Nillkin Qi Receiver USB C, Thin Wireless Charging Receiver, Type C Wireless Charger Receiver for Galaxy Note 8 Pro/A50/A70/A10s/Xiaomi Note 8/Huawei P30 and Other Type-C Android Phones(Long Version)

I tried several brands of Qi charge receivers before deciding on this line. [ Nillkin ] -USB-C (Android) versions seem to perform best - as if the phone was directly plugged in. Wide forgiving sensitivity easily picks up power from pads and stands. Presence or absence of a phone case makes no difference. -Some Lightning (Apple) versions are a little picky about physical alignment with a power transmitter. Laying the phone on it's side across the transmitter/stand can help when this happens. Even so, I sometimes catch the phone behaving as if it was just placed on the stand, even after being there many hours. Still, seems to get charge to 100% and works. -These Receivers are 1mm thick, and are nearly undetectable under a protective phone case. - I like that the Qi "occupies" the phone's USB-C or Lightning port and blocks interlopers from easily accessing or abusing my device. The only caution I have is to be certain to buy the correct "length" (Long or Short) for your device. If in doubt, buy the Short. Adhesive - I don't use it. There are rare occasions where it is necessary to use the phone with a cable, so the Qi Receiver must be removable. I worry that attaching with adhesive would prevent Qi cable from being removed from the phone. [it does not stretch] Have purchased 8 of these for my older phones, and consider them "must have" for non-Wireless charging types. Highly recommend.

When I got my Samsung A20, I thought it had wireless charging. It doesn't, so I looked around and settled on this charging adapter. I got the short version, and as you can see from the picture it fits very nicely. You plug the cable end into your phone and then curl the (for me) short cable to the back, with the pad. The pad comes with an adhesive, like double-sided tape, but I didn't use that. I just positioned the pad on the back of the A20 and slipped the case onto it. That holds the pad quite well and there is no extra bulk from the tape. This fitment does make the case bulge out just a bit due to the extra thickness of the pad, but it isn't bad at all. I can feel it when I hold the phone, but it isn't bothersome. One consideration is that, to use wired charging, you need first to unplug the pad. This isn't an issue for me, because I just charge wirelessly all the time so I never plug/unplug the device. The pad does not get hot and charges the phone very well. I have it coupled with a wireless EnergyPad base and the phone charges quite rapidly. I also wirelessly charge in my car, so whether at home or while driving, I have convenient place-and-charge setups. I do recommend this charging pad-adapter. It has been a great addition to the ease-of-use of my first-ever smartphone. Since Samsung recommends several short charge sessions rather than fewer longer sessions, I find this setup is perfect for my use and for longevity of the phone battery. I don't think I'll have to buy again any time soon, but this is the pad I'd get if I were back in the market.

Works as expected - Added wireless charging to Samsung A51. Fits underneath Spigen Slim Armor case, charges through this case w/o problem on Anker wireless charging stand. Not fast a charge like using the cabled fast charger that comes with the phone but I like the convenience of just tossing the phone on the stand and letting it sit over night. The phone holds charge all day any way so it's not like I need to do a fast charge in the middle of the day. Had bought another brand directly from another vendor that indicated made for the A51 phone but It does not charge the A51 w or w/o case on phone yet it works on an old LG V20 with case on it to bad it is not in use. This one is a recommended upgrade.

How to get FAST Charging and not heat! I tried a bunch of different combinations of Qi chargers and receivers. One combination charged VERY FAST! Receiver: https://www.amazon.com/dp/B08ZNP3Y76?ref=fed_asin_title&th=1 2000 mah QI Receiver Type C for Samsung Galaxy A51 - Type C Wireless Charging Adapter USB-c - Fast Qi Wireless Receiver Type C It is made by YK YKING but if you put YK YKING in the above search, it doesn’t come up. Charger: https://www.amazon.com/dp/B0CKXKYSMY?ref=fed_asin_title&th=1 ESR for MagSafe Charger 15W Wireless Charger for iPhone 16 Pro Max/16 Pro/16/16 Plus/15/14/13/12 Apple Magnetic Charging Pad for AirPods 4/3/Pro/Pro 2 Galaxy S25 Series with Dual USB A/C Ports, Black Surprisingly, it outperformed chargers rated higher than 15w In addition, it is built MUCH BETTER than the other Qi chargers, much better/stronger/longer cable and magnet to hold whatever you put on it steady. It is smaller too. Part of the solution to getting best performance out of the charger is the power source you plug it into. To get best charging speed, you MUST plug it into a 9 volt 2 amp source. Less than 9v or 2a, not only will the charging speed be substantially reduced, both the charger and the receiver will run hot, since they are not getting enough power, so they are not running smoothly and consistently and instead varying charge and struggling to stay at optimum. Anyway, I hope this helps. Spent a lot of time, trying different Qi chargers and receivers, measuring charge rates and times and this one combination was immensely faster than all others! Almost as fast as a direct cable, instead of wireless Qi.

This is a great trickle charger meaning that you charge the device when not in use. Reason being is, this does preform as fast as a corded charger. Pay orientation to the orientation of the charger port as they are different placement. Great for a kids tablet but does not come with a means of sticking to case or phone, I had to tape it to the back of my sons tablet case.

I have a OnePlus 6T. I bought it because it was mistakenly sold to me as having wireless charging, but I quickly found out it didn't. The rest of the features were nice enough that I decided to keep it, and this pad fills in that gap very nicely. It's very thin and has a thin ribbon cable with low-profile USB-C plug. While thin, a hard-shell case may not allow enough room for this to be used, but if you have a silicon case that is flexible, you'd barely know it was there. The ribbon cable connects to the jack at a right angle so that when it is plugged into the phone, the cable extends towards the back of the phone. The cable is very thin and all it needs is just a slight amount of flex from the case. The pad itself is very thin. When in place, the jack just barely extends past the opening in the case for the USB-C port, being almost flat. The case doesn't lay perfectly flat on the back of the phone, but you'd have to look for it to see the almost imperceptible bulge. All of my wireless charging pads work fine with it. The phone starts charging and I never have to plug in a USB-C cable to charge it. I have a wireless charging cradle in my car, and it works well in that too, letting me top off my phone any time I drive, or use the GPS with directions while not draining the battery. Pros: Works very well! Cons: Uses the USB-C port so you can't plug in anything else. As long as you rely on a phone case to hold it in place, you don't have to use the adhesive and it does unplug easily enough when you need to use the USB-C port, but still, you'll have to do that. Advice: Measure the distance from the base of your phone to the camera opening. Make sure you choose either the short cable or long cable. This cable length determines how far up from the bottom of your phone the pad will lay. You'd probably like it sitting closer to the middle, but don't want it to overlap the opening in your phone case or accidently cover up your rear camera lens. Make the measurement and check the choices to be sure you're ordering the right length.

I prefer wireless charging even though it takes much longer. I'm not in a hurry. I hooked up this coil to my big arse Lenovo. I didn't stick it on using the adhesive but rather shoved it between the tablet and its case. Despite this leaving the coil a millimeter, or two, off the charging pad (with the case between them) the coil has no issues picking up the charge (if I position the tablet so that the coil is directly on top of the pad). The Lenovo always whines about the slow charging rate, but that's ok. I'm not in a hurry, and the low wattage of QI charging is better for the battery long term health.

First one lasted 6 months, this one only made it 4 months. Not worth buying. Find another brand

Very good product it's so useful. In office and car travel time very useful

Value for money product

Useless product. Refund is not allowed, the replaced product which was sent was also defective. Waste of money