ANYCUBICWater Washable ABS-Like 3D Printer Resin, High Toughness and Durability, High Precision and Easy to Post-Process, Low Odor, Wide Compatibility for All LCD Resin 3D Printers(Grey V2, 1kg)

Bought now several of the anycubic water was resin clear and the grey and loving of using it. Also got one of the Water wash ABS like which I not used yet. Just remember to check the settings of the printer. Also very handy to wash them just under the water tap or in a small container and brush them off (under water). They clear seems to be as well very good with the epoxy resin colour inks to get the different colours. Well recommend for the money. Only down side is the smell of the resin but any resin has a slight smell to it

This stuff works great. My prints are a lot less brittle. There is next to no odor.It did take a few more calibration runs than the resin made for my printer. I won’t be going back. I love this stuff. I can’t get over how much cheaper this is than the regular 4K resin I was buying.

One of the best resins I have used. Decently priced and gives fantastic prints. Cleans as good as every other resin I have used.

Good quality resin, needs a good shake to stir up before pouring

After having problems with an entire batch of Elegoo water-washable I decided to try the AnyCubic ABS-like and it has become my favourite brand.It has good flexibility for thin parts and decent toughness on thicker ones which makes it a great all-rounder.Print times are great - much faster than the Elegoo resin - I can print normal layers at 2 seconds at 27 degrees.The white tends to look quite yellow or green immediately after curing but it settles into a very subtle blue-green white after a few days.

Have been using this stuff for a while, nice resin and produces the results I'm looking for.

really tough and strong. I really liked this compared to some of the other resins I was using. IPA or Bio Ethanol can clean this (using appropriate safety precautions), but it appears totally insoluble in water. The first part tried with factory recommended settings failed. I doubled the print layer cure time suggested for my printer from 2 seconds to 4 seconds and the prints all came out 100% (Black ABS like PRO2 resin) at 21 degC. shrinkage appears very low post cure. use in ventilated area and use gloves etc...

Resina di ottima qualita', molto resistente, precisa nella stampa a basso restringimento. Consigliata

Nutze es mit einem Elegoo Jupiter 6K. Erster Testdruck mit 2,8 Sekunden Belichtung war ein Voller erfolg. Härtet wunderbar und geruchsentwicklung ist auch sehr gering finde ich.Werde vorerst nur dieses Resin nutzen.

Love this resin. Print perfect every time no hassles. Low oder. It turns slight beige during curing. That doesn’t bother me because I paint all my models. I will continue using this rein for as long as it is available

Me decidí por la resina ABS de Anycuboc buscando una dureza y durabilidad extra en mis piezas.PROS:Resina rápida, rangos de 1.7 segundo en una impresora uniformation GK2Resistencia y larga durabilidad.CONTRASHay que tener cuidado al rellenar la bandeja de resina con resina nueva , parece que el cambio de temperatura afecta de forma drastica a la impresión de la pieza.Lo mismo ocurre cuando se hacen pausas para ver el estado de la impresión , esta deja una linea visible en la pieza impresa.Me esperaba algo más de dureza en las piezas impresas, hay que tener cuidado si exponemos las puiezas impresas una vez curadas , ya que con altas temperaturas, la pieza se vuelve blanda , una vez se enfría la pieza vuelve a su forma original.Si estás pensando usar esta resina para imprimir miniaturas, cuidado de tener las impresines en sitios con mucho calor, pordrían deformarse.CONCLUSIONES :En general creo que es una buena resina para uso de mecanizados y prototipos, pero en mi caso no la recomiendo para impresión de esculturas.Tiene bajo olor , eso es muy bueno si imprimes en interiores , pero no hay que olvidar que es imprescindible ventilar la habitación durante y después de la impresión.

Gerade für empfindliche Tabletopfiguren oder Bauteile, die leicht Biegespannungen übersich ergehen lassen müssen, ist das Materail sehr zu empfehlen. Mir sind öfter Teile mehrfach runtergefallen, wo anderes Resin sehr wahrscheinlich zersprungen wäre.Was mir ebenfalls aufgefallen ist, es haftet deutlich besser an der Druckplatte, was für größere Drucke mehr Sicherheit bringt.