Vertical Heat Pressing Machine,Heat Set Insert Tool,Brass Inserts 3D Printing,Heat Set Insert tip for Thread Knurled Nut M2/M3/M4/M5/M6(1/4)/M8

Works wonderfully, assembly was a little confusing. The steps are listed on the store page and come printed in the box, take note that they look like 1,2,3 6,5,4 This threw me a bit. It also came with an extra M5/Tnut which I was confused on what step I missed. Otherwise, this seems like a well machined piece of equipment, and I believe it'll last a long time. The included iron heats up incredibly quickly and has temperature control that my other soldering irons don't - helps to create as little smoke as possible. It's super easy to get straight presses now, in a consistent manner. I was able to press several in a row without tons of re-heat time in between. It's light, but also has some weight which makes pressing a breeze. It comes with the tools you need to assemble as well, so it's a full kit. The best part is that it also includes the heat insert tips! If I had realized, I could've saved some money on a different set I bought. However, the tips I bought fit this iron as well, so I'm not out anything. Finally, it came with a plastic cap piece that's not in the instructions; it goes on top of the vertical tower to cover the exposed aluminum and give it a finished look. Great price, great tool. Would definitely recommend and would buy again if needed.

This vertical heat‑set insert tool has been a solid addition to my 3D‑printing setup. It heats quickly, holds temperature well, and makes it easy to install threaded inserts into PLA and PETG without warping the part. The vertical alignment helps a lot — inserts go in straight and seat evenly, which is a noticeable improvement over using a handheld soldering iron. The build feels sturdy and the motion is controlled enough to get consistent results. It does take up more space than a simple iron, but the accuracy you get in return is worth it if you do functional prints. After using it across several projects, the inserts have held tight and the tool has stayed reliable. If you want cleaner, more precise insert installation, this is a very dependable option.

This does a great job of setting heat-set inserts into our 3D prints. Overall assembly was straight forward. It is not as rigid as I would prefer but that said, it is rigid enough. There is a slight deflection has you push down, causing a very slight loss of perpendicularity. It is not enough to cause a bad insertion, but I would have preferred it to remain square. Understand that for the money, this is still more than worth the cost. The iron works great and heats up quickly. This is a great addition to your 3D printing setup if you are making functional parts that require real metal threads.

I was blown away by the quality of this 3DZWMAN Vertical Heat Pressing Machine! The build feels solid and durable, and it performs with precision every time. I’ve used it for a variety of brass inserts (M2 through M8), and the heat set process is smooth and consistent across the board. You definitely get more than your money’s worth with this set — it includes everything you need and then some. The range of tips and inserts makes it super versatile for different 3D printing projects. Setup was simple, and it heats quickly without overheating. If you do any amount of 3D printing and want clean, reliable threaded inserts, this is a must-have tool. Highly recommend!

Works pretty well. But I got the one with 210mm capacity and often enough that is not enough for me. If I had gotten the 400mm one it would be harder to stow away. Will print an offset adapter that raises the iron so that the tip is a bit higher and that will keep the smaller size and give me more range. Overall good product

I'm actually pretty good about installing heat inserts by hand, but I had a project where I needed to install over 50 - 4mm inserts at the same time, and I decided to see if this would cut the my labor down, and just make it less tedious. This heat press machine actually saved me a lot of time, and fatigue while completing, I actually had some fun doing it, instead of kind of dreading it. Assembly wasn't too difficult, it was easier than say, putting together some of that DYI furniture. With the included digital iron, you can set the temp precisely, and it holds that temp quite well. Being able to set the depth with a stopper means your inserts are going to be way more consistent than you can do by hand!! I like that I can just leave my main sized tip on the included iron, where I then have my previous iron available to use for quick one-offs that I need to install by hand. The vertical rail action is pretty smooth, but you kind of need to find the "sweet-spot" on where you push down on the bar, else it can bind up, but that only took a few seconds of testing before I put a part in to figure out. The different sized tips are also included & can be unscrewed and changed out without removing the soldiering iron, but since they are super hot, you'll have to wait for them to cool down before you can do so. That fact alone means that if you are doing 5 inserts of 5 different sizes, it will be a lot quicker to do them by hand. Where 5 of the same size, this is where it really shines! Note: the soldiering iron can easily be removed and used by hand also, so if you don't already have one, this is versatile enough to use it either way! Win-Win! I can say I highly recommend this for any project where you need to do multiple, consistent inserts. Once you have put it together, you can pull it out and be knocking them out within minutes.

The rig is easy to set up. Works well. Cool ability to add threaded inserts to 3D printed parts. Price point is very reasonable.

Easy to assemble and worked great. Just wish the stop had a easier way to adjust

高さが280ミリの表記はありますが、スプリングの長さ分、加工出来る物の高さに注意が必要でした。高さ90ミリ程が加工高さの限界です。スプリングの全長を短い物に交換するか、10ミリ幅の輪ゴムに変更し長さ調整すれば、高さ130ミリくらいまで加工出来そうです。デジタルハンダごては、設定温度に素早く上がるため大変便利です。耐久性が心配です。製品本体は精度も良く組み立ても簡単でした。

Einwandfreies Produkt, funktioniert hervorragend, super geeignet für die Verschmelzung zwischen Gewindehülse und dem gedruckten Teil.

Nos gusto mucho su funcionamiento facil y preciso, para colocar insertos, nosostros colocamos al rededor de 300 insertos en una tarde, habia veces que quedaban chuecos, con esta herramienta, hacemos que todos queden derechos, terminamos comprando 2 herramientas de estas. A parte estan robustas.

As not been used yet. It will soon. Firts look, fine thing. Son happy. Hopefully, it will work great fornits purpose.

Que c'est pratique !! Un bon moyen de mettre des inserts proprement ! Le mieux est de s'entraîner un peu avant.