12VHPWR 16 Pin to 3x8 Pin GPU Power Cable

I really dislike Nvidia's holdover triple splitter PCIE cable idea for using these 40 series GPU's without a PCIE5 PSU. This was perfect for my build and it works suprisingly well. I was a bit concerned before trying it as I did not want to damage a brand new 4080 FE. But I trusted the reviews here and it turns out I had nothing to worry about at all. Great product, just wish it had a few more cable combs. But that really isnt worth removing a star, most of the cable is hidden in the PSU shroud.

The 40 series GPU’s have a particularly poor adapter that is provided, they are unsightly and could potentially cause issues. This PCI-E 5.0 cable connects directly into the PSU, removing all risk associated with joints. Not only is it aesthetically pleasing, it is simply safer. Couple of point to watch out for: 1. Get the lead that connects into the PSU and not the 30cm extension. 2. Ensure you choose the right cable that is compatible with your PSU. 3. This cable is 70cm and will be long enough to reach your GPU in most places. Highly recommended all.

My 4090 GPU was not working with the default cables, due to lack of power. While not listed in the product page, it also fits the pin layout of Gigabyte PSU sockets. Mine is a P850GM. Without having to upgrade the entire PSU to ATX 3.0 standard that has the single 12vhprw connector on it, this did the job and cleaned up all the cable mess that comes with the 3 PCIE cable adapter shipped with the GPU and resolves the problem of some cables just not working at all. Plenty of length in a large case so that the connection to the card is not under stress by bending. The split to three PCIE cables happens far enough down the cable so that it is hidden at the back of the case and not in the way of other cables.

Great cable! Looks so much better than what Nvidia supplies. It's easy to install, decent quality, and powers my RTX5090 Founders Edition perfectly. The only thing with mine is I was not supplied the 4 transparent cable comb acrylic clips in the box (they were missing), so that's why I've given 4/5 stars.

I bought this cable last year as soon as it was available as I wanted to have a better solution than the 4 to 1 adapter provided by Asus with my 4090 TUF OC. I had tested the original adapter at 600W with no issues and this handles it with ease as well. To get to that power level I had to set 133% power limit and ran Furmark at 4K and 8xAA with post processing turned on. The connector didn't exceed the PCB temperature although that was a little warm because of the VRMs. I've run this for well over 6 months now at 'normal' power levels (300 max - 450W max) with no problems at all. From my experience, this is a great cable to tidy up the cabling and even now I would pick this one over Corsair or Cablemod.

I have been experiencing black screen crashes with fans running at 100%, like other reviewers I suspect it is this cable that is causing them, the cable itself is not melted and looks fine but my problems completely disappeared when I switched to the cable that came with my 4080. It’s a shame, the default one looks so ugly and this one looks premium.

This cable works great for the 4070 ti despite having 3 pcie connections for the psu. You can either plug 2 or 3 into your psu, it doesn't make any difference. I stress tested with only 2 plugged in and got full TDP 110% 315w and also the same for 3 connections plugged in. The design is much better than the standard shorter cable splitter that comes with the 4070 ti and looks so much better and doesn't take up nearly as much space. Really happy with the purchase.

Did'nt work with my Bequiet 1000w PSU as it had only 2 connectors for the 3 cable plugs. But I kept it for a future upgrade.

Work fine for my Rtx 5080.

Den fungerar bra ....slipper alla fula extra kablar.

タイトル通り、2本しかセンスピンが無く損傷の可能性が高いケーブルしか出回っていない中 本商品はキチンと4本存在し、H++の刻印も見にくいですが確認できました つまりこれは12v2x6ケーブルである事を意味し 旧規格の産業廃棄物である12VHPWRケーブルとか言う粗悪品より幾許か安全であることを意味します。 PCIe5.0ではなく、PCie5.1対応品なのでATX3.1電源でより安全に機能すると思われます。 謳い文句通りAWG16仕様でこちらも併せて安全性を向上させて居るように感じますし 思った以上に柔軟性がある事に加え、形状保持力(湾曲時にある程度形状を保ってくれる) もこのタイプのケーブルの中では高いので Sapphire RX9070(XT) Nitro+でケーブルを隠す際に適任なケーブルだと言えます。 ケーブルコームの取り付けは面倒でしたが、硬い素材で ケーブルへの形状の強制力と把握力が強い為コネクタ直下の急な曲げや 水平方向への折り曲げ等を事前に防ぐ事が容易でとても良いです。 ToughPower GTと上記GPUの組み合わせで使用中。850wのATX3.1です。 怖かったのですがキチンと差し込まなかった場合のテストも行いました。 結果、メモリートレーニング中に電源から「カチン」と聞こえ 起動はする物の、BIOSポストまで行きませんでした。 本来であれば起動すらしないはずですが、俺のマザーボードにはマザーボード自体にPCIe8ピン接続口があり そこへケーブルを指しているので、恐らくそこから電力を引っ張って起動しようとしてはいるものの 12v2x6からの供給が無いためポストしないと言う結果を生み出しただけだと思われます。 通常、誤った接続方式を取るとマザーボード自体へ電力が一切、あるいはほぼ渡されないので起動しないはずです。 結論:とても良い買い物でした。 安易に買い、使用する事が 特 に 好ましくないケーブルな為 16AWGでかつ12v2x6、センスピン4本全完備のケーブルを購入しようとしている方は 他社製の物も含め詳細な調査の上、適した製品が見つからなかった場合はこちらの製品の検討をお薦め致します。

Excelente qualidade. Serviu perfeitamente na conexão da fonte Seasonic 1600 Prime com a Placa ASUS RTX 3080TI.

Excelente producto, de muy buena calidad y muy flexible así como resistente. Yo lo uso con una fuente de poder Cooler Master MWE Gold 850 V2 Full Modular y una tarjeta gráfica RX 9070 XT Sapphire nitro+ y funciona perfecto