Criditpid 326628-762 Furnace Draft Inducer Motor Replacement for Carrier, Bryant, Payne Models, Furnace Blower Motor Exhaust Vent Venter Motor.

Directions were perfect. Truly plug and play!

It cannot be better than what they didI received the part at six am

My Bryant Furnace is about 20 years old and the inducer motor (326628-461) is dead. I could not find one with the same model number and instead I ordered this one. It arrives in just in two days with all parts in well packed. It contains wire adaptor which connects the old interface as well. Installation is easy. The only thing I have to adjust is the ground wire is a little short, I have to cut a piece from old unit and connected it to the new ground wire. In the first a few days it makes some noise. After a few days the noise was gone. So far after one month, it works well.

I ordered the induction fan assembly for my Carrier 80% furnace and got it in a few days. It was packaged nicely with lots of padding to protect everything. My old squirrel cage fan was out of balance and I didn’t realize it till I got it out and looked at it, it’s always had a vibration sound now I I know why, probably caused the motor to fail prematurely. The new one went right in but I did have to purchase a tube of high temp silicone to help hold the new gasket in place. Paid a couple hundred for everything and probably saved three or four hundred for a service call.

Came with adaptor for single-stage furnaces, nice thick gasket, a set of screws, and well-written instructions. Let's hope it lasts.

The furnace was fixed and the heating restored.

The package contained all the parts needed to fully replace the inducer motor assembly on a Bryant Furnace Model 312AAV036070AAJA. It's a tight squeeze, and I needed to temporarily unscrew another part of the furnace, but once aligned, it all went back together quickly and fired right up.

Went on like a dream: e careful how you put on fan blade may rub