DOME GLASS Whitestone [Authentic Full Coverage] Tempered Glass Screen Protector for Galaxy S24 Ultra with UV lamp [2Pack]

So even with the flat screens there are still many benefits to using these protectors. Yes there are cheaper alternatives but every review I've read sais "this is cheaper and easy to install." To that I say, yes but have you dropped your phone? The real test isn't the installation. The real test is waiving your phone drunkenly at 2 am outside the club and watching your phone slow-mo clatter onto the concrete. I van assure you these survive that test.DURABILITY: I've used these on about 4 phones now and this is the 5th one. People always talk about how there are cheaper protectors but I've had experience with actual nasty drops on these and they have saved my phone every time. In fact I once didn't feel like replacing a cracked one i removed off of my old pixel 3xl and deeply regretted it cuz I dropped it soon after and the screen shattered.INCREASED VALUE: I am also usually able to resell my phones at higher value because when peeling these off for sale my screens are like-new. No scratches, scuffs, or marks and any light scratches are healed by the cured adhesive.FINGERPRINT REGISTRY: My fingerprints register perfectly on this. So much so I was using the included second protector to line up how I did after I installed it on my s24U and it was registering my touches through both protectors. Every cheaper, easy-to-install substitute, the reviews always talk about fingerprint issues or they need to be registered. I have never had that issue with these. It also leaves no fingerprint. The oleophobic coating on these is great for clammy hands like myself so I'm not constantly wiping my screen.INSTALL PROCESS: yes these are extremely tricky to install but they've made it easier over time, and with phones going back to flat screens, this is as easy as it gets. They also replace them under warranty which I've used before so if you botch one you can likely ask for a replacement. But it does come with 2 at least. If by chance you mess up both, you can buy just the glass parts without rebuying the whole kit which is much cheaper (around $10)CASE FITMENT: Currently using this with my spigen case (pictured) and no issues with fitment or lifting. Fits snug as a glove.TIP: easiest way to install this is right when you get the phone. Apply it in the bathroom after running hot water in the shower for a few min to let the steam bring down any dust on the air and follow the instructions to a T. Let the glue sit a little bit so every drop gets out. This is important as it will ensure there is enough glue to cover the screen. I cannot stress enough to follow directions to a T. Watch a few videos even.TLDR: these are pricey and they are tricky to install but with the rising costs of phones and this one being $1300 spending $30 or so to install this is a small sacrifice and is well worth it. Once installed right l, these don't disappoint. They have no fingerprint issues, will greatly reduce fingerprints, and will completely protect your screen from nasty drops. They even come with a limited warranty for replacements. This is still worth buying today despite the screens going back to flat.

I have been using Whitestone Dome since the first curved-screen Samsung phone. This is my fifth or sixth one.Is the installation a little tedious and nerve-wracking? Yes. Even after at least 10 installations (including multiple times on the same phone), I still get a little anxious putting them on. However, the final result is definitely worth it. I have cracked many of these screen protectors, but I have never damaged a single one of my phones. Whitestone Dome’s warranty is great—if you crack a screen protector, they’ll send you a new one. The process is fairly straightforward and easy.Another significant benefit is its ability to retain fingerprint sensing. Since Samsung uses an ultrasonic sensor, good acoustic conductivity is important. Having a solid interface between the screen and the screen protector helps with its functionality.I believe most negative reviews come from people who either made mistakes during installation or were frustrated by the intricate process. It’s definitely not the easiest screen protector to install, but in the end, it’s absolutely worth it.While I understand people’s frustration with the installation, I truly believe this is one of the best screen protectors you can trust for your phone.If you want an easy screen protector install, this one isn’t it. But if you want a protector that will safeguard your phone, preserve its original functionality, and be nearly invisible, this is the one for you.

While the concept seems to be next level, The execution is trash... The instructions are frustratingly poor, I needed to watch several YouTube videos to see the necessary steps and placement of all the items, even then it was never made clear which side of the glass should be facing away from the phone or towards the phone (maybe it doesn't matter?). The item came with 3 total protector applications...The first attempt was a complete disaster as the adhesive only covered about 80% of the screen after following the directions and waiting over 10 minutes for the adhesive to disperse like the directions indicated it would (it didn't). Attempted to use the small weight that the kit came with to apply pressure to distribute the adhesive over the last 20% of the protectors but it did not help at all. Since it was covered in dried adhesive at this point, it was discarded and the second cover was used. After thoroughly cleaning the phone screen again and setting the phone up in the frame, The adhesive was again used according to the directions but came up short on covering the entire screen again. The second protector was then discarded and the third screen was employed. On the third attempt the amount of adhesive seemed adequate and the UV light was used according to the directions and seemed to work. After all was said and done there seem to be eight tiny pixel sized standoff (bumps) on the the corners and along the sides of the protector that, although very tiny, we're noticeable but not a deal breaker. (Still unsure to this day whether or not the cover should have been put on face down instead of face up or vice versa). I reset the thumbprint and adjusted sensitivity and all was working fine for approximately 3 days until a haze formed on the upper 20% of the screen. It was only noticeable when the screen was off. Again, not a deal breaker...The problem came approximately 2 days later when the screen started to lift off on both upper corners and along the left edge...After another 2 days it got so bad it needed to be peeled off and discarded...So, 40 to 50 bucks was wasted on two discarded protectors during instillation after following the directions closely and the third protector lasting about a week...Since I registered the item, I am eligible for a free replacement which also requires me to pay $10 for shipping! (So, it's free...Not free...).Why would I do that??? I am still searching for a decent screen protector. I don't care how much it costs, just want it to protect my screen and remain on the phone unnoticeable for a reasonable amount of time...