GRAFT type 2 EV Charger Cable Organizer | Wall mount for electric car with IEC 62196-2 plug | Holder for type 2 wallbox charging station including anti-theft protection for cable and charger

My initial thought was that it was quite expensive for a simple piece of plastic. After several months I’ve decided it’s robust and well constructed and I suspect it’ll last for quite a while. The charger end clips in and releases easily and it stays dry in the holder. Recommended

I'm new to EVs and this is brilliant for securing my EV charging cable

A very good and robust cable tidy and plug holder. The plug is held firmly and secure with the sprung loaded clip and the cable is held nicely so that it doesn't fall off the front or sit touching the wall surface.However, I would highly recommend not using the supplied fixings with the supplied tool as the head and tool round and break down very quickly when used, so you end up replacing them with better quality fixings. I wasn't able to finish screwing all 4 screws, so had to remove and replace them all.

I bought this particular model as the socket is angled downwards which hopefully will protect against water ingress. There is a spring clip to lock the plug in place which is easy to operate, including when wearing gloves.The construction is all plastic aside from the spring clip, and it all looks like it will last well with everyday use.Fitting is easy, just four holes to drill. Fitting hardware is included, but standard screws or bolts will work fine if needed.So far, so good, and it appears to be good value for the cost.

Everything good, very long cable loops at least 9 times so plenty of space for the charging cable, plug fits nicely into it and has to date never let go, never wet so waterproof, mounting points well placed and rubber pads makes the mounting overtop of the cable if that’s the desired install a nice comforting fit as well

Very easy to install, four screws and it's solidly mounted.Like the security of having the cable trapped in place by the holder.Like the press to release button.Like the minimal, efficient design.

Lets be clear it does the job, but the security screws are a different matter, I would sincerely urge anyone else buying this to buy different fxings as the ones supplied along with the allen key are just appalling to use, took me an age fixing this to the wall with 1/4 turns.That being said now its on its great and its not going anywhere

I replaced an existing Wallbox mount with this and found it to be sturdy and well built. The clip mechanism which holds the charging adapter in place is good and keeps water out of the socket.