4 Pack 13W/m.K Thermal Pads, 100 x 100mm 0.5mm+1mm+1.5mm+2mm Silicone Cooling Pad Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop PS4

I used these on a used AMD RX 6600 XT that was having heat issues. Replaced the thermal paste and used these pads on the VRAM chips. All GPU temperatures dropped several degrees and card seems to be working fine. These pads are at least as good quality as what was on the card (which I presume was there from the factory) and since you cut them to fit you can't go wrong there. Just make sure you check online to see what thickness of pads your card needs. Mine needed two different sizes for chips on opposite sides of the card. How easy they'll be to install depends on your GPU. Most aren't so bad if you aren't afraid of just taking them apart, but some can be tricky with hidden screws, etc.

seems to keep gpu temps in check after converting a AIO card back to air cooler. Plenty of material to cover all the vrms, chokes and memory.

As good as the best gelid but much softer and easier to work with. The price to performance cannot be beat with these. Good enough for a 4090s, VRMs & VRAM chips with zero throttling and vram temps sub 80C(@450W). These pads + ptm7950 and your gpu is good to go.

Used to attach water cooler to 3080. Adhesive not ideal but otherwise pretty good

Changed out the thermal pads on a 7900 xtx, these did the trick, memory temperatures dropped 10c... Make sure to use the right thickness. Mine is the Sapphire Pulse model and it uses the 2mm size all the way around.

When you need just enough to fit your project, this is perfect.Easy to cut. Simple to use. What more could you ask for?I wanted to add some thermal pads to my laptops SSD & RAM. As well as a few other chips just to make it run a little cooler. This is exactly what I was looking for, simple & cheap...but not too cheap. Cutting the fit is as simple as a razon blade and you're done. If you cut it gently and with a sharp blade make sure to NOT cut too deep through the back plastic and its a breeze to peel n stick.There's not much to the packaging and no instructions, but then again, if you're ordering this you might just know what you're doing & why you bought it in the first place 😉.All the dimensions are spot on so finding the size you need should not be a problem.

it does the job. I like the different sizes it has.

Normally I wouldn't attempt to take apart my video card, but after the recent heat spikes and the cost of a new video card I decided to at least TRY and repair mine. These pads, along with some GOOD thermal grease, made my repair much easier and worked great. Initially I bought cheaper pads with less thermal conductivity and it didn't help my issue. I would buy these again if needed. Nice pads, work well