43 Dent Puller Kit - Adjustable Golden Dent Remover Tools, Paintless Dent Repair Kit Dent Lifter for Car Dent Repair Hail Dent Removal

Awesome concept for a license plate frame. Soft silicone protects car paint and completely stops any rattle. The frame very tightly/exactly fits the standard license and provides a nice perfect/subtle boarder. Very pleased with this purchase. It can be a bit tricky to get the silicone onto the plate because it's a tight fit (which is good). I recommend using a dull spoon edge to help when sliding the plate into the silicone to avoid accidentally damaging the silicone. A bit of patience is required to get it seated but once it's on, its definitely not popping out. The hole cutouts Line up perfectly make it easy to finish mounting the plate with frame to your car/truck. Highly recommended!

Unlike other reviewers, I found this to be a little challenging to install since it fits so tightly, as it should. The easiest way , for me, was to first insert the license plate into the bottom of the holder, then insert each side, and then the top, ending with the left upper corner. I used a flat screw driver to hold the last inch of the license plate holder out for that final corner to be inserted. Now that it's on my car though, I couldn't be more pleased. I got the grey color and think it looks so soft and understated. I mean, a license plate should not be attention drawing and with my new holder, it is not. In addition, besides the great look, is the fact that there is no more rattle when opening the trunk. I happily threw away my old plastic license plate holder, and my only regret is that I did not replace it with this one sooner!

Easy install, won’t damage car, well made. Exactly what I was looking for.

The dent puller is a actually a good, durable tool, especially for the money, don't expect this type of paintless dent repair tool to remove a dent perfectly on the first try glue dent repair (GDR), takes patience along with the use of a tap down tool, the one included in the kit is a good beginner to novice skill level tool. The glue gun and glue that come in the kit are the weak link, the gun is cheaply built and only takes the thin glue strips which are next to impossible to find in any store, do yourself a favor, buy a real glue gun along with some automotive grade glue before you start working on your project, it will save time...and your sanity.

Depending on the state you live in, the edges of your license may or may not be razor sharp. Mine were, so I wore gloves to protect my hands when installing this frame on the plate.This plate frame is great to prevent your paint from getting scratched up if you mount the plate with the top two bolts only. It also looks really nice.Not sure if this would help with trunk rattle if you had subs in the back, but I would assume it would.

There exist silicone license plate frames like this one. These are very thick and flexible. My license plate feels all snuggly and safe in this frame now. And my license plate does not make noise anymore! The holes almost did not align with my license plate's, but I was able to fix it as it is silicone. There is a light chemical smell to it, but it went away after a few days of leaving it out before putting it on my car. I have been using this frame for a while now and it still keeps its shape. There is no deformity whatsoever when it arrived and there are none now. I am truly amazed by how awesome this silicone frame is! This frame does catch a lot of dust outside that's flying around and the dust become dirt looking and dried up inside of the frame, but it isn't something that cannot be washed away. Wash it all away! What I like about this frame is that it does not block ANY part of my license plate like other frames do for no right reason. All the information is on there for the eye to see. I am definitely going to buy this again just because. I even recommend it to family and friends. Thank you.

This is my first time trying a silicone frame. The reason I am trying it is due to a rattle I get with every single plate I have. Usually I use double sided tape or try plastic frames plus tape. I accidentally saw this frame and figured I have nothing to lose. Definitely no rattle and and the plate is nice and snug. After I put in the screws I checked the edges and they maintained a nice straight edge. I thought maybe the torque of the screws would cause it to warp but the frame kept nice straight edges. The install instructions are on the bag and are very simple. Took about 5 minutes total to install. Also, I drove through the car wash and had no issue with excess water seeping from behind the the frame. It appears the silicone material has sealed enough not to allow water to be retained behind it. Overall I think I found my solution and plan to buy 2 more for the other cars.

Was looking for license plate frames to hold new license plates and to replace the dinky plastic dealer variety. Using a sturdy silicon sleeve seemed like an excellent idea. After mounting two of these Randalfy (also never heard of them before) frames, I still think so. Inserting the plates in the frames was rather easy. For the first plate, I used a nylon bicycle tire lever to help guide the lip of the fame over the plate. However, it turned out that the material has enough stretch to work the silicone lip over the plate by just massaging the material towards the edges of the plate with your fingers, and that is what I did for the second plate. Screws, or any other hardware, are not included, and I purchased some stainless steel screws separately. The frames look great on the car, and my guess is they'll last longer than the car itself, though this remains to be seen.