Orion Motor Tech Pneumatic Injector Puller Set for Diesel Engines, 23pc 5-8 Bar Air Vibration Injector Removal Tool Kit with Extractor Hammer, 19 Adapters, Extension Hose, and EU US Connectors

The media could not be loaded. If you're changing our your fuel injectors then I cannot recommend this highly enough. The video shows the immediate effect. I only recorded this so I could show how they work to someone I was having a conversation with. It took less than ten seconds to completely release the injector. I'd hooked it up, hit record, opened the valve to about 1/8th of it's full open and pop! Injector liberation complete.As you can see from the excellent condition of my engine, it had a "small" leak on injector 2. By small, I mean I spent about 2 hours cleaning carbonized fuel (black death) out of the fuel injector housing before I could even access the bolts and then attach this. I didn't even try anything else to get it out, it was clearly going to be an energetic and fruitless endeavour. When that damage was noticed about a year too late it was clear that I'd have a nightmare of a time with a slide hammer so I didn't even bother, I just bought this. This device just makes it so simple.Hook it up to an air compressor, choose the correctly threaded adapter and screw it on. Opening the flow valve starts the action and moments later you've saved yourself a ton of manual labour and time. It's so satisfying.I also noticed an actually small leak on injector 1 but alas the oil filler was in the way, and it was interfering with the throw of the pneumatic hammer. But happily... you don't NEED to tighten the connector attachments all the way down! I found that with just two full turns on the adapter on to the injector, and two turns of the injector on to the adapter I had enough thread engaged to also pull injector 1 even with the very tight clearance. That's about a quarter of the available threads. I don't recommend this, but since this was my car and it wasn't going to fix itself by not trying, I took the risk and it worked. This is something to take in to consideration if you're looking to buy: a lot of engine housings have frame in the way, or other parts! Often times you'll find yourself working under the wipers, or really close to the lip of the windscreen. This tool might not fit then. Some engines have their airflow hosing / filters right in the way. Some parts you can strip out (like air hoses & filters), other parts like my oil filler are not removable! If space is limited expect to have to get creative but lets face it: if you've got a stuck injector and you want to see it pop out like this... this is really the only type of tool that'll do the job.I'm very happy with the quality of this whole package. The connector hose is very high quality. The valve works. The connectors on the hose are great and you get a little roll of PTFE with it too, which is a nice addition. The adapters come in MANY sizes. I am sure that there are oddball fuel injectors that will not have an adapter that fits, but you can probably work around that by making your own. If this is a tool you're looking at then you're probably at least a decently kitted out amateur and you can always weld one up. Find a bolt or a nut that fits your injector and sacrifice an adapter that you don't need and make your own connector. You could even use a nut off of a fuel line, that'll definitely fit. If it doesn't: there's your problem.As for the tool itself: it's a heavy lump of metal with a connector on the bottom for attaching it to your injector (the connector spins freely) and an air hose connector on the side to attach the air hose provided. It comes with UK and EU air line adapters! I never realized that, but this is useful. You can swap them out on the end of the provided hose with the valve that you can attach to your compressor. I didn't need to buy any adapters, my compressor has a line with a UK female fitting, so the UK make fitting that came with this kit worked perfectly with it, no fuss. It needs a 15mm spanner to connect the hose to the tool.Air compressor not included. I have a TITAN brand one, a cheap one from Screwfix, 24 litre max 8 bar pressure. Given the ten seconds I had to use it my compressor was easily enough for this task. I expect that most amateurs who have one will have one similar, and if you don't have one then I can vouch that this arrangement worked well for me. I'd be surprised if this didn't work with a smaller one too quite frankly, but I can't speak to that. The tool specifies a 5 to 8 bar operational pressure range and I believe it.Comes in a sturdy blow moulded box with clips that can fall off but never do when it's clipped closed. Box has a foam liner insert on top and all of the parts fit in nicely, not much or any rattle at all.I genuinely cannot recommend this tool highly enough. It only does one thing but it does it so well. I've been stuck pulling injectors in the past with a combination of levers, slide hammers, and prayers. Admittedly sometimes it's easy but when it's not, you're literally stuck. This is the unsticker.I mean... just look at the video. It wasn't even operating anywhere near its full power. Outstanding performance.

Doesn't include adaptor to suit injectors on a vw 1.6tdi, but fitted the pneumatic unit to correct puller and worked perfectly. Injector out in a matter of seconds. Well worth the price

Excellent tool for seized injectors. Wish I videotaped it in action. Very impressed and saved a lot of time.

The media could not be loaded. Perfect tool for removing stuck injectors

Well presentedQuality outstanding, well made and built to last, works well and as it should do.Really handy in lots of circumstances and useful to have as a back up.Would buy again.

This is a very useful tool set, when it comes to removing the diesel engine injectors. It really helps to remove injectors very fast and in efficient manner.The toolkit consists out of 23 PCs which made out of hardened steel, ensuring durability and longevity of service.It is also in important to highlight the compatibility of this tool, you may use it on a range of diesel vehicles including trucks and cars.Indeed, this is efficient and reliable toolset for car repair mechanics and DIYers, which are dealing with diesel injector removal.