SM422 Turn Signal - Headlight - Fog Lamp - Dimmer - Hi/Low Beam - Multifunction Switch

This product was an easy swap from the multifunction switch that seemed to be malfunctioning. My turn signals worked about 1/2 the time.Once installed everything seemed to work just fine except the driver’s side fog light. That could be another problem because I did not inspect the fog lights before I changed out the switch. I’ll have to track that issue down - hopefully it’s not related to the new multifunction switch.The new multifunction switch feels good and solid with very good response for the turn signals and firm controls of the headlights, interior light dimmer, flashers and the fog lights.Considering how much this one piece of equipment controls, and how important those features are, it doesn’t make a lot of sense to go cheap on it and hope it works.It’s quite easy to replace if you have plenty of screwdrivers and hex/star drivers because you’ll need at least two sizes of each.

Have a 2006 Jeep TJ Sport. Cluster light dimmer suddenly quit working, so I went ahead and replaced the unit before any serious problems arose. Easy install, make sure you got a torx key set. Too about 20-30 minutes for install. It all works great at this time, but will add another entry if it does not hold up. Looks like OEM. B.

Make sure you unplug your flasher relay of your old one.And install on the new one.NOT in the instructions.

I installed this yesterday because my original fog light switch stopped working, so my fog lights would not turn off.This works as it should and it fits perfectly.When I was driving to work, there was a very brief "electrical burning smell" but it went away - probably the current heating up areas of the new plastic, or burning off the oil used in plastic molding - not sure.Also, the price was about 30% less than anything else I could find, and I looked for months.

Arrived with a broken hazard button. Otherwise install was easy and it functions well. Needed the to drive my jeep so i just superglued it on.

After a year and a few months the switch won't turn off the fog lights regardless of the position the light switch is in.I was initially satisfied with this thing. The plastic seems decent and the action was smooth. It looked similar or better than the OEM part.

Easy to install the whole switch comes out and it's 2 pices easy to separate and reinstall

Well it worked for just over a year. Let me set the scene, it's a crisp cold January Monday morning and I climb into my jeep to head to work at six in the morning. The sun is not quite up so lights will be required. I start the Jeep turn on the lights... turn on the lights... lights. No lights. Check the high beams work but no low. Great way to start a Monday. So now I have to drive to work with driving lights only, at least those still work. But the magic wasn't over yet as I drive away from my house I signal to change lanes because I try to be courteous driver, nope blinkers don't work either. So what am I telling you. DON'T BUY THIS PART IT SUCKS!Thank you and enjoy the rest of your day.