Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

4.4/5
Product ID: 558547180
Secure Transaction

Details

  • Brand
    Dawnblade
  • Material
    Aluminium
  • Colour
    Black
  • Item Weight
    740 Grams
  • Compatible Devices
    Personal
📏1.75mm filament support
đź”§Easy assembly
⚙️All-metal structure

Description

🚀 Upgrade Your 3D Printing Game!

  • DURABLE DESIGN - Built to last with a robust all-metal construction.
  • ENHANCED PERFORMANCE - Lower torque requirements for efficient printing.
  • USER FRIENDLY ASSEMBLY - Comes with everything you need for a quick setup.
  • SMOOTH RELIABLE PRINTING - Experience seamless extrusion with reduced nozzle blockage.
  • VERSATILE FILAMENT COMPATIBILITY - Perfect for PLA, ABS, and flexible filaments like TPU.

The Creality Direct Drive Extruder Upgrade Kit is a comprehensive solution for enhancing your Ender-3 series 3D printer. This all-metal kit supports 1.75mm filament, including flexible options like TPU, and features a user-friendly assembly process with included tools and instructions. Designed for durability and efficiency, it minimizes nozzle blockages and maximizes printing versatility.

Large manufacture image 1Large manufacture image 2Large manufacture image 3

Specifications

BrandDawnblade
ManufacturerDawnblade
ModelDawnblade201122
Package Dimensions16.61 x 15.6 x 9.19 cm; 740 g
Item model numberDawnblade201122
Operating SystemWindows 10
Printing TechnologyFDM
Compatible DevicesPersonal Computer
Mounting Hardwaresteeper motor
Number of items1
Voltage24 Volts
Batteries IncludedNo
Batteries RequiredNo
MaterialAluminium
ManufacturerDawnblade
Country of OriginUSA
Item Weight740 g

Have a Question? See What Others Asked

What all metal hotends are plug and play with this?
will this work with the Anet et5x ?
I have an ender 3 pro upgraded to v2 with 4.2.7 board, v2 screen, and crtouch. do i have to upgrade to dual drive z axis to use this?
What decent all metal hotends are plug and play with this?

Reviews

4.4

All from verified purchases

B**T

Fantastic upgrade for Ender 3! No more clogged feed tubes!

Moderate level of difficulty, no instructions in the box, found a YouTube video by Lost in Tech that helped a lot!After install the prints were great and I'm no longer worried about clogged feed tubes!

S**X

Major pain to install in CR-10 but worth it.

I'm into building and flying FPV quadcopters and many of the add-on parts are 3d printed out of TPU (thermoplastic polyurethane). TPU can be difficult to print especially with a bowden tube extruder setup. So I ordered this unit to make printing in TPU easier. This unit was designed for the Ender printers but will work for the CR-10 printers but YOU MUST INSTALL A 12 VOLT HEATING CARTRIDGE IN THE HOT END FOR CR-10!!! This unit is shipped with a 24 volt heater for the Ender printers. This information is not clearly written in any of the literature so hopefully I can save you some head scratching. The install of this unit onto your gantry is easy but the WIRING INTO THE BOARD can be quite tedious especially on the CR-10. The pain in the baltz is worth it however as I was getting very nice TPU prints IMMEDIATELY. Bear in mind that you must change your print settings significantly from PLA to TPU but there are lots of YouTube vids etc for that. All in all this is an incredible setup, especially for around $30 usd.

K**R

Easy install, be sure to check bottom wheel bolt

Very easy install, especially if swapping existing extruder you can just swap all relevant wires. However I ran into headache trying to figure out why the extruder was getting blocked moving left on x axis, turns out whoever assembled put the bolt on wrong way so I had to disassemble and flip it as shown in picture.

G**A

excellent

excellent

J**S

Quick easy install for quality prints

Installed this on my Ender 3 after my original hot end died. For an extra $7 over the cost of a replacement hot end this was a no brainer. Took a few minutes to change the wiring but aside from that it went together pretty quickly. Unit came completely assembled and was easy to install with the aid of a video on youtube.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
€ 133.26

Duties & taxes incl.

Irelandstore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Creality Direct Drive Extruder Upgrade Kit For Ender 3 Ender | Desertcart Ireland