25ml Fast Drying Epoxy Gorilla Glue

Works

Produit de bonne qualité, je l'utilise pour bon nombre de repairs. Fonctionne parfaitement

Bought for a specific job in mind- Gluing 2 large garden gnomes to a sturdy base so they stopped tipping over. I have used epoxy before, and regularly use Gorilla products, so decided to give this a go. The instructions are clear and easy to follow. You snap the tip off, and push the plungers so that equal amounts of each liquid are dispersed. You can use the packaging to mix the resin in, and there is a little wooden mixing stick included too- there is a little tray dimple for small amounts, or just turn around for larger amounts. I used the whole package, so didn't need to reseal, but there is a handy cap to seal again if required. Epoxy works because of a chemical reaction, so you do need to make sure that both of the liquids are well mixed to begin the reaction and begin the bond. Once mixed, you can easily work the resin for about 5 minutes (depending on temperature) which is great for people who aren't too confident working with adhesives. After this, the resin will begin to harden, and bonding begins. I used this outdoors on a fairly brisk day, so it took a little longer to set, but when I went out to check on my gnomes they were pretty solid after an hour. Once set, the resin is resistant to temperatures down to -23 degrees, so I think it will fair pretty well in Scottish weather. My gnomes are grateful for their nice sturdy base! And I will definitely use the product again when creating my fairy garden and other outdoor decorations. ### Update end of may 2019- After a month or two of use, the adhesive has failed completely. Without much pressure, I was able to move the gnomes completely from their base- I only tested the bond because I was moving them to cut the grass that surrounds them now... Really disappointed by this product, as I expected it to last much longer than that!

Completely useless. I bought 2x packs of this for bonding a small piece of blockboard to a piece of pine on the underside of a bath, the blockboard weighs a few grams, it's really lightweight, but the joint needed to be strong and I couldn't get in with screws as it is quite a tight space, so this seemed perfect. Both surfaces were clean, dry and free from dust, dirt and beris. I applied exactly as per the instructions and the first thing that I noticed was that this glue has very weak grab properties and so the pieces of blockboard kept falling off, despite them being very light. I cut a few supports to keep everything in place and left it over night. As I took off the supports, one of the glued on pieces fell off and I noticed the glue was still sticky, it had not cured at all. I checked the tube and equal amounts of both liquids had been used and so I re cut some wood and did it again. Same again. Still very sticky and not really cured at all. I can only think this is a bad batch, but unfortunately, I bought two packs of it.

Goede 2 componentenlijm