– ABS+ Filament 1.75mm, Low Warping 3D Printer Filament ABS Plus, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black

This is the best abs I've probably ever purchased. It printed a large item in the cold night and did not even warp by a fraction. Didn't even need an enclosure. I really hope the next purchase is as good as this one!

Easy to print. Good filament, can get nice finish print. But the adhesion of the abs+ layer is not better than that of the original abs standart filament.

Alright folks, today I want to talk about the eSUN ABS filament. Now, I've been using this filament for a few years now and I gotta say, I'm pretty impressed at the long term quality. First of all, this filament is tough. I've printed some pretty complex and intricate designs with it, and it holds up really well. The prints come out with a nice finish and the material feels sturdy and durable. But the real kicker for me is the color options. This filament comes in a wide range of colors, and they all look amazing. I've printed everything from funky, psychedelic designs to sleek, professional-looking prototypes, and the colors always come out vibrant and eye-catching. Now, there are a couple of downsides to this filament. It can be a bit finicky when it comes to printing temperature - I found that I had to experiment a bit to get the best results. And the smell can be a bit strong while printing, so you'll want to make sure you're in a well-ventilated area. Overall though, I'm really happy with this filament. It's a great choice for anyone looking for a tough, versatile material with a wide range of color options. So if you're looking for a solid ABS filament, give eSUN a try - you won't be disappointed.

The only good ABS you can get on Amazon UK. Very fragile filament if you don't dry it and print in cool enviroment. It's perfect once you setup your settings. It workd out great for me only after filament got completly dry, 250c first layer and further 240C, Fan completly off, used encolsure, 0.4mm nozzle, 96% flowrate, 0.24mm first layer height, with applying primafix on bed for better adhesion, speed first layer 20mm, and regular 50mm. Hopefully this will help somebody. Spent almost a whole spool to get this ABS printing. Changed to 5 star. Thanks Update This ABS+ is great. Could achieve stuning results only on a Voron printer, with custom settings in Superslicer. Bed 110, first layer 260, rest on 250. Prints fine on Ender as well, you really have to setup the slicer.

Prints fine but it’s so weak and has terrible layer adhesion

I don't often feel moved to review stuff, but felt compelled to in this case. I've been 3d printing with ABS for years, using a wide variety of filament brands. In my experience, there are only small differences between them. Compared to the rest, this eSun ABS+ really stands out! The precision and detail I'm getting with the same settings I use for normal ABS are spectacular, and it doesn't string. I've had no problems with bed adhesion or 'crumbling parts', as some others have reported: they come out strong and sturdy. It has a more matt surface appearance, which might not be be as appealing to some, but sands and slicks pretty well. I've only tried black so far, but am intending to buy some other colours. Well done eSun!

I have always opted for eSun filament, ever since I had my first 3d printer (started with their PLA+). Having now got an enclosed printer, I wanted to try out ABS filament. I have to say, printing with it is an absolute breeze. I used the stock profile (with adjustments for walls, infill, etc to suit my application) and hit print. Being ABS, there is a smell. I have added a carbon filter to the rear of the printer and have the ability to print in a spare room that I can close the door to and open the window. I have printed several things so far and not had a single failed print. The filament and subsequent print quality are both very good. When I need to buy more ABS, I will certainly be buying this again.

Got this in summer, as I wanted to try abs and acetone smoothing, it's a really forgiving filament that needed minimal setting dialing in, I printed a couple of benchies quickly they came out looking good, warping was minimal but I let the print enclosure heat up before printing and it was summer at the time. Odor wasn't back for abs. Only problem is I wanted abs to do acetone smoothing as I hate sanding prints and it just doesn't smooth I left a benchy on mesh 3cm above the pool of acetone on a windowsill for 4 hours also that happened is it went soft and matt finish.

I've used a variety of eSun filaments at this point, mostly PLA and PLA plus, this is the first ABS I've gotten from them and the first ABS I've ever printed with and let me tell you, this company really has their filaments down pat. Everything I've ever printed with eSun filaments has turned out phenomenally. And with this ABS, I truly expected a fight. Its supposed to be more difficult to print with due to warping and all that good stuff, but this ABS+ formula has everything you could desire for the perfect print. Its strong, has a beautiful matte sort of finish that makes it soooo much nicer looking than black PLA, its temperature resistant, AND holy cow is it easy to print with! I ran basically default profiles for everything in Orca and didnt have the slightest problem. Even printing without a brim, raft, or skirts, my first few prints went off without a hitch, which truly surprised me after fighting SOOOO hard with PETG right before this. I will say that ABS is traditionally considered to have some hydroscopic tendencies from what I've read, although not nearly as much a PETG for instance. I can't really say I experienced that with this filament. To be entirely honest, I threw it in the drier before hand anyway. But with PETG it seemed like if I didnt keep the drier cranked on full blast 24/7, it was so wet by the time you came back to print it was basically unprintable (depending on the brand). With this ABS, I forgot to turn the drier on a couple different times and never really saw a huge difference at all. On some layers it would seem to get a little flakey, if that makes sense. Almost as if it weren't laying down in a perfect layer or something. But it was, check out the photos for proof. It truly resulted in nothing but fantastic results on every print despite my observation of the strange flake that seemed to come off some of the solid infill layers as it printed. As I said, I'm rather new to this, so maybe all ABS just does that. I did have to add a brim to one print that warped a bit because it had such a small footprint on the buildplate AND because that side of the plate ended up slightly out of level when I checked it. I re-leveled the bed, added a small brim, and the next print went off without a hitch. Finally, ABS has a reputation for smelling horrid... Though while this filament does give off a faint "burnt plastic" kinda smell after you've been printing it legit all day, to me the smell wasnt potent enough to bother me in the least. Then again, my nose may be screwy, cause I can inhale resin fumes like its going out of style too without the slightest side effect. For the time being at least... lol. (I do use PPE while handling resin, Im just pointing out that my nose doesnt seem to be quite as sensitive to it as other people's does.) For the newbs out there like myself who have never printed in ABS before, I have added my basic slicer settings via screenshot, but if your working in Orca particularly, your basically fine to go with the default ABS profile and the default for your printer and nozzle. I would suggest turning the speed down just a hair, but it prints fine at full speed too! And MAKE SURE your cooling settings are dialed in or you risk cooling too much and causing warpage. Same goes for printing with an enclosure, it is ABSOLUTLE NECESSARY with ABS to avoid warpage. I would also recommend using a PEI plate for great adhesion, personally I used a textured PEI plate and had amazing results with minimal failure. I for one will be purchasing ABS from eSun again in the very near future, and in all honesty, I don't believe I'll go back to printing black in PLA at all unless I just need something with a gloss finish to it. This matte finish on the ABS from eSun is amazing, and I love it, and I want more of it. Haha.

Mała kurczliwość

Ich bin komplett zufrieden mit dem eSUN ABS+ Filament. Ich nutze es auf einem Bambu Lab A1 in einem selbstgebauten Gehäuse, gesliced mit Bambu Studio – und es läuft absolut problemlos. ✅ Hervorragende Druckqualität – saubere Layer, sehr gute Haftung, kaum Warping. ✅ Einfach zu verarbeiten – auch bei größeren oder längeren Druckaufträgen stabil. ✅ Material ist robuster und weniger spröde als normales ABS. ✅ Lässt sich gut schleifen, kleben und nachbearbeiten. ✅ Spule kommt ordentlich aufgewickelt und trocken verpackt. Ein rundum zuverlässiges Filament für funktionale Bauteile – ich werde es auf jeden Fall wieder bestellen. --- Title (English): Reliable ABS+ Filament – Prints flawlessly with Bambu Lab A1 (English): I'm completely satisfied with the eSUN ABS+ filament. I'm using it with a Bambu Lab A1 in a custom-built enclosure, sliced with Bambu Studio – and it works flawlessly. ✅ Excellent print quality – clean layers, strong adhesion, almost no warping. ✅ Easy to handle – stable even with large or long prints. ✅ Stronger and less brittle than regular ABS. ✅ Great for sanding, gluing, and post-processing. ✅ Spool arrives neatly wound and well packaged. A truly reliable filament for functional parts – I’ll definitely buy it again.

EXCELENTE FILAMENTO

Il filamento eSUN ABS+ è diventato uno dei miei materiali di base preferiti per la stampa 3D, grazie alle sue eccellenti caratteristiche. Qualità di stampa: La qualità di stampa è molto buona. Il materiale si comporta in modo stabile durante il processo e offre finiture solide e durature. È ideale per creare parti robuste e resistenti. Warping: Una delle caratteristiche che apprezzo di più di questo ABS+ è che il warping è ridotto al minimo. A differenza di altri filamenti ABS che tendono a deformarsi durante la stampa, questo mantiene una forma stabile, facilitando la realizzazione di oggetti anche di dimensioni più grandi senza dover utilizzare superfici riscaldate o tecniche aggiuntive. Resistenza e durevolezza: Il filamento offre una buona resistenza meccanica, che lo rende perfetto per progetti che richiedono solidità e durata. È una scelta ideale per creare oggetti che potrebbero essere sottoposti a sollecitazioni. Facilità di utilizzo: Anche se l'ABS è noto per richiedere attenzione in fase di stampa, questo filamento si comporta in maniera stabile e senza problemi, anche su stampanti 3D a temperatura standard. In conclusione, eSUN ABS+ è un filamento solido e affidabile, perfetto per progetti che richiedono robustezza. È facile da usare, ha un buon rapporto qualità-prezzo e, grazie al ridotto warping, si adatta bene a una varietà di applicazioni. Lo consiglio a chi cerca un materiale di base resistente e di qualità per la stampa 3D.