LITTLE TREE 82.67" Long Executive Desk Large L-Shaped Computer Office Desk with 3-Drawer Mobile File Cabinet, Industrial Business Furniture Desk Workstation for Home Office, Black

I recently purchased this work desk, and I couldn’t be more satisfied! It’s the perfect blend of functionality and style. The spacious surface provides plenty of room for my laptop, monitor, notebooks, and other essentials, without feeling cluttered. The design is sleek and modern, fitting seamlessly into my home office setup. The desk is also incredibly sturdy, which gives me confidence that it will last for years. Assembly was straightforward and didn’t take much time. Whether for working from home or a dedicated office space, this desk is a fantastic investment for anyone looking for a quality workspace. Highly recommend!

My wife and I spent a long time shopping and we had difficulty locating a desk the fit our needs. We were looking for a corner desk that would seat both of us sitting side by side comfortably. It had to be deep enough that we could lay things out comfortably. It needed to fit between the window and the heater on the long side, and the short side needed to allow a wide access to other parts of the room. It needed to look right with existing room colors. Lastly, it needed to be reasonably priced. This desk was the result. First, the positives: - Every hardware bag had one or two extra pieces (photo attached showing extra parts) - The desk looks good and feels strong once fully assembled. - The seams line up reasonably well. - Fits our location perfectly. - Reasonable price. - Packaging is secure and protects the parts well for shipping Second, the negatives: - One of the support legs has a dent in the flat metal panel. This dent could not have happened during shipping since it was packed between two other panels. (Photo attached) - The top corner panel has a chip on the top surface at one of the seams. The chip was filled with a waxy grey substance that seems to have been applied to help hide the defect. This tells me that someone was aware of the defect and chose to smear some wax in it and pack it anyway. (Photo attached) - The assembly could have been much easier if both support frames were assembled separately then both pieces could be turned over and attached rather than having to turn over the entire support frame with two points trying to swivel. (Had to retighten several points after flipping it). The holes drilled for the screws that attach to the cam locks are too large. The screw spins out with very little force. This is especially true with the drawer fronts. I had to put wood glue in the holes and let it bond the screw into the hole before I felt comfortable attaching them to the drawers. Considering the defects and poor quality control, I was leaning towards a 3 star ranking. However, I really like this desk. So, it gets 4 stars.

Looks great in my home office setup, assembly wasn’t too bad but I did build it in an different orientation than what instructions provided; wish it could have both orientation setups in manual but other than that looks good and feels well built.

Little tough putting together. Definitely need two people. Otherwise and excellent desk with lots of room.

This desk is NOT reversible... Which shows it IS in the video with the photos in the Amazon description. I wanted the long side to my right as your sitting facing the corner of the desk, short side to my left. The instructions are bad to begin with but the manual shows the desk long side to the left, the short side to the right. Nothing is mentioned in the instructions about reversing..... If you simply try and flip the frame, the holes for the table top and wooden front with cam locks, do not line up. I called Tribesigns support and they said the desk was NOT reversible. So I then called Amazon support and they said it shows it is reversible. When I told her I had just called Tribesigns support and they said it was not reversible, all she offered was to return the item... Spent hours removing from box, ensuring each piece was there and not damaged. Only to assemble (which were not clear....) looking at different Amazon pictures only to now find out the desk is not reversible..... Be aware... the model in the Amazon description shows Little Tree QP083A. The Tribesigns manual lists multiple models HOGA-HL0259,0261, 0262 and 0263. NONE of the model numbers show up in search for YouTube videos as. the Tribesigns manual suggests..... What a waste of time....

The instructions suck you NEED 2 people to build the frame is very flimsy you need to be careful or it will probably break during assembly. The desk its self (when you're finally done building it) is pretty nice its huge and the quality of the desk is pretty good I have 3 big monitors my desktop and a tv sitting on it and its showing no signs of breaking. one part of the frame was bent went it arrived fortunately or unfortunately it was easy to bend back and use it anyways.

Really nice! Looks like the picture. Assembly was not difficult, but does take 2 people. I did have a little damage on the top of the desk, but a black marker filled it in and you can not even see it now. This comes in 2 boxes. So hopefully you get them both at the same time. If you want to assemble in reverse, there are instructions in the rear of the manual.

The whole assembly process was a mess, but now I'm stuck with this thing in the room so I'm going to have to give it a go. The metal supports for the long end of the desk were poorly designed. They consist of two pairs of 4-sided rods, but rather than design one end of a rod to be tapered or smaller in someway so that it can fit inside the other rod, it simply has a small, thin piece of metal welded on to one of its 4 sides. This small piece of metal has two holes through which you secure it to the end of the other rod. Right out of the box, the small metal pieces on both rods were warped/bent. They could be bent back, but were still warped and would not fit flush. The instructions aren't great either. You start off connecting what will be the support frame that will be underneath the wood surface of the desk. However, at one point, it inexplicably reverses the orientation of the desk without explaining to you how it got there. I thought they simply rotated the perspective, but I believe they intended to convey that I needed the flip the support frame over before attaching the legs. I admit, if I had simply been observant rather than trust the instructions, I would have realized I was heading down a doomed path and could have saved myself. Those two warped pieces of metal I mentioned earlier? You want those to be on the bottom once the frame is "upright". I ended up with them facing upwards, so naturally the wood board could not quite fit flush against that section of the frame and no I didn't take it all back apart to fix it, I was 5 feet from the finish line so I just bolted the rest in and I'll just have to see how it turns out over time. IF you're convinced I'm an idiot (and honestly, you're probably not wrong) and still decide this is the perfect desk for your needs, I have a couple more words of caution. The orientation you want the desk in will need to be decided early on. You are not building two separate desks and then connecting them with a corner piece; the frame is interconnected in a way that does not allow for quick re-orientation. If you follow the instructions and manage to follow the leap in logic that I didn't catch, the short end will be on your right if you are seated at the middle of the long end of the desk. If you want to reverse it, you will also need to rotate the vertical boards that hang under the surface of the desk 180 degrees, otherwise the holes along the top will NOT line up with the pegs you screw into the surface boards. If you try this without rotating the vertical boards, the surface boards will not meet with the corner piece and there will be a sizeable gap. Finally, I strongly recommend reading ahead through the instructions so you understand where those vertical boards are going to go, and connect them to the supports/legs BEFORE you attach the supports/legs to the desktop frame. IF you do not do this, the inner legs nearest the connecting corner of the desk are just screwed in from the sides and will freely swivel on the screws as if on a hinge. If you follow the order of the instructions, you'll attach the legs first, flip the frame upright, and then somehow try to screw these vertical boards in from the sides. I believe they do recommend two people for assembly, I clearly needed someone smarter/more observant than me, but let's face it, some of us don't have that option. Also, sorry this bit is out of order, but when they ask you to flip the frame around, keep in mind that those two long pieces connected by the flimsy little strip of metal are flopping all over the place. I feel lucky they didn't just snap off in the process. Flipping it really felt like an operation of hope and a prayer. The end result seems sturdy, for now, but there are minor flaws in the wood surface, the surface fitment at the seams is uneven between the short end and the corner piece, which is odd considering I feel like the short end had no issues otherwise, you'd think the long end with that nasty bump under the surface that was mostly my fault would have made that end grossly uneven. I can't say I'd buy this desk again, but it also took me a long time scrolling through Amazon to find one with dimensions even remotely close to my old desk, so I may have still risked it had I known what I was getting into.

Amazing better than I expected. So easy to assemble I would highly recommend this product. Packaging was great and desk was well protected.

El ensamble es un poco complicado, el escritorio en general es bonito, sin embargo no me llego el archivador móvil.

Es un producto de calidad cuestionable, en general tiene buena apariencia, el sistema de ensamble podría ser mejor, los cajones chocan entre sí al abrirlos y cerrarlos, el empaque es poco resistente y genera daños durante el transporte. Lo compré por el tamaño que no es muy común pero el precio me parece alto para la calidad y el tipo de mueble, en general no lo recomiendo.

First desk they sent wouldn't assemble properly because it was stripped, I contacted the company and it took awhile but they sent me a new desk free of charge! While they new desk assembled properly for the most part there are pegs that connect the the back board to the desktop and the holes they have cut out didn't match, the backboard is still supported on the sides and so far nothing structurally has happened so I'm still giving 4 stars.

Decent quality for that price. Made easy to assemble- easier than Ikea