AC Heater Blower Motor HVAC - Compatible with Chevy, GMC, Cadillac Vehicles - Avalanche, Silverado 1500, Tahoe, Suburban, Sierra 2500, Yukon XL, Escalade - Replaces 35143, 1581647, 15-81647, 89019321

It fits my 2011 Civic perfectly and seems to work fine. I know some reviewers questioned whether these blow the same volume of air or are as quiet as the OEM fan. I can't remember specifics about the original fan, but this one seems very comparable. The price was right, and it was very easy to replace. I am happy with it.

Works, good replacement on a 2014 lancer es. easy to install

I'm so glad I have heat again in my car! It fits perfectly in Toyota prius, great value, we put it in ourselves. Super glad it wasn't a short. It's a tiny bit noisier but I am just so happy the defrost works! 😁

When using the heat or AC on my 2014 Toyota Tundra, I could hear some minor squeaking. While the problem was not too bad, I knew it was only going to get worse so I decided to replace the blower motor fan. Replacing the blower motor is not difficult but it is a bit awkward because of its location under the dash. There are videos online showing how to do this procedure. On the plus side, this replacement blower motor looks just like the OEM part I removed from my truck. It runs quietly and pushes plenty of air. On the down side, after installing the blower motor, I was unable to plug in the wiring. I ended up removing it so I could closely compare the old OEM assembly with the new one. Unfortunately, the copper terminals on the new blower motor were not lined up right (look closely at attached pictures) so I was unable to plug it in. Using a small screwdriver, I bent them over into a better position. I installed the new blower motor a second time and was able to plug in the wiring with no further issues. I selected this part because it was cheaper than an OEM part and comes with a lifetime warranty. I hope I never need to try to exercise that warranty. Would I recommend this part? Despite the issue with the plug, I would still recommend it.

Worked perfect immediately had full power again just in time for summer

I would consider not buying from this seller. I have been reaching out to them since January attempting to get a refund or a replacement for the HVAC blower they sold me. Blower quit working on the day after Amazon's return policy. Seller has continued to tell me that the item is not in stock and to continue to wait. I drove most of the winter with out heat due to this, ended up buying a used blower from ebay and have had no issues. Still out my $90 with a feeling I'll never see a return out of this seller GWA Auto. Never had an issue buying from Amazon until now, pushed me back to ebay for a lot of purchases.

Exact fit & function at excellent price

It can be really frustrating looking for quality replacements for parts like this, because there are so many vendors offering "alternatives" that may "fit," but aren't really the same quality or configuration as your OE. It doesn't help that Chevy/GM (and other "American" auto companies) have shopped so much of their replacement part business on older cars out to Chinese manufacturers. Even "tried and true" OE vendors like AC Delco are having many of "their" parts manufactured in China. GM/Chevy is doing it too. They contract with a Chinese company to make the parts to conform with OE specs, slap their packaging/labels on the parts, and charge you more for them ... for GM/Chevy parts, a LOT more. I have ordered a lot of such parts for my 2001 Suburban, mainly because there's nothing else available any more. This particular blower fan is made in China, and I did find it to be almost identical to my factory OE. Getting the blower out of its fitting and the new one into place is "easy," as everyone has said. Getting AT the location where the fan is installed, however, not so easy. It's literally at the bottom of the dash/HVAC unit, right above the floorboards, all the way forward to the firewall. Getting two free hands, a light, AND your eyes in there, close enough to see what the h*** you're doing, is murder. Even harder if your vehicle still has the original, insulated bell housing covering the base of the fan. The padding/insulation in this housing helps to hold the fan snugly in place and minimize vibration. The front screw securing that housing in place is easy to see/get at/remove ... the one in the back is nearly impossible ... you can't see it at all, you have to feel around for it and wedge your wrench between the floorboard and back of the housing to get at it. Once I finally located the screw, got my socket on it, and successfully removed it/the housing, I had to give up trying to put the rear screw back after I had installed the new fan. Hard as I tried, I simply could not get the housing in the exact position needed to get the screw re-set/re-started in the hole it came out of. Other than that, the fan itself went in fine, with all the connection points being a "plug and play" match for my OE, and it seems to be working just as well so far.

Funciona bien sin detalle asta el momento

Great fit, works well. 1988 dodge ram.

Excellent price, works just like the original Heater Blower Motor that came with my van. very quiet as well. Very pleased with this purchase.

Perfect easy to fit and not bad quality for the money. Blows really well in the Touareg. It is noisier, but blow much better than the original fan. I'm super happy with it.

وصلتني القطعة وبعد تركيبها طلع فيها صوت