✨ Pour Deep, Shine Bright — Elevate Your Craft with Crystal Clarity! 💎
KISREL Deep Pour Epoxy Resin Kit offers a professional 3-gallon 2:1 mix designed for up to 4-inch deep pours. It features low odor, fast bubble release, and self-leveling flow for flawless, crystal-clear finishes. With a hardness over 85D and UV protection, it resists yellowing and scratches, making it perfect for river tables, countertops, and artistic projects requiring durable, high-gloss results.
C**L
Question
It’s a great epoxy , I’ve done a bar top and formed the sides also , my pour is about 3/8 deep, just needing to know when I can remove the form?
H**D
Does what I purchased it to do. Will buy again.
Very nice Resin for deep pour. I poured some candle holders in one pour. The molds were at least 4 inches and took 8 oz of Resin.
P**R
could have more informative detail
I was concerned when I got the stuff. Granted i'd not done lots of epoxy, I do a lot more solid wood projects using traditional glues. It had a type A and a type B but it didn't say anything of which was the hardener but stated to use 2 parts of resin to one part hardener. Ok, I could deduce which was which but it would have been NICE if they SAID, B is hardener... I did stir carefully for 3 minutes. Loaded up a syringe and injected it into the voids. QUITE liquid, easy to flow out. Figured it would harden somewhat in a few hours, but not cure for 24 to 48 hours. I was a bit concerned after 24 hours when it appeared to be still totally liquid. My shop is not cold, but not hot either. Temp was probably 62 degrees at night. 48 hours later it was just setting up, skimmed over on the surface. I felt maybe it was going to harden. 72 hours later, it was hard! So it works, but you sure can't do much with a project for 3 or more days!
R**Y
Great
Good stuff worked great easy to use
H**K
Great product for the purpose!
Worked great. Long cure and work time!
D**
Deep pour epoxy
Expoxy product came out great poured 3-4 inches np
A**E
Only 88% of what I paid for!
The product seems to do what it’s supposed to. Seems to level well and there are virtually no air bubbles, BUT, I was 8 ounces short of the part A product, which means I was unable to use the last 16 ounces of part B. This means that instead of 384 ounces of mixed product I only had 336 ounces! That is 12% less usable epoxy than I paid for. That is unacceptable.
C**N
Cure time very high. Might not be best for large projects.
Not curing!!! At 24 hours it is as liquid as it started. It took 72 hours to begin to harden, but it did eventually. As long as you aren’t in a hurry, it is a good price for the amount. It scared me that it might not cure because I was using it on a large table.
Trustpilot
2 months ago
1 week ago
