OES Frame Sliders Fork Sliders Rear Axle Sliders Yamaha FZ-07 FZ07 MT-07 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 No Cut (Yellow)

Great quality sliders and the install was a breeze using the instructions on OES's website, it took me less than 15 mins to bolt them all on and the colors match the Intensity White color scheme perfectly which was a small bonus for me. Hopefully I'll never have to test them out but I'll update the review if I do.The tools required are:-17mm socket with extension-10 mm hex-Two 5mm hex or Allen wrenches-Loctite Red and Blue-Torque wrench

I purchased this combo set from OES because it had all the basic protection for my 2019 MT-07 in case I tipped it over. Installation was easy and installation guide was included or you could even go to their website for a more detailed set of instructions. Had it all installed within an hour. The rear sliders also act as spools so that you can lift the rear end up for basic chain maintenance, but if you plan on taking the rear tire off then the rear slider will need to be taken off and you will have to find a different way to lift the rear up.I do have to say that Red Thread Locker from Loctite is a must for the throttle side front fork slider and rear throttle side rear spool slider for the MT 07. If don't and the clutch side sliders don't come off with an allen key but the throttle slide does, then you will have a nightmare scenario on your hands. I figured it out that out when I was simply test fitting the parts, so definitely pay attention to the instructions.Personally I coated the throttle side front fork slider and throttle side rear fork slider with bolt threads with as much Red Threadlocker as was possible and tightened on to their bar. I then just put a couple drops of Blue Threadlocker for the bolts that held down the Clutch side front for sliders and rear sliders. For the frame sliders that go into the engine mounts, the instructions state to grease or oil the bolt threads before mounting. It's most likely so that the stainless steel bolts don't corroded against the aluminum engine. I didn't want to strip the aluminum thread of the engine block so I just put it in dry and torqued the engine mounting bolts down to OEM spec.All in all, the fitment for all the parts are spot on and the materials look and feel solid and I would recommend getting it if you were looking for protection for your bike.

This product is flat out excellent. Price, materials, online instructions - it's all there. Installed these on my 2018 Yamaha MT-07. They look fantastic, the install was easy for even me (habitual bolt breaker). I tried other company's sliders and broke them (R&G). This product has superior components, look better and come in at a better price point. If you are looking for a complete slider kit, look no more.

Your browser does not support HTML5 video.  Saved the bike from serious damage after a low slide accident going about 30mph. This investment was well worth it and saved everything but the brake pedal. Other damage was purely cosmetic. I recommend getting bar end sliders as well, as if I had aftermarket ones my bike would have been spared even more. Ride safe out there, friends.

Edit: dropped my bike today on an incline. The main slider took the brunt of the damage, along with a bar end and lever. Had i not had this, the damage would've been much greater.Took me around 15 minutes to install at a leisurely pace. The installation instructions are on OES's website, basically put loctite red on one side and blue on the other. The only issues that I had were related to taking the engine bolts out - I needed to scramble around for a cheater bar to fit onto the 10mm allen key.I have been a bit skeptical about the performance of these sliders, but they do have a video on their website (customer submitted) where he lowsides at a decent speed (45?), and for the most part the bike is in good condition. There were some parts that were scuffed, such as on the exhaust pipe (which, in his case, stuck out pretty far), but it definitely looked rideable after. Definitely helped my confidence a bit that this product would actually do something.

I like everything about this. So quick and easy to install even a toddler could do it. Took me about 5 to 10 minutes with no instructions. They are nice quality and perfect to keep bike safe. Well worth the money I would highly recommend!

Easy install...Fit and finish were perfect. My daughter loves her MT07 even more...Made her Xmas....DD

A full set for the price is amazing. Easy to install and it looks good too. The back spoils helped with my new motorcycle lift so I can do some maintenance now. Make sure to follow instructions online and carefully. You will need a torque wrench.