Wire Crimper Tool with Stripper Cutter

Great Seller, Great Shipping, Great Product. Really pleased with purchase.

Easy to use and works great for small jobs.

Did you ever need to crimp a spade-type wire connector and wanted it to look professional, and more importantly, something you could be proud of doing? The Twidec/Wire Crimping Pliers 2.8/4.8/6.3 mm Spade 26-16AMG Crimping Tool is just the gadget for us amateur electrical hobbyists. In fact, the crimping tool is so good that it wouldn't surprise me if it is used professionally as well. Easy to use, it works on 2.4, 4.8 and 6.3 mm Spade-type lugs on wire sizes from 26 to 16 AMG. A good deal for the price and delivered on time. It might be something you should consider for an aspiring electrical tech. Or purchase it for yourself like I did.

Great kit, came with a wide variety of terminal ends. The crimper tool works well. You do need to be careful with aligning the wire end so you get a perfect crimp.

I finally had a chance to use this replacing the propane detector in my motorhome. It was different than others I have because the crimper is at the top, and stripper is close to the pivot, making leverage easy, since I have a bad hand and in close quarters sometimes choose my tool for me. Stripping was a sharp tool, I prefer the crimper at the top, sized so you may see it.

it worked

Average crimping tool. The grip is long for good leverage, but too straight and gets in the way when trying to insert crips into interior part. Not bad, not great

Good crimper kit and nice to have the extra ends. Nice and sturdy.

ممتاز للأعمال اليدويه

Great crimps work very well

These worked well crimping new open barrel uninsulated terminals. Much better than trying to make do with the older style crimpers that are used for insulated spade connectors. I used them with for 6.3mm (1/4" ) spade terminals with the locking tab that go into plastic connector plugs. These will not do insulated terminals., and I didn't try them with closed barrel terminals. The card for packaging is generic, there are no instructions. So you want to practice first to get the hang of it, and be prepared to trash a few terminals. The mechanism has a ratchet, so once you start to compress the terminal it holds until you reach full stroke compression at which point it automatically releases. WARNING: If you are using this on wiring gauge that is too large (ie 12ga) you can't compress to the release point. There is a manual release lever but you need to get a screwdriver or something to toggle it, not big enough to get your finger under. Ask me how I know ... The technique I finally settled on takes advantage of the ratchet. Holding terminal spade in one hand, position tangs in the jaw with the open side of the barrel pointing straight up into the deeper side of the die. Squeeze until the longer tangs engage in the die. Now that the terminal is grasped in the crimpers, insert the wire to the correct depth and continue to squeeze until full crimp is achieved. This works a lot better than putting the wire and terminal together in the crimpers with them wide open. Too many things for just two hands.

I can’t believe klien doesn’t make this. I looked hard for name brand. This works great for flag terminals. The right tool for the job. Solidly made

This tool crimps well. I've done 200 crimps with it already. It opens a bit wide and the grip is hard plastic, but for the price it's excellent. It's a tad challenging to crimp but it's really not a big deal. With proper technique you can crimp for hours.