XXGO 3 Pcs 3-1/8 Inch 80mm Triangle Oscillating Multi Tool Sanding Pads | Strong Velcro , Hook & Loop Design , Triangular

these have worked fine so far. reasonable price and it keeps me working

Good quality accessories, Better price than compatible At your local hardware store

The hooks on these melt quickly if you try to use higher oscillations. I was using them as a replacement for the ones that came with my rockler sonicraft. They fit well, last for a few uses (if you go low & slow), and are way less expensive than the other products like it. I tried another brand to compare durability and got pretty much the same result. So, that issue seems to be a problem with this function of the oscillating tools. So, as long as you don't expect it to last more than a couple hours of actual sanding, they're good for getting into tight places where a larger sander can't fit. They probably last a lot longer if all you need to do is light finishing sanding.

These are as described and versatile for my assorted multi tools, fit well and value priced.

I just bought them cause my other one rutted out

Good thing they came as a package of 3 because the rubber melts very easily. Also the velcro is so-so. At least compared to my original Dewalt sanding pad. Other than that they work OK.

You need the universal pin adapter plate for the Sonicrafter which you probably already bought so you could use all brands of attachments on it. The original Sonicrafter uses an Allen wrench to change attachments, and the slot in this one is so you don’t have to take the bolt off, just loosen it, slide this on and wiggle it into place on the adapter which is easy. (Yes it took me a moment to figure that out. DOH!) I can’t speak to durability of the spot welds or foam yet, but the foam w the Velcro is nice and dense so it should remain flat during sanding. This is also taller than the original part but I don’t see that as a problem, it maybe an advantage. Last, a pro tip: use pieces cut from a heavy cotton sock on this attachment & some Novus #2 plastic polish to remove the haze on your headlights. Gotta be all cotton but it works great! If the haze is thick it’ll take a while to get it off the first time but after that it’s a 15 minute job for both sides when it starts to haze up again.

Absolute garbage. Each one lasted about 3 minutes before the rubber separated from the metal that attaches it to the multitool. You can see in the second photo the sandpaper is hardly used before this failed. 3 in package, all three failed.

Fácil de uso y práctico.

These backing plates always wear out quickly if the hooks get damaged and clogged with dust. These work well, and are affordable enough to replace as they become less effective

These were a perfect fit and the Velcro was great.

Doesn't seam to hold sanding pads

The only problem with this item is it doesn't have a solid base of velcro so it may not last as long as my Dewalt pad. It was good value though as the package contained three pads. Overall I am happy with the product as I have already used it and it holds the sanding pads well.