Aairhut 4 Pack 13 W/m.K Thermal Pads, 100 x 100 mm x [0.5 mm+1 mm+1.5 mm+2 mm] Silicone Cooling Pad Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop PS4

Nice assortment of thermal pad thicknesses. I don’t know when I’ll need them again as I only needed a little to replace the pads in a Nintendo GameCube but they’re priced good for what you get.

These pads work. I can't give Technical report or specs but I used this pad material in my Dell M15-r4 Alienawre laptop to completely replace all the old material and fans. The laptop works fine with lots of heat coming from fans. The material is easy enough to handle just use gently and be patient. Lots of small spots in the M15 Multiple thickness was perfect. Did not use 2mm.

I used these on a used AMD RX 6600 XT that was having heat issues. Replaced the thermal paste and used these pads on the VRAM chips. All GPU temperatures dropped several degrees and card seems to be working fine. These pads are at least as good quality as what was on the card (which I presume was there from the factory) and since you cut them to fit you can't go wrong there. Just make sure you check online to see what thickness of pads your card needs. Mine needed two different sizes for chips on opposite sides of the card. How easy they'll be to install depends on your GPU. Most aren't so bad if you aren't afraid of just taking them apart, but some can be tricky with hidden screws, etc.

When you need just enough to fit your project, this is perfect. Easy to cut. Simple to use. What more could you ask for? I wanted to add some thermal pads to my laptops SSD & RAM. As well as a few other chips just to make it run a little cooler. This is exactly what I was looking for, simple & cheap...but not too cheap. Cutting the fit is as simple as a razon blade and you're done. If you cut it gently and with a sharp blade make sure to NOT cut too deep through the back plastic and its a breeze to peel n stick. There's not much to the packaging and no instructions, but then again, if you're ordering this you might just know what you're doing & why you bought it in the first place 😉. All the dimensions are spot on so finding the size you need should not be a problem.

Brilliant. good variety of thickness and works as good if not better than thermal paste.

These work if you need the exact size. These are not payable whatsoever.

This worked great to replace some deteriorating heat sinks in a GPU I had. It brought the temps down from near overheat levels to really good run levels.

Bought these for a couple of NVMe SSD heat sink applications, and a RX 6750 XT re-pasting/re-thermal pad application. They work very well, and have fantastic temps. You get four thicknesses, medium softness, and enough for multiple jobs. Hard to says how well these match up against Gelid thermal pads or Arctic thermal pads. AT WORST, there might be one degree difference between them, but for the amount you get and how well they perform, these are perfect for me. In all honesty, given how the supply system works, there is a extremely high probability that these are from the exact same factory as the more expensive brands, but just minus the higher end retail packaging.

ZEER HANDIG

great stays cooler easy to apply on cpu or gpu which if you don't know GPU is video card and CPU pc core processor. BETTER THEN PASTE I THINK BEAUSE ITS EASIER TO APPLY. THE HEAT SINK IS COOLER AS WELL. CLEANER AND EFFECTIVE FOR GAMING COMPUTERS.

Replaced old thermal pads on my Video Cards Vram Ect... definitely is keeping the cards vram cooler 😎

Producto de muy alta calidad. Lo he usado en una GTX1080 y realmente he conseguido bajar las temperaturas que actualmente registraba en la VGA. Lo recomiendo encarecidamente. Por contra es si precio pero lo bueno suele costar caro pero a favor conseguimos mejores prestaciones en nuestros componentes electrónicos.

Muy buen producto, considero seguir comprando pads de esta marca ya que mantiene frías las memorias vram de la tarjeta de video, muy buena calidad y buen precio.