---
product_id: 547052597
title: "EBB SB2209 CAN V1.0 Extruder Breakout Board for Voron Stealthburner UART Mode Support Klipper with 100K NTC B3950 + 30-Pin Ribbon Wire Kit"
brand: "bigtreetech"
price: "€ 51.31"
currency: EUR
in_stock: true
reviews_count: 3
category: "Bigtreetech"
url: https://www.desertcart.ie/products/547052597-ebb-sb2209-can-v1-0-extruder-breakout-board-for-voron
store_origin: IE
region: Ireland
---

# 64MHz STM32G0B1RET6 MCU Ultra-silent TMC2209 stepper driver Stable CAN Bus with 10A max current EBB SB2209 CAN V1.0 Extruder Breakout Board for Voron Stealthburner UART Mode Support Klipper with 100K NTC B3950 + 30-Pin Ribbon Wire Kit

**Brand:** bigtreetech
**Price:** € 51.31
**Availability:** ✅ In Stock

## Summary

> 🚀 Elevate your Voron stealthburner with silent power and seamless CAN connectivity!

## Quick Answers

- **What is this?** EBB SB2209 CAN V1.0 Extruder Breakout Board for Voron Stealthburner UART Mode Support Klipper with 100K NTC B3950 + 30-Pin Ribbon Wire Kit by bigtreetech
- **How much does it cost?** € 51.31 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.ie](https://www.desertcart.ie/products/547052597-ebb-sb2209-can-v1-0-extruder-breakout-board-for-voron)

## Best For

- bigtreetech enthusiasts

## Why This Product

- Trusted bigtreetech brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Klipper-Ready Vibes:** Built-in ADXL345 accelerometer and SPI interface enable advanced resonance compensation for smoother, high-quality prints.
- • **Plug & Play CAN Bus:** Simplify your setup with a dedicated 3m CAN Bus wire and XT30 interface supporting up to 10A current for safer, stable connections.
- • **Precision Powerhouse:** Harness the 64MHz ARM Cortex-M0+ MCU for rock-solid CAN bus stability and lightning-fast data transmission.
- • **Smart Thermal Management:** Onboard temperature sensors and Max31865 support PT100/PT1000 probes for precise thermal monitoring up to 500°C—keep your extruder cool and reliable.
- • **Whisper-Quiet Performance:** Experience ultra-silent motor control with the integrated TMC2209 driver—no more annoying stepper noise disrupting your workflow.

## Overview

The BIGTREETECH EBB SB2209 CAN V1.0 is a high-performance extruder breakout board designed specifically for Voron Stealthburner setups. Featuring a 64MHz STM32G0B1RET6 MCU, ultra-quiet TMC2209 stepper drivers, and a robust CAN Bus interface supporting up to 10A, it ensures stable, long-distance data transmission and safer operation. With onboard temperature sensors, PT100/PT1000 support, and an ADXL345 accelerometer for Klipper resonance compensation, this board delivers precision, reliability, and a streamlined installation experience for advanced 3D printing enthusiasts.

## Description

Why do Voron users choose BIGTREETECH EBB SB2209/SB2240 1. Perfect fit for the installation position of VORON StealthBurner 2. The debugging position and installation direction of the ADXL345 accelerometer are consistent 3. Fan voltage 5V 12V 24V can be selected, supporting 4-wire fans to meet more DIY requirements 4. The new XT30 model CAN bus is more stable and convenient BIGTREETECH EBB SB2209 CAN Built-in Driver: TMC2209 Driver Working Mode: UART MCU: Arm 32-bit Cortex-M0+ CPU STM32G0B1CBT6 64MHz Input Voltage: DC12V-DC24V 9A Logic Voltage: DC 3.3V Heater Connection: Heater Cartridge (E0), Max Output Current: 5A Onboard Sensor: ADXL345 Fan Port: 2 x PWM (FAN0, FAN1), 1 x 4 pins Fan Port Fan Port Max Current: 1A Continuous, 1.5A Instantaneous Stepper Motor Interface: EM Temperature Sensor Interface: 1 x 100K NTC or PT1000(TH0), 1 x PT100/PT1000 Selectable USB Communication Interface: USB-Type-C DCDC 5V Output Max Current: 1A Expansion Port: EndStop, ABL, RGB, PT100/PT1000, USB, CAN, SPI

Review: Quality hotend interface canbus - Quality can hotend interface
Review: This has been a very stable and easy to use board. - I use this board on a stealth burner for a Voron 2.4. As long as you follow instructions and are careful with the fan board (Make sure not to let it short against either the fan or the extruder fasteners in the stealth burner these are great boards. The fan board is in a very tight space, and you need to make sure that if the fan has mylar stickers you insulate it appropriately. I used some black electrical tape and some Kapton tape to make sure it doesn't have a problem. Also check the back of the board and make sure any soldered leads are not too long or sharp. If need be trim and file very carefully. When putting the front on the stealth burner make sure the pins correctly aligned. Look up Esoterical's guide and it will go pretty easy (This is painful experience speaking). It really beats running all those constantly breaking wires through the drag chains. I also used the separate can bus interface board. If you have problems, check for shorts. They are insidious.

## Features

- Adopting the leading STM high-performance 32-bit 64MHz STM32G0B1RET6 main control chip, it ensures the stability of CAN bus signals and can achieve long-distance high-speed data transmission, bidding farewell to cumbersome cable management from now on
- The EBB SB2209 is equipped with TMC2209 driver chip and a ultra silent stepper driver, making it the most cost-effective choice for motors that are not prone to stepping out. It has functions such as overheating protection, stall protection, and preventing motor vibration
- The CAN Bus of XT30 communication interface supports a maximum current of 10A, making it safer to use; The interface is more stable when plugged in and out, reducing the shaking caused by extrusion movement; Equipped with a dedicated 3m CAN Bus wire, it is easy to use and eliminates the need for crimping terminals and other steps
- The onboard ADXL345 accelerometer and reserved SPI interface facilitate the activation of Klipper resonance compensation function; The SPI interface can be externally connected to the ADXL345 accelerometer module, with flexible installation positions to meet more DIY usage scenarios
- On board temperature sensor, monitoring tool board MCU stability, extrusion head cavity temperature, more reliable to use; On board Max31865, with paddle switch selection, supports 2 or 4 wire PT100 PT1000 (more accurate data, maximum temperature measurement value of 500 ℃, NTC maximum temperature measurement value of 150 ℃)

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0C42TBZ3L |
| Best Sellers Rank | #242,955 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #4,387 in 3D Printer Accessories |
| Date First Available | May 2, 2023 |
| Item Weight | 7.8 ounces |
| Manufacturer | BIGTREETECH |
| Package Dimensions | 6.54 x 4.84 x 2.05 inches |

## Product Details

- **Brand:** BIGTREETECH
- **Color:** Black
- **Item Weight:** 0.22 Kilograms
- **Material:** PCB
- **Operating Temperature:** 150 Degrees Celsius

## Images

![EBB SB2209 CAN V1.0 Extruder Breakout Board for Voron Stealthburner UART Mode Support Klipper with 100K NTC B3950 + 30-Pin Ribbon Wire Kit - Image 1](https://m.media-amazon.com/images/I/714TTn62VeL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐⭐ Quality hotend interface canbus
*by J***I on September 12, 2025*

Quality can hotend interface

### ⭐⭐⭐⭐⭐ This has been a very stable and easy to use board.
*by M***N on August 12, 2024*

I use this board on a stealth burner for a Voron 2.4. As long as you follow instructions and are careful with the fan board (Make sure not to let it short against either the fan or the extruder fasteners in the stealth burner these are great boards. The fan board is in a very tight space, and you need to make sure that if the fan has mylar stickers you insulate it appropriately. I used some black electrical tape and some Kapton tape to make sure it doesn't have a problem. Also check the back of the board and make sure any soldered leads are not too long or sharp. If need be trim and file very carefully. When putting the front on the stealth burner make sure the pins correctly aligned. Look up Esoterical's guide and it will go pretty easy (This is painful experience speaking). It really beats running all those constantly breaking wires through the drag chains. I also used the separate can bus interface board. If you have problems, check for shorts. They are insidious.

### ⭐⭐⭐⭐⭐ It does the job - wiring in my Voron is massively reduced.
*by F***N on March 1, 2024*

Now I only have to worry about 4 wires breaking from repetitive stress instead of 20! Software/firmare was a challenge to set up (fortunately there are lots of guides online and in videos), but seems rock-solid once you do. I do have the same complaint many do - the tiny connectors on the PCB are so small they are both a pain and a potential point of failure. For the 2-wire thermistor connector, I soldered wires to it and put a microfit connector on the other end. More reliable and MUCH easier to access when I want to change printheads.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.ie/products/547052597-ebb-sb2209-can-v1-0-extruder-breakout-board-for-voron](https://www.desertcart.ie/products/547052597-ebb-sb2209-can-v1-0-extruder-breakout-board-for-voron)

---

*Product available on Desertcart Ireland*
*Store origin: IE*
*Last updated: 2026-01-24*