Ultrasonic Anti Barking Device, Dog Barking Control Devices with 3 Adjustable Level, No Barking Deterrent & Dog Training Tool, Safe for Human & Dogs with 3 Levels Stop Dog Barking Deterrent

This was the only part missing from the rollator that I received from my mothers' estate.

I am an electrical/controls/automation engineer for more than 25 years. I have a log cabin in the East Tennessee mountains that is 3 hours away that I rent out on VRBO. The cabin has an .5 acre pond that requires constant monitoring and control. I wanted to be able to control the pond aerator (120VAC 15 amps), the electric well pump (7.5 amps 240VAC), the DC Power Supplies for the solar well pump, and stop the solar well pump on high water conditions. This unit met my needs and then some. Each relay on the unit has NO (normally open) and NC (normally closed) contacts. I use a camera to monitor the pond level and activity as verification. I built a custom enclosure and wired the relays to 30amp contractors. My first test I actually ran the pond aerator right off the unit and it worked, I was really surprised, I thought it would have burned up with a 15.88 amp load. The unit has a programmable timer for all 4 channels, so I set a schedule for the pond aerator and night time pumping and it works like a champ and I didn't need to buy a $100 timer. Setup: Forget about moving the dip switches for set up like the instructions tell you. Just press and hold the R1 button for 5 seconds until the wifi light blinks then connect it up in the app. IT WILL NOT CONNECT 5GHz. I had to turn off 5GHz and make two different wifi networks like Black Bear Cabin 5G and Black Bear Cabin 2G. If you are not an IT type of person this might be cumbersome for you. A more simple method is to buy a 2.4GHz wifi extender and teach the unit to the extender, then you won't have to fool around with your router settings. I will definitely buy more of these units! They are awesome for the price and what they do, and without the cost of an expensive plc based system. My only hope is that they will come out with a 6 or 8 channel version and that the units would have feedbacks (inputs) and a real 1000Mbps wired ethernet port. In two weeks the entire well house and this unit will be running off the pure sunshine.

I bought this to use as a motor forward/backward control for a screwdriver antenna. There are four SPDT contacts, and I have them wired to apply voltage in one (and only one) polarity at a time to the antenna motor..The difficulty was that the eWelink app only operates for setup of the unit at 2.4GHz. For setup, I renamed the router 5GHz channel to a random name, and my cellfone would then connect at 2.4GHz using the app. It took several tries with the app to get the switching unit recognized.With setup complete, I changed the 5GHz router signal back to the original name (which matches the 2.4GHz channel) and all works fine.I find the app to be a bit difficult to learn, but with all running it has been pretty reliable.There are four buttons on the app screen to actuate the 4 individual relays. The buttons can be user named, and the user can decide if the relays will be switched on/off with two different button actions, or will be momentarily switched on/off with a single button press. The momentary actions can be set at a minimum of 0.5 seconds or more.There are two power supply connectors and the user must select and wire one of them to a power source. There is a DC connector, or alternatively it can be connected to the AC power connections.In summary, there is a lot of capability for the money and it is working well.********** update after using it a bit*************The unit has 4 relays. As long as it is near my router everything is fine. However, when I move the unit to its intended location (30 feet from the router) relay number 1 is very unpredictable. It turns on without instructions from the app to do so. I'm currently not using relay 1. The others work fine. I may buy another unit and see if it works properly with a weaker signal.

I just finished putting this bag on my mom’s Drive rollator. It is very well made, much better than the cheap, vinyl bag that came with her rollator. It was very easy to install. All I needed was a Phillips screwdriver to loosen the clamps securing the seat to the rollator so that I could slip the straps of the bag around the frame in the back. I didn’t have to do anything to the front straps, other than wrap them around the frame and secure them with the snaps. The bag is roomy enough to fit my moms pocketbook and the canvas appears to be quite durable! She is so excited to have something large enough to fit her pocketbook, plus some extras. The four interior pockets make it easy to stay organized and easy to find small items placed inside the bag. Although this bag does not come with a strap to collapse the rollator, my mom’s rollator already came with a strap. We just left it on and maneuvered the strap around the bag so that the rollator can be easily collapsed just like before. My mom and I highly recommend this product!

This charger is not made by Panasonic, but will charge a Panasonic Arc 5 shaver. The adapter is a TEVSINPO AC Adapter model X002F9OUV5.I purchased this adapter when I forgot to pack my Panasonic adapter on a trip. Amazon delivered in 24 hours. This adapter is much lighter than a Panasonic and has a very thin cord. With that said, it does work and let me continue shaving while on vacation.This adapter will most likely work for a while, but you will need to be more careful when disconnecting the shaver to avoid damaging the wire.