DANCO Bath Tub Overflow Plate with Trip Lever, Chrome, 1-Pack (80991), 2 Inches

Add functionality and style to anyone's bathtub. Firstly, the installation process was a breeze. With clear instructions and all necessary hardware included, I had the plate installed in minutes without any hassle. The sturdy construction and premium materials ensure long-lasting durability, giving me peace of mind knowing that it will withstand the test of time. What sets this overflow plate apart is its convenient trip lever design. With just a simple flip of the lever, I can easily control the bathtub drain, allowing for effortless filling and draining. It's a small feature that makes a big difference in terms of convenience and functionality. I also appreciate the sleek and modern design of the plate, which adds a touch of elegance to my bathtub. The chrome finish is easy to clean and complements any bathroom decor perfectly. Overall, I couldn't be happier with the ANCO Bath Tub Overflow Plate. It's a high-quality product that delivers on both performance and aesthetics. I highly recommend it to anyone looking to upgrade their bathtub experience.

Great price easily installed good quality look fits perfectly durable

Perfect replacement and easy to install.

Works well. Shiny silver but feels cheap (it is) and was easy to install myself and fit perfect. I’ve had it a month and it seems to be holding up well. It fixed my bathtub drain not staying open from corrosion.

Easy to install. Replaced old tarnished one.

This review relates to: (1) the Pfister bathtub drain plug, with accompanying connecting rods (these appear to be of similar dimensions to the old ones), and (2) the DANCO bathtub drain overflow cover plate with built-in trip lever. The overflow plate and associated spring that retains the trip lever in up or down position are of non-ferrous material, which may resist corrosion (see picture). If the existing parts are intact, they can be removed by simply unscrewing the two crews that attach the cover plate to the tub, and pulling the cover, connecting rods and drain plug out of the tub. If there is any damage, it is likely to be breakage or disintegration of the existing connecting rods--especially at joints, where friction can cause wear. If the connecting rods are worn out or broken, it may be necessary to extract the plug with an old coat hanger wire with the end bent to form a large hook, or some similar contrivance. Be sure to save all the old parts. You may need to use some of them in the reassembly. Several reviewers have commented on diameter disparities between old and replacement plugs (and disparities in height and weight may also be an issue)--this applies to other brands as well as Pfister. Our old Briggs plug (probably 67 years old, like the house) was pretty raunchy, but after cleaning with sandpaper, emery cloth and polish, it looks almost as good as new. The Pfister plug was approximately 1 mm smaller in diameter than old one. It probably would have leaked. So I chose to re-use the Briggs plug. In the reassembly, the biggest challenge is inserting the cotter pin that attaches the connecting rod yoke to the trip lever. This is very difficult (but possible!). The Pfister hardware includes a cotter pin, but it is extremely difficult to get this (already bent out of shape) cotter pin through the openings in the yoke and the trip lever. The DANCO cover plate comes with a new (unbent) cotter pin, which can simplify the attachment of these parts. Note that, once the yoke has been attached to the trip lever, the threaded upper rod should be screwed into (or out of) the yoke in order to obtain the correct distance between the trip lever and the plug. After this is done, the nut on the threaded rod should be tightened against the yoke so as to hold the loop on the upper connecting rod in a horizontal position. This will permit the lower connecting rod to pivot freely where it meets the upper rod; and the lower rod’s connection to the plug should also be at a right angle, for the same reason. Once all the connecting rod connections have been made, it should be easy to slide the plug back down into its operating position. DANCO provides two screws with the cover plate, but these were too long for our tub. So it was necessary to use the old screws, although it would be possible to cut the screws to shorter lengths with a hacksaw.

Easy to put on but feels pretty flimsy. Had to buy caulking bcz would not screw on tight.

Great item and easy install

This was a great replacement for the old part which had corroded. Works as it should keep the old parts as you may want to combine some of the old with the new.

good quality for the money

replaced old overflow, this one fits perfectly, easy installation.

Malheureusement c'est trop petit comme circonférence

Fits standard tub overflow with pull-up drain plug, as advertised. If you're worried about losing the cotter pin during installation, tie a piece of string around it.