Crescent 2 Piece X6™ 4-in-1 Black Oxide Spline Ratcheting SAE Wrench Set - CX6DBS2

Initially when I got it I was pissed because they were SUPER stiff to alternate from loosening stuff then to swap to tightening it BUT once I used it like 3 times they got super loose and I can flick it back and forth I’m a commercial oil burner mechanic and have used these to remove and replace condensate motors 51 feeders pump controls and all kinds of other bolts I have used and abused it soaked it in oil for furnaces (it’s just dyed red untaxed diesel) rust buster wd 40 all kinds of other lubricants and anti seizes and it still works perfectly fine I will say I did break a piece off of mine BUT it was my fault I kept smacking it against something metal essentially using it as a hammer and I broke the little tab that rotates the direction but on the other side it still works perfectly fine

I work in the HVAC field and I am constantly carrying work bags or totes and every single tool adds weight to what I have to carry daily. I replaced a larger wrench set with just these two and a very pleased with the weight savings, but also in the performance of the tools. The ratcheting part of the wrench works well it has not failed. The only downside is, they tend to rust if water gets on them. So keep them oiled!

I needed a 4 in 1 wrench for work so that I don’t have to carry as much in my tool belt. I chose this one based in the good reviews and the great price. They work awesome, nice and easy to use and very durable. Also, I love the black color of them, they look so nice. So far I’ve had them for over a months and they work great, seem like they are very durable and will last me a long time. I would highly recommend buying these if you are looking for a set of 4 in 1 wrenches.

Very large and heavy wrench. Probably a beast, not tested to failure............yet. If space clearance is no issue = super useful. When buying SPLINE wrenches/sockets, don't get the ones that claim "duel" standard of SAE/Metric, that almost always lets you down. For example, if you should need a SPLINE 1/2 inch wrench. Get a spline wrench that says 1/2 inch, not 1/2 AND 13mm! If you have to have a wrench that does both, try a wrench that is both 6 and 12 point(description below), I have seen those do it, with out damage. (in certain sizes.) STARWORK TRUE MECHANIC™ 2-Piece 10-in-1 Reversible Ratcheting

A little bigger than I expected but great because I have Big hands which makes them easier to grip no thicker than other 4 in 1's which is good and seem very durable and easy to use the black is a nice finish

I'm an electrician and have been using these everyday since I bought them. My co-workers also have used them and plan to purchase them as well. I mainly use them for building Kindorff racks to run conduit. They're a real life saver. It's so much easier to use these instead of trying to tighten nuts with a pair of channel lock pliers. Saves a lot of time and gets the rack nice and tight. I use 3/8" and 1/4" rods to build the racks so the 7/16" and 9/16" is what I use the most. Haven't had a single problem with them. Even used them in the rain before, got a little rust but after a few hits of WD-40 they were good as new.

I bought these on a flash sale and got them for a good price so i thought i would try them out. In an honest review i really like them they have some weight to them, they dont feel cheap. They ratchet really easy and have a durable confortable grip. The socket fits multiple types of nuts and bolt so it is convienient to not have to carry to many wrenches. The heads are a little big to fit in tight spaces but overall they are awsome

The little lever to swap direction broke on the small one after maybe a month. Still works but still was never abused honestly not even used much

Must have bought these one night after getting home from the pub ! No idea why I’d need sae but I love the look of them and I have other tools by same company which are great.

Put these to use on building a couple tables and chairs and they work great, so much easier the none ratchet styles

Las llevo en mi bolsa de herramienta, se sienten de buen material, y con su función de rach son muy buenas al ahorrarte tiempo en el trabajo, y si efectivamente son 4 medidas en 1 llave.

Incríveis, funcionam muito bem e são super práticas para usar, sendo 8 chaves em 2. Material bem robusto com ótimo acabamento.

As chaves são bem robustas e aparentemente bem acabadas.