eSUN Plant-Based Pro 3D Printer Rapid Resin, 405nm LCD UV-Curing High Precision PLA Based Resin Photopolymer Resin 3D Printing Liquid for Monochrome Screen 3D Printer, 500g Grey

Easy to use, dialed into my Mars 3 and printed faultless, white even stayed white when cured. Also has been the easiest resin to clean to date and I've tried lots! A regular was in ipa followed with a warm rinse of water done the trick. Highly recommend

I bought this resin for my first use on the Elegoo Mars 2 Pro - first of all the packaging and bottle - Container for this can rip your glove if you aren't careful, however, it doesn't take a genius to just twist the top of the lid rather than grabbing it like a bingo ball machines handle and spinning it like crazy. Apply slight pressure to the top, keep your palm away from the neck and give it a slight twist, it comes apart, easily. As some have mentioned, after opening the resin (Shake well first!) the lid can start to show signs of seepage when you next open it. Not a problem though, the bottle is delivered in a bubble wrap type of additional protection, which I used to store the resin in whenever I was done pouring it out.Since the Mars 2 Pro has a monochrome screen, exposure times can vary. I found that 35 seconds bottom layer exposure and 3.5 layer exposure worked well for my prints, I have attached examples of the prints made on the machine using this resin.As mentioned, it will change to a yellow tinged colour - If you over cure it, being new to this and worried about health implications of uncured resin (Plant based or not!) I went for the method of over curing as I knew they would be post processed anyway.So far no complaints, there is still a slight odour to the resin but nothing major, although I have no comparative because all I've used is this type. To that effect, I am unlikely to purchase other resins, the colours available from the plant based resin is a good selection, reasonable pricing and due to being plant based I believe it is safer overall for my health and in case any incidents should occur.Very happy with it!

Honestly I didnt believe the reviews about the bottle, seriously how could a bottle be that bad, well it is, it really is.But first thr positives, the resin is solid, prints well, is very low odour compared to most and well priced considering other low odour alternatives.But the bottle, oh dear lord the bottle. It has plastic teeth that will shred your gloves or hands, the plastic thread is badly fitted to the metal bottle so that resin drips between the plastic and metal and over the plastic so that even if you clean the plastic thread it will still run down the bottle because you cant clean under the plastic. The lid is badly threaded so that when you shake it resin collects, but doesnt run off (well a bit, down the outside of the bottle). Do yourself a favour and decant this into an old bottle or you'll tear your hair out every time you top up.

This resin is definitely the best I have used so far. I'm printing on my Anycubic Photon, and I generally used the Elegoo grey resin for it, but made the switch to this, and it prints faster, more consistently and with less smell and cleanup! It's a lot thinner, and so doesnt tend to cling to the build platform and surfaces as much.However, the bottle it comes in has to be the worst designed thing in existence! The seal has spikes facing towards the way you unscrew, so you'll likely rip your hand apart to open it, and once opened you'll find that you cant pour resin without some getting into said plastic and staying there after you're done, then slowly leaking down the side and pooling on whatever surface you store it on.I would without a doubt change my review to 5 stars if they would just change the damn bottle!

I bought the clear resin because I wanted to print some transluscent crystal-like items. After removing from the printer, it is lovely and clear and I thought was perfect. However hardening the print under UV (or the sun) turns it a very dark and horrible yellow-brown colour, as if it had been sat in a room with a heavy smoker for decades!

This is my first of resins but it's got a really nice finish too it. I used exposure time of around 8s for each layer and it seemed perfectly fine for it. No colour loss from the UV lamp. Decent priced too. The worst of it is the smell, and other water washable brands don't hum as much as this one. Really something I would not be breathing in. Did not set off my VOC detector at all though, well if anything only a little.

as others have said, pouring is a messy buisness. but product is good.works well in photon s. you do need a fume cabinet or very good ventilation as resin printing , even eco , is very smelly. Gloves, face masks and isopropynol are also a must.

Good resin cures well