10x2.5 Solid Rubber Tire compatible with Segway Ninebot MAX G30 G30P G30LP

OMG, these tires are FANTASTIC. Don't for a second underestimate the ability of these things to absolutely smoke the stock tires that come on your Ninebot. I'm able to do things with these tires that I'd never dream of doing with the stock tubeless tires; I can go as fast on gravel as I can on flat pavement, and I don't have to worry about punctures or flats. It's crazy. And yes, they do provide a modicum of cushion, but don't expect total smoothness - for that you should install aftermarket shocks on your front and wheel tires.That said, these are a MAJOR pain in the *** to install. No joke. It's borderline nightmare, and I'm adventurous, have tools and stubborness. There was a moment when I seriously asked myself if I'd bitten off more than I can choose. But if you are persistent, carefully think about the tools you'll need, and do some research on YouTube to see how others mount them, you CAN do it. But I can't underline enough that even with that prep, these are a massive PITA to install. You WILL need to heat them in hot water. You WILL need to get multiple tire wedges to do this - I strongly suggest getting 11" motorcycle tire wedges with rubber grips. Do NOT expect you can replace this with the tiny wedges used for bikes. You WILL need clamps to remove the old tires from your rims. And you WILL need a lot of upper body strength. You CAN do it solo, but it's HARD. A friend may or may not help, but I managed to do it solo.They look great, fit well, and are just awesome. I can't be happier with the look and performance, but the installation... UGH. Nightmare. If you've never done any kind of modification on your scooter, do not start with these and take it all to a shop and have them do it.I love them. Glad I never had to replace them again. I just can't put myself through that experience one more time. But I fully plan to enjoy the ride these babies give me as much as I possibly can. Because of these, scooting is fun again! Love 'em.

I recently installed these tires on a Ninebot max 30 scooter. In the past I have tried with limited success to replace the rear tire with a tubeless tire. I was never able to get the bead to properly seat. I ended up replacing the entire rear tire and motor assembly on multiple occasions. The after market stuff does not last very long. For installation of these solid tires it is a must to let the tire sit in hot water for a while before install. This. will make the tire more plyable and able to be stretched over the rim. You also need a decent set of pry bars (three). The ones. that came with these tires worked for me. For the rear tire you need two sets of hands. I built a little stand out of four (4) ~ 10" pieces of 2x4. This is so I could lay the rim flat and was able to stand on one side while. we stretched the tire over the other with the pry bars. For the front tire I used zip ties to secure one side of the tire and then used the pry bars to stretch the tire over the rim. It really wasn't that hard. Once on, you need to use the bars to push and pull the tire around the edges to get it centered properly. Not hard at all. These tires are awesome for an electric scooter. Way better than trying to install tubeless tires. Highly recommend.

Includes 2 tires 2 metal pry bar. Fits perfectly with ninebot max. Hardest most difficulty tire installation in my life harder than car tires. recommend two ppl for this. If not, u need a bench vise(table clamp) to hold both the tire and wheel on one end while you pry the otherAfter going for a ride with it: it feels amazing, smooth... it feels better than the original pneumatic tire(update with photo) 2/2/2023 bought this on june of 2022i found out the tire started to rip (check photo) and the threads are gone. id say this tire last for 8-9 months at most if u use it everyday 15-18mph to get to places like i do. im questioning the material that was used to make this tire. the front tire that i have is the factory pneumatic tire. the threads are still there it wasn't rubbed clean like this honeycomb tire.

It would have been too much work for me even with my husbands help so he took it to a place where they could install it. So far so good, they even said thats better than the original wheel because its stronger and doesnt need air.

Fits the Segway Max G30 perfect as says. Don't have to worry about flat tires anymore

Did not fit. Inner width of the tires are too thick for the rim. This has put me in an unfortunate situation, I’m left not knowing what to do. I’m unable to get the tire back off the rim, and it’s not even fully installed, it’s partially spilled over on one side. Have spent over three hours trying to make this work, has caused damage to my rim. I’m thoroughly defeated, me along with a roommate, and a coworker, who have all had it out with this inanimate object. Super frustrated.

Good qulity but overheats motor

I fitted both tires to the rear of Segway G30 Max Scoots, one with aftermarket rear suspension, one without. The ride on the one without is pretty jarring. Unless you've got suspension (or very smooth paths to ride), you may be unhappy.The tires are a real challenge to fit, but I expected that, having changed tires on these things before. I did the boiling water trick and used the included levers and was successful. Eventually. You need to be strong, and ready for a struggle.Dispute these challenges I'm happy with the product. The piece of mind knowing I can't get a flat is worth the tradeoffs...but I'm sure glad my scoot has suspension.

Fit parfaitement sur ma G30 Max, roule un peu plus dure mais je m’y attendais et c’est normal étant donné l’absence d’air. Reste à voir la durabilité… à suivre