1PC Roller Stand

Positive: Heavier and better built than expected. Perform well, stable on shop floor, and easy to use. Stands are of thick tube wall and have no complaints after cutting full sheets plywood with table saw and stands. Negative: Had movement of stands on the floor and some height movement with legs spreading apart a little under weight. Will add brace between the two legs so there is no play in height with weight and put weights on floor contact point to stop all movement. Overall: Unless spending a lot more money these are great. The minor issue with movement is exceptable for lighter weight stands. Would purchase again.

The two roller stands I purchased appear to be well designed and manufactured. They look nicely finished after they were assembled. Assembly was straight forward with the tool furnished with the stands. The rollers move easily and smoothly. Roller height adjustment was easy, stable, and worked well with my table saw, pointer, and planer.

Sturdy roller stand with adjustable foot and edge guard to prevent material from wondering off the side of roller. Roller functions good with no dragging. Height adjustment is easy and feels secure. Easy assembly takes 5 minutes each. Cons are machine tolerance for T bolts to loose and roller mount allow to much movement. The wrench that is included for assembly is to short to be of use and your a tool company. You have a chance to show case a quality tool to get interest in your tool brand and you send a junk wrench. First impression is quality roller stand, the hand tools?

First off, I should say that I'm pleased with these stands. The quality of construction is great they work well, the bearings are smooth, and, at least by my standards, the value was excellent. Packaging was also sturdy, so the product arrived unharmed. The height adjustment works well, though is a little odd. The adjustment screw bears on a flexible plastic tab inside the top of the stand's leg so as to impinge on and grip the chromed movable bar. This definitely seems to work, but I'm a little concerned that if the tab were to wear out or break you'd be a little screwed. Still, it does work, it grips the chromed bar well, doesn't scratch it up, and gives continuous adjustment, which is important for a stand like this (unlike a stand with drilled hols into which you'd have to set a pin. The adjustment knob on the one leg does provide leveling adjustment, but only within a limited margin. If you're working in a workshop with a slightly uneven floor than it'd stop the stand from wobbling, but it won't actually level the roller with respect to your saw's table unless you're lucky. What's more, if you're planning to use these stands on a job side on rough or sloping ground, then you really won't be able to get things both stable and level. I expect that for most of the target market this won't be too much of a problem, but I thought I should mention it. The only real way to address these issues completely would be to have fully adjustable tripod legs, which would bring a different set of problems (more expensive to manufacture, harder to make fold up neatly, harder to set up, less stable if you're lucky enough to have an even floor. Given what I've said above, and wanting to reiterate my overall satisfaction with this item, I might as well voice my one gripe. When you want to fold up these stands and store them somewhere, there's no good way to hang them up. If there were (say) a central eye on either the longer bottom leg or on the top T-bar, then the stand could hang on the wall easily. Absent this, you have to use two hooks of some sort to stop it from sliding off. Neat storage is important in a workshop (or cramped garage), and it's always a little strange when otherwise entirely satisfactory products are marred by a little thoughtless design. FWIW, I had a bunch of spare hooks left over and they work well ( https://www.amazon.com/dp/B0FRNNL9BX ).

These worked well on the infeed and outfeed of my planer. They are easy to adjust. They fold up and store easily under the planer stand that I built. Keeping long boards supported helps minimize snipe. I did have to add some 3D-printed feet to the legs to keep them from rocking because my shop floor is so uneven that the primitive screw adjustment was inadequate. The 3D-printer file is available on the web for free. Just search for it on the usual printer sites.

This unit is simple to set up & use right out of the box. I purchased it due to the fact that most work I do in the shop I am alone & need a roller when cutting plywood or long boards, I do not wish to fall off my table saw, The roller unit has slide bar for height adjustment and end stops for smaller boards to keep them in place after you cut them down. It is a great shop tool.

This is EXACTLY what you need to hold up 4 x 8 sheets of plywood. I use this on my infeed side of my table saw, and it works Great..! Helps stability of a full sheet of plywood. If you find yourself cutting large sheets of plywood, this will greatly help...!

Works. Just not the greatest quality. You get what you pay for. One of the pins on one unit doesn’t lock bc the powder coat finish won’t allow the plate to engage. So it’s useless. Unfortunately, I missed the return window. I was just unlucky in the one I received. I’m sure it’s 1 of every 25 that are like that. I would buy again and just return if same issue.

Excelente ayuda en el taller, ya no es necesario que alguien te ayude cuando trabajas con piezas grandes.

I love this stand—it makes cutting wood on a table saw so much easier! It's sturdy, and very easy to adjust the height in situ. It also folds down for easy storage. Would strongly recommend a pair for cutting longer pieces of wood.

el articulo viene de muy buen material y facil de uso lo recomiendo

Excelente y rápido llego