Smatree Battery Charger Compatible for DJI Phantom 4/4 Pro/4 Adv (Charge 3 Batteries One by One, Convert Phantom 4 Battery into Power Bank, 15.2V Output)

I have two batteries for my DJI Phantom 4 charging them was hard work. I usually put them in storage mode, so when I want to fly my drone it means the night before I have to charge the batteries. I usually don’t get back from work till late so I set one battery away charging, then set an alarm to wake up an hour or two later to switch them over and charge the second battery. I was put off the official DJI one as it is considerably more costly and charges the batteries in sequence instead of all together. With this Smatree charger I can put both batteries in and not worry about them, they charge to 100% every time and it charges the batteries all together (unlike the official DJI one). The batteries fit perfectly into the docks, no wobbling or loose connections. It uses the original charging lead that comes with the drone so no need for extra cables, also when on a smooth surface there is a rubber lip on the bottom so it doesn’t slide around if you knock it. It works when hooked up to my car charger too, so between driving to locations I don’t have to stop the car to change the battery over once one is fully charged, just leave them to it and concentrate on the driving. The discharge function I’ll be honest I don’t and probably won’t use (as I have it set for 3 days discharge through the DJI app and have external batteries for phone/iPad etc). However it is handy to know its capable of this should I forget to bring an external battery, and its 5V/2A so it will provide a quick charge too. I do use this USB port to charge my iPad while the batteries charge in slots 1 and 2. My only frustration with it was that its slightly too long to fit in the DJI styrofoam case (the width and height are perfect), so to fix this I cut two nubs off the inside of the slot in the case, now it fits no problem and I take it with me as part of my daily kit! (see pictures). Highly recommended to any P4 or P4 Pro owner, cuts all the hassle out of charging!

Only arrived today, but happily charging my 2x5870mah P4P batteries (in sequence). A nice white gloss surface which matches my Phantom and accessories. Contrary to other reviews here, it charges high-performance batteries, and they fit perfectly. As this uses the original DJI charger, there is no way it could be faster than the charge time for two batteries, and may indeed be slightly slower, but this is made up for by the fact that I no longer have to wait to swap over the batteries when one has completed charging. Also, as has been pointed out in comments, this is NOT a *discharger* (the batteries do that for themselves), but you can use the battery/batteries in the hub to power a USB socket for phones etc. All I wanted, and expected it to be. And massively cheaper than the DJI equivalent. Good job, Smatree.

I’m happy with the multi charging system

Charges the P4P batteries quickly and in sequence (not at the same time). Can also use batteries to P4 batteries to charge devices in an emergency. Lost one star as could be quicker... tested and it takes longer than charging 2 batteries individually. However, it’s more convenient and the price is excellent.

Does the job and does it well. Charges beautifully. The USB addition is a great idea and allows for your screen (or any other device) to be charged at the same time. It looks good and fits in with the white of the DJI Phantom 4 Pro.

Doesn’t work. Had three batteries plugged in first thing in morning, came home after work to find that nothing had been even remotely charged yet lights on batteries were still flashing away as if charging. It was either faulty or takes a week to charge the batteries, either way it is as useless as a chocolate teapot.

Ideal, perfect to use a genuine "plug and play" item. I keep it in the boot of my car with 2 batteries always charged and ready to go!

Good value product with added feature of charging usb devices off battery. My only criticism is the fit of the battery is very tight and you have press down quite hard to insert them properly

Originally I thought I was just buying a charging hub, but it's more than that. I had looked at the DJI hub and couldn't justify the cost. Then I found this Smatree Charging Hub for the Phantom 4/4 Pro and jumped on it. Was only $24.99 with the coupon applied. I would have been fine with the normal cost to be honest. When the package arrived I noticed right away you can charge your other devices off of it using the built-in USB port. While traveling I don't always have a lot of outlets available to charge all my cameras and devices. Having this extra USB port is really handy. PLUS, you can charge your device/phone using your DJI power cord, or using power from the Phantom 4 battery. Super cool! As for the charging hub itself, construction is nice and they even include a ring of double-sided tape on the back so you can stick it to a wall, the side of your desk, etc. Nice feature. The charger worked as you might expect. I plugged all 3 batteries in, walked away, and when I returned an hour or so later they were all charged up. I found it useful to plug each batter in one at a time, starting with the charge port/channel closest to the charge cord. Let each batter get going before plugging the next one in. Last I just have to say that, especially when traveling, I don't have time to charge one batter at a time, and I certainly don't want to wake up through the night to unplug and plug in the next battery. This hub fixed that issue. Go to bed... wake up... all charged... hit the road! :-) I made a video with a couple tips.

Super produits et bonne qualité

If you have more than one battery this is definitely a must-have. This is a great multi charger especially for the price. This still relies on the factory charger for Power. With that in mind it can not charge 3 batteries in the time that it should take to charge one just because three are plugged in. This will however alleviate your need to set there and watch while it charges all three so you can swap in between. The smart batteries may cause some weird charging patterns as well. For example if you get one battery charging and not the others that is not the fault of the charger but rather the fault of the batteries. The lowest battery will charge first until it reaches the charge level of the next battery. If they are all equally discharged they may all charge immediately as well but this is normal. The battery has overcharge protection and temperature protection as well. If you have just flown it and it is too warm you will get a rapid flash on one end of the four LED on the battery. If the battery is too cold you will get a quick flash on the other end. And both of those situations it will not charge until a neutral temperature is achieved.

This charger is IT if you want a charger that will load up the juice into 3 DJI Phantom 4 batteries and controller. BUT WAIT! THERE'S MORE!!! It also has a USB plug that allows you to charge your goggles or smart phone or iPad or whatever (just one at a time, of course unless you use a multipronged USB hub - I haven't tried that yet, but I may well do so) at the same time! I used the PENIVO 4 in 1 Multi-battery Charger, 3pcs Batteries + Remote Controller Parallel Balance Charging device before and it's a piece of junk. The circuits inside the thing weren't properly connected, so most of the time none to one or two batteries at best would charge at the same time and even then, I had to fiddle with the cables to get the green lights showing that it was charging appeared (or lit up red). DON'T BUY ANYTHING LIKE IT! At $19.99 the price is great for a product that works. There are look-alike docks costing up to $100 displayed on Amazon, I've seen, but why waste so much money money on them? I sincerely doubt they can deliver anything this charger isn't able to do.

Works very well