially disappointed to see that both rolls of contact paper were quite flattened, which led to the contact paper separating from the backing paper as I tried to lay the product flat. However, this product is very easy to work with, as long as you work on a small section at a time. I found it easier to concentrate on obtaining a smooth finish versus worrying about making the edge of the paper match the edge of my project (you can always trim the edge later). I was very pleased with the results!

Newly remodeled kitchen. Wanted to keep the natural look of the inside of the cabinets and drawers. This was almost a perfect match. Easy to install. Could easily peel up and put back down if misaligned during install. Some air bubbles likely due to my quick install. But not really obvious. Look great.