TotalBoat TotalBoat 5:1 Epoxy Kit (Quart, Fast Hardener)

Easy to work with. Great results

Great product. Learned about epoxy based resin and polyester resin on Youtube. Glad I found that info and I purchased Total Boat Epoxy to repair two snowmobiles. Both hoods one a simple crack and the other pretty much a big mess with multiple cracks and problems including a body with a torn out front hinge. On that I glassed in a couple layers of woven glass on the inside of a messy fiberglass tear after trimming it up a little. It's a vintage 70's sled with a fiberglass body. Duct tape was used as a soft form on the outside and it looks just great. Nearly zero transition between the epoxy and existing gelcoat. The repair feels as strong as the original if not slightly stiffer than the other side. I have yet to run it and see if the repair will hold. My prep work was very careful. Degreasing and lightly air sanding with a 2 inch 3M disc to expose fresh material to adhere to. Masking tape makes great dams and protects surrounding hardware I found. I am confident these repairs will last and I don't think I could say that if I were using a polyester based resin. I did pop the left over cured resin out of the mix cup and tried to break it. I could on the thinner cured part, but it was clear it was a pretty strong material. I ordered the fast cure and in a heated shop at 70 degrees it took a long time to cure I thought. Just about two hours. And I am reading that that is normal at that temp. I am however very used to automotive products cure times which is much quicker as in minutes. No hurry with this stuff unless it's very warm out. Wear your PPE as this stuff has a strong odor till it cures. And it sticks to everything. Gloves and disposable brushes are a must. Overall the product was great to work with. I see many other applications for this product. I have only used fiberglass products a couple times before. So an amateur I am. Good stuff. Great strength. Easy to work with. I measured and did not use the dispensers. So I cannot comment on those. 5 stars

Beautiful result on our cedar strip canoe.

Best epoxy for carbon fiber. We are asking seriously stong structural material with this.

Had only bad news from all the 'pool pros' about our freeze damaged skimmers leaking. 3 layers of this fiberglass/resin seems to have made a great repair, stronger and more durable than the parent materials. Easy to work with, and I've never worked with this material before!! Great fix. Lots of potential uses!