--- product_id: 575940660 title: "Water Detector with Text Message and Email Notifications (AST01)" brand: "myspool" price: "€ 110.89" currency: EUR in_stock: true reviews_count: 5 category: "My Spool" url: https://www.desertcart.ie/products/575940660-water-detector-with-text-message-and-email-notifications-ast01 store_origin: IE region: Ireland --- # Water Detector with Text Message and Email Notifications (AST01) **Brand:** myspool **Price:** € 110.89 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** Water Detector with Text Message and Email Notifications (AST01) by myspool - **How much does it cost?** € 110.89 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.ie](https://www.desertcart.ie/products/575940660-water-detector-with-text-message-and-email-notifications-ast01) ## Best For - myspool enthusiasts ## Why This Product - Trusted myspool brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. Review: Reliable Messages for Rare Water-On-Floor Events - For me an AC-powered water sensor is better than battery powered ones. I use these on floors near water heaters, and alerts are not expected for long periods. I can set them up and forget them, even for years after a battery would typically die without my awareness. Setup was not difficult following the brief instruction guide, but there are a few things to note: There is no installable cell phone app. Such an app could simplify initial setup by automatically detecting the Wi-Fi network and password and simplify connecting to an account. But the guide completely shows the steps in doing this through your phone's Wi-Fi settings. After powering-up the device, you temporarily select the Wi-Fi network SASensor-0000000 on your phone, then manually identify your household network and password. You should do this quickly after powering up the device, so that no neighbor or passersby can hijack it. Should this happens, the product website, MySpool.com provides instructions on how to reset the device and start again. An app could eliminate this problem. Like almost every security device, you have to set up an account on the product's website. Here you can see recorded events from the sensor and set up additional options. After logging in using my phone, I was able to connect the new sensor to my account with the sensor's "0000000" number. When I set up a second sensor through the same phone, it was automatically connected to the account. Since there is no installed app, I bookmarked the website for easy future access. On the website, each sensor has separate notification settings. When you enter and save your email address for any sensor, you should immediately look in your inbox for an email titled "AWS Notification - Subscription Confirmation." Then click the "Confirm subscription" link in that message. You will not receive emails for sensor events until you confirm. I am very leery about AWS messages since they have no details about their purpose and are widely sent. The only thing that indicates you can safely respond is that you will receive the email within seconds of saving the email address in your MySpool account. You wiil have to do this for every sensor. The FAQs on the website cover this problem. If you missed the AWS confirmation email, you can just clear-save-reenter-save the email address again to trigger a new AWS email. The sensor settings also allow you to specify a phone number for messages, but there was no confirmation required. The sensor operates as I expected. Anytime the sensor goes from dry to wet, an email and text message are triggered immediately, with both notifications identifying the detection time and name of the sensor, which can be changed on the website. The email sender is "Alert-0000000". If the wet condition continues, "Optional Device Settings" in the app determine how frequently emails will be retriggered. By default re-emails are sent every 1 minute, but this period can be adjusted up to a max of 24 hours. I changed my settings to 1 hour. I did not see a way to turn off email messages without deleting the email message entirely. Text messages are sent to the phone every 5 minutes, and that period cannot be adjusted. Under "Optional Settings" text messages can be turned off. All email and text settings can be changed during a wet event, taking effect immediately. So if you are already aware of a condition but can't correct it right away, it's good to know you can turn these off. Remember to turn them back on after correcting the problem. Note that your web account shows the last 10 wet conditions for the sensor, repeated every 1 minute. I did not find a way to adjust this frequency. UPDATE: I unplugged one of the sensors, and I for two 24 hour cycles alerting me that the sensor is off-line. Good for MySpool. Only two emails, but that was good enough for me. All said, I think this sensor is a very good solution. I think a dedicated installable app would improve the product significantly. Although the operation is good as is, it would be helpful to be able to: - Auto-detect phone Wi-Fi settings on initial setup - Set a period for re-messaging. - Allow emails to be turned off. - Send a message or email when a wet-event ends. - Send a message or email when power fail occurs and ends. - Update: I also agree with other posts that it would be great to send messages to multiple phone numbers Review: Instructions confusing - here is how to configure it simply - Device works great, notifications are sent to my email and SMS. Here is how to configure it out of the box. 1. Go to MySpool.com and register for an account. An email will be sent to you, confirm it by clicking link 2. Dip the water sensor end into water for a couple second (that kicks off the device setup) 3. On computer or mobile, open WIFI and connect to the SASensor-####### (# denotes your device ID) 4. Open webbrowser such as Chrome, Edge on your computer or mobile and in the address bar, type 10.10.4.1 5. Configure you 2.4ghz WIFI, click SAVE. NOTE: it will test that wifi and if it doesn't accept it, you will continue to see a SASensor-###### in your WIFI SSID list. If it accepts your WIFI, that will disappear. 6. Log into your MySpool.com portal, click My Devices and you should see your device there now. 7. Click on Configure Device, enter your email addresses, phone number and also click Advanced Setting to change notification intervals Keep in mind, this unit requires your WIFI connection. The sensor device sends regular heartbeats back to the vendors servers with updates on water sensing alerts. If WIFI isn't working or if the device fails to call back at regular intervals, server marks missed heartbeats and will indicate it accordingly. For best practice, you may wish to have a UPS hooked up to this sensor and to your WIFI modem and router should your environment consider water monitoring a critical requirement (such as server rooms or basements where sump pumps are hooked up) Hope this helps. ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B07BS9Z255 | | Brand | MySpool | | Colour | Black | | Compatible Devices | Smartphone | | Control Method | App | | Country of Origin | USA | | Customer Reviews | 4.3 out of 5 stars 483 Reviews | | Item Dimensions L x W x H | 5.1L x 5.1W x 10.2H Centimeters | | Manufacturer | MySpool | | Mfr Part Number | WATER_001 | | Model Number | WATER_001 | | Power Source | Corded Electric | | Product Dimensions | 5.1L x 5.1W x 10.2H Centimeters | | Sensor Technology | Moisture Sensor | | UPC | 720260522356 | ## Product Details - **Colour:** Black - **Brand:** MySpool - **Power Source:** Corded Electric - **Compatible Devices:** Smartphone - **Product Dimensions:** 5.1L x 5.1W x 10.2H Centimeters ## Images ![Water Detector with Text Message and Email Notifications (AST01) - Image 1](https://m.media-amazon.com/images/I/61zxpgU65CL.jpg) ![Water Detector with Text Message and Email Notifications (AST01) - Image 2](https://m.media-amazon.com/images/I/71PXjlSmBFL.jpg) ![Water Detector with Text Message and Email Notifications (AST01) - Image 3](https://m.media-amazon.com/images/I/61sgAjPl-HL.jpg) ![Water Detector with Text Message and Email Notifications (AST01) - Image 4](https://m.media-amazon.com/images/I/51IEFU97AFL.jpg) ![Water Detector with Text Message and Email Notifications (AST01) - Image 5](https://m.media-amazon.com/images/I/613Vbf9MQVL.jpg) ## Questions & Answers **Q: As the lead from the sensor to the box is only 2 feet, can you mount the box to a stud or wall?** A: Yes you cam: use either duct or double sided tape. You may also want to look at the rugged version: it comes with a 5 foot lead which is rigidly connected to the sensor. It also comes in an enclosure which has screw mount holes. **Q: Installed the device, configured both text and email alerts. now i receive a text alert every 6:30 mins. but no email alerts at all. why is it so?** A: Look for an email with a subject "AWS Notification - Subscription Confirmation". You need to click on the link in that email to confirm your subscription to email notifications. If you cannot find it, go to Configure Device, remove and then add your email again. All email changes require subscription confirmations. **Q: Will this work on a 220v socket, or 110v only ??** A: It works on 110. **Q: What water level does it detect at?** A: I have recently purchased this item and spent a few days testing it. In my test I placed the sensor on a plate dinner plate which contained water and it triggered a response immediately. Based on this I would say this sensor appears to be triggered upon contact with even very low levels of water. ## Customer Reviews ### ⭐⭐⭐⭐⭐ Reliable Messages for Rare Water-On-Floor Events *by M***N on 16 May 2026* For me an AC-powered water sensor is better than battery powered ones. I use these on floors near water heaters, and alerts are not expected for long periods. I can set them up and forget them, even for years after a battery would typically die without my awareness. Setup was not difficult following the brief instruction guide, but there are a few things to note: There is no installable cell phone app. Such an app could simplify initial setup by automatically detecting the Wi-Fi network and password and simplify connecting to an account. But the guide completely shows the steps in doing this through your phone's Wi-Fi settings. After powering-up the device, you temporarily select the Wi-Fi network SASensor-0000000 on your phone, then manually identify your household network and password. You should do this quickly after powering up the device, so that no neighbor or passersby can hijack it. Should this happens, the product website, MySpool.com provides instructions on how to reset the device and start again. An app could eliminate this problem. Like almost every security device, you have to set up an account on the product's website. Here you can see recorded events from the sensor and set up additional options. After logging in using my phone, I was able to connect the new sensor to my account with the sensor's "0000000" number. When I set up a second sensor through the same phone, it was automatically connected to the account. Since there is no installed app, I bookmarked the website for easy future access. On the website, each sensor has separate notification settings. When you enter and save your email address for any sensor, you should immediately look in your inbox for an email titled "AWS Notification - Subscription Confirmation." Then click the "Confirm subscription" link in that message. You will not receive emails for sensor events until you confirm. I am very leery about AWS messages since they have no details about their purpose and are widely sent. The only thing that indicates you can safely respond is that you will receive the email within seconds of saving the email address in your MySpool account. You wiil have to do this for every sensor. The FAQs on the website cover this problem. If you missed the AWS confirmation email, you can just clear-save-reenter-save the email address again to trigger a new AWS email. The sensor settings also allow you to specify a phone number for messages, but there was no confirmation required. The sensor operates as I expected. Anytime the sensor goes from dry to wet, an email and text message are triggered immediately, with both notifications identifying the detection time and name of the sensor, which can be changed on the website. The email sender is "Alert-0000000". If the wet condition continues, "Optional Device Settings" in the app determine how frequently emails will be retriggered. By default re-emails are sent every 1 minute, but this period can be adjusted up to a max of 24 hours. I changed my settings to 1 hour. I did not see a way to turn off email messages without deleting the email message entirely. Text messages are sent to the phone every 5 minutes, and that period cannot be adjusted. Under "Optional Settings" text messages can be turned off. All email and text settings can be changed during a wet event, taking effect immediately. So if you are already aware of a condition but can't correct it right away, it's good to know you can turn these off. Remember to turn them back on after correcting the problem. Note that your web account shows the last 10 wet conditions for the sensor, repeated every 1 minute. I did not find a way to adjust this frequency. UPDATE: I unplugged one of the sensors, and I for two 24 hour cycles alerting me that the sensor is off-line. Good for MySpool. Only two emails, but that was good enough for me. All said, I think this sensor is a very good solution. I think a dedicated installable app would improve the product significantly. Although the operation is good as is, it would be helpful to be able to: - Auto-detect phone Wi-Fi settings on initial setup - Set a period for re-messaging. - Allow emails to be turned off. - Send a message or email when a wet-event ends. - Send a message or email when power fail occurs and ends. - Update: I also agree with other posts that it would be great to send messages to multiple phone numbers ### ⭐⭐⭐⭐⭐ Instructions confusing - here is how to configure it simply *by C***K on 25 January 2024* Device works great, notifications are sent to my email and SMS. Here is how to configure it out of the box. 1. Go to MySpool.com and register for an account. An email will be sent to you, confirm it by clicking link 2. Dip the water sensor end into water for a couple second (that kicks off the device setup) 3. On computer or mobile, open WIFI and connect to the SASensor-####### (# denotes your device ID) 4. Open webbrowser such as Chrome, Edge on your computer or mobile and in the address bar, type 10.10.4.1 5. Configure you 2.4ghz WIFI, click SAVE. NOTE: it will test that wifi and if it doesn't accept it, you will continue to see a SASensor-###### in your WIFI SSID list. If it accepts your WIFI, that will disappear. 6. Log into your MySpool.com portal, click My Devices and you should see your device there now. 7. Click on Configure Device, enter your email addresses, phone number and also click Advanced Setting to change notification intervals Keep in mind, this unit requires your WIFI connection. The sensor device sends regular heartbeats back to the vendors servers with updates on water sensing alerts. If WIFI isn't working or if the device fails to call back at regular intervals, server marks missed heartbeats and will indicate it accordingly. For best practice, you may wish to have a UPS hooked up to this sensor and to your WIFI modem and router should your environment consider water monitoring a critical requirement (such as server rooms or basements where sump pumps are hooked up) Hope this helps. ### ⭐⭐⭐⭐⭐ Excellent support, one of the best *by K***G on 3 August 2020* I had a little problem setting it up, due to the recent up grade to my phone and tablet, after tec support e mailed and set a time to call me , worked like a dream, I even set up my second one myself, and no battery to change, can unplug and plug back in and holds everything in memory , no fussing around, so you can move it from place to place on the same network. You could plug into a battery pack if there is no plug access. Excellent product ## Frequently Bought Together - MySpool Water Detector with Text Message and Email Notifications - Risinglink Smart Water Level Monitor, WiFi-Enabled, Text/Email Alerts, Indoor/Outdoor Detector, Battery Powered, Stainless Steel Float Sensor - PumpSpy Silent Check Valve - 1-1/2" with Buna-N Couplings, Model CV-150, Spring-Loaded Flapper, Sump Pump Life Expectancy Increase, Includes Steel Clamps Fit 1-1/2″ Pipe --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.ie/products/575940660-water-detector-with-text-message-and-email-notifications-ast01](https://www.desertcart.ie/products/575940660-water-detector-with-text-message-and-email-notifications-ast01) --- *Product available on Desertcart Ireland* *Store origin: IE* *Last updated: 2026-05-30*