Gooseneck Phone Holder Tablet Stand for Bed:[Swivel Base] Adjustable Flexible Lazy Arm with 2 Clips Phone Tablet Holder Mount Compatible iPad Pro Air Mini | Kindle | Switch or Other 4-12.9" Device

Husband bought this for me after I had cervical spine surgery. Since I would be recouping in bed for a few weeks.It’s not flimsy. It’s a solid piece. It will hold a phone or tablet. It does adjust up and down. And when your item is on place it also swivels.Performs as it should. Nothing really to assemble. It is stiff, but in a good way. You don’t want your tablet dropping on you. Anything heavier than an iPad is probably gonna make it droopy.

I bought this for my Kindle (2022 model, 11th gen... the newest basic model) hoping that the smaller attachment would work for it by pinching its sides, rather than its top and bottom. Why not just use the bigger attachment? Well I was concerned that it would cover the single button and charge port on the bottom of the kindle. And while it does do that, I can still plug in my kindle and tap the button through the holes in the plastic, or simply offset the attachment if my fingers were to ever get too fat for that. The small attachment won't work with the kindle at all (works great for phones), but the bigger attachment works fine with the kindle when clipped top-to-bottom (it is too wide to clip the Kindle side-to-side). So all said and done, my concerns were unfounded... if you have a kindle, there is only one way that it fits into this thing, but it does indeed fit, and will not hinder the regular operation of the device. The "clip" on the base where it attaches to your table is quite strong. It doesn't use springs like, say, a chip clip... instead you actually turn the sleeve just above the base, and it tightens the rubberized bite down onto your table using internal threads. The flexible neck is bordering on TOO sturdy. If you're attaching it to cheap/fragile furniture, it may be wise to adjust the neck while unattached to said furniture, so that you do not break off a chunk of your particle board table-top or whatever it may be. Elderly and children may not have the strength to uncoil it easily. This one was for my bedside table, but I'll also buy the identical model for my desk. It even works on card tables (the basic old-school ones with the metal pipe-style frame). It was bulkier than I expected, but I think I actually like that about it. Hope this review helps someone curious about just HOW compatible it is with Kindle (almost perfectly... no regrets).

One of the problems I’ve had is it not being “sturdy”. By that I mean when a dog jumps on/off the bed it shakes. not enough to stop me from telling you to get this item!It’s primary use is being attached to the headboard and used as a kindle holder for bedtime. (page turner bought separately) This is the best thing I’ve purchased for my reading at night!!

I'm not sure what I was expecting. I was hopeful that this protect could hold my iPad over my head while I lay in bed after injuring my neck. It is very adaptable for connecting to my headboard. The adjustable wire is thick... like thikkk. 👍Super capable of holding my iPad. The holder stretches from both ends and grips the device securely with soft grips. I'm impressed! Love it!

If you want to hook on the headboard and have an elevating mattress for your head or read with lots of pillows, the arm is not long enough and it puts the book very close to your face. Overall, this item holds the tablet/book steady and holds a variety of tablets/ereaders/phones. If you have a table next to you bed that it will hook to, it will work really well. It does sway at times but stops quickly if you rest your hand on it for a second.

Fir the money, this is very well built and great to use. My only suggestion is that the company switch to a bolt and lock clamping system as the torque required to have the current claw slip off, isn't as much as I would like.

I returned one of these because the neck wasn’t long enough and seen this one was much longer. It works amazing and comes with 2 different clamps to hold your phone or to hold bigger items like kindle, iPad, etc.

Works better with smaller devices such as phones and lightweight tablets (think kindle paperwhites). The gooseneck is strong and flexible, but sags with the weight of heavier tablets, and cannot support their weight at all if it's fully extended (loop the gooseneck at least once for some additional stability.)Vibration and wobble are a huge problem! ANY nearby movement causes the device to start bouncing (car passing by the house, someone walking nearby or going up and down the stairs, shifting position in bed or on the couch, etc.) This wobble/bounce is significant enough to be distracting and motion-sickness inducing.One plus side is that the clamp is very secure and can attach to almost any flat surface. The mount can hold devices up to 11 inches, but the heavier the device, the more unstable the gooseneck becomes.This item is great in theory, but just not strong enough to do what I need it to do, which is to support a Kindle Scribe, or Kindle Fire 10 so that I can read comfortably in bed. I purchased another similar device with a much better outcome! See my other reviews.

The media could not be loaded. As you can see from the video, the attachment to the drawer is quite large. Wasn't quite expecting that big, but good to know it's steady. It did take me a minute to figure out that you had to turn that thick piece to loosen and tighten as it didn't come with any instructions. Similarly the line to hold it up is also quite thick, nice for the weight. Holds my ereader quite well and would definitely fit something larger. It also has a secondary smaller holder attachment for a phone. Overall looks good to me!

Works great with my phone and kindle. Easy to use and stays steady.

This gooseneck holder is good. Just the word good. Its not exemplary, but it gets the job done. As other reviewers have mentioned, this does tend to shake. You won't find a holder that doesn't shake unless its a strong metal / aluminum arm that doesn't freely bend & twist like the material used in gooseneck holders. But the shaking is not that serious/big of a deal. I have this holder clamped onto my bed frame, so I can watch shows on my 12.9 inch iPad in bed. You'd think with all the moving in bed it'd be a bother but its not. A simple finger to hold the ipad from shaking for a second or two returns it back to normal.As for the material quality, I noticed reviews on here complaining about the neck breaking. I haven't experienced anything like that, and I think those reviewers unfortunately used the neck wrong. It is very strong & hard to move yes, but that does not mean it is able to withstand constant bending especially with sharp corner bends. The way I have the neck set up is in an 'S' shape to support the weight of the iPad while also being able to move forward/away from me in bed. The 'S' shape bend allows the weight to be distributed evenly which prevents the iPad from sagging overtime. The clamp for the iPad & iPhone are really strong, so be careful not to fight with it. Overall, I'd recommend this product for anyone who isn't after 100% perfection & just wants a job well done & (important) knows to handle this product too.

I love how strong this is and so stable and versatile however my kindle paperwhite only fits if I have my rubber hand grips on it otherwise the Kindle holder is too big and phone holder too small.

It worked very well when new. However, I used it overhead to read on my kobo reader - not a heavy device at all. It slowly lost its strength to hold it up, and eventually I was forced to brace it on my reading light, until today when it broke.I’d buy another, if I didn’t feel that 5 months is too short of a time frame, for this to lose all structural integrity.It should be noted this broke due to repeated twisting, as I moved it out of the way when I wasn’t using it. (I’ve also since found out my kids were playing with it as well, so who knows what they did when I wasn’t looking)**Edit - I assumed that I couldn’t discuss with the seller as it had been a while since I ordered, but they reached out, and offered me a new unit, which I really appreciate. Knowing how it is constructed, I will not be twisting it in the manner I was previously as I may have inadvertently weakened the unit.