Colour Name:Red IF ORDERING GREY PLEASE LEAVE A NOTE SAYING DARK OR LIGHT GREY. NVP’s two part water based epoxy floor paint (available with or without an anti-slip additive) is a two part, water based high resin content epoxy floor coating for all applications where a high durability paint that is resistant to oil, grease and most chemicals is required. It is easy to apply with a standard roller or brush and has the added advantage of very low odour during application and curing. Once fully cured you are left with a very tough, non-toxic, waterproof and easy to clean surface. Other colours can be made to order, please contact us on 0845 430 4030.
K**V
using a roller the paint was applied in a very short space of time and was a really easy task. I applied a second coat 8 hours ...
Used this paint for the floors in my two single use shipping containers.There is a time restraint on completing the floor painting once the paint is mixed, using a roller the paint was applied in a very short space of time and was a really easy task. I applied a second coat 8 hours after the first coat, as the first coat of paint was still very tacky, but no real trauma.It took about 2 weeks to cure properly and is simply perfect for the job. I park a vehicle in one of the containers and there is no lifting or sticking of the paint to the vehicles tyres in hot or damp conditions. My vehicle also has a slight engine oil leak and the oil simply wipes off and does not affect the finish of the floor paint.I brought this paint because it was cheaper than the Dulux branded paint if I'm honest and the gamble has worked and saved my about £200.A very good purchase.
A**R
Lack of clarity in instructions can lead to a waste of money
Beware following the instructions on the tin!The mixing instructions state that the two packs be mixed together in the larger tin and then fill with water to the top.The recommendation is 2 or 3 coats of the product, and it needs to be tack free between coats (6-8 hours to become tack free).What isn't particularly clear from the instructions is that once mixed, the product will go off in 1 or 2 hours.So went to put the 2nd coat on after 8 hours or so and the whole tin has now gone off.OK, maybe I should have read the warning lower down on the tin, but I believe a better set of instructions would read:"Only mix what you will use in a 1-2 hour period". The mix ratio should be x ml of pack A to y ml of pack B.Encouraging people to mix the entire tins together and placing a warning lower down on the tin (after what temperature to store the product and so on) isn't helpful.I did speak to the customer services team regarding this but they thought the labelling clear enough.Can't really comment on the quality of the product - I've only got a single coat on (and a nice tin of solid resin left over).
Trustpilot
1 month ago
2 months ago
