Thunder Hardware High Volume Low Pressure Gravity Feed Spray Gun, 20 oz

Great product , provides even coverage. We used General Finishes High performance top coat undiluted and it sprayed beautifully. We did have an issue after cleaning because the nozzle was not screwed tight. Once we reviewed the trouble shooting manual, it worked like a dream. It was much easier to clean than we expected. We applied two coats and the finish was evenly applied without issue. We highly recommend this HVLP spray gun. The small compressor was more than adequate to pressurize this product. Great product , provides even coverage. We used General Finishes High performance top coat undiluted and it sprayed beautifully. We did have an issue after cleaning because the nozzle was not screwed tight. Once we reviewed the trouble shooting manual, it worked like a dream. It was much easier to clean than we expected. We applied two coats and the finish was evenly applied without issue. We highly recommend this HVLP spray gun. The small compressor was more than adequate to pressurize this product. Make sure to clean all componants and tighten all nozzles and screws after cleaning. We have used other spray guns and found this one to be the easiest to handle, even more so than the gravity feed spray guns. We used 2 pressure valves , one to the compressor and one to the gun itself. We found 40 psi to be the perfect pressure for finish coat.

Worked fine for paining our fence, but we had to thin the paint. Our brand (Behr) said not to thin (we used water) so we expect it won't last as long as using it straight. But it took about 3 hours to paint a 16' section by hand versus 90' by sprayer. I don't like having to refill it so often but a bigger container would be too heavy. This was SO worth it compared to hiring the fence painting done.

Good paint flow, easy to use. It was simple to clean and store. I like this product and will use it for many projects

well it was a fairly easy fix but the fitting to the air was leaking right out of the box. I had to remove it from the sprayer clean it up reseal it and then put it back together and all was well. I plan on using it today so we shall see what the performance is like. 8/6/2018.

The paint gun was so user friendly. I painted with it. It did an amazing job. Very even distribution of paint, easy to use. It was easy for me to hold and use for a long period of time. Clean up was also a breeze. Make sure you get minerals when you buy your paint. Would recommend this gun for any at home projects.

Functional for a cheap sprayer, but after cleaning it the second time, the locking arm on the top slid up while I was cleaning the siphon tube, and it stuck on the nut connecting it to the top where the trigger connects. It would not dislodge and then after trying to push it down, the side of the locking arm broke. Used twice and now it’s broken!

Works well with Valspar cabinet paint. This is my first spray gun and still learning the in and outs of operation. Very easy to disassemble to clean. Sprays easy.

Quality is great. Very easy to clean and put away. Super user friendly, only a couple of nobs and you can immediately tell what each one does when you turn it. Beautiful even spray all throughout. I painted my bare metal axle housing for my jeep with Rust Stop Oil Based Enamel Black paint from ACE. Looks like the axle came out of the paint shop that way.