Tornado 20 Inch Pro Series High Velocity Oscillating Wall Mount Fan For Industrial, Commercial, Residential Use 3 Speed 5250 CFM UL Safety Listed

This is a great piece of equipment. The fan is built like a tank, everything metal, and built solid. Some minor assembly was required but fit on everything was perfect and assembly easy. Mounting was similarly easy and solid because the design was actually thought through. Finally, this fan moves air, really moves air...a crazy amount of air even at the lowest setting. Turned all the way up my home gym takes an hurricane characteristics. The fan is not silent, but for the amount of air moved it is also not that loud. Overall, extremely pleased with this product great fan...if I need another fan it will be another Tornado 🌀.

So this fan is truly a great product. I own a shop that uses fans to assist AC’s in keeping air flowing 24-7 and help keep the environment at a perfect range of temperature and humidity. This is a big powerful fan yet quiet and almost vibration free even on higher settings. I purchased a “like new” one at a third of the cost of a brand new one and couldn’t tell the difference. It outperforms all similar plastic, 16”18”20” fans I’ve had over the years. Mounting bracket is basic, black Steel, easy to mount but keeps fans about 10” off the wall unlike most other models that hug the wall. Very good fan, I leave mine on lowest setting and it moves tons of air. Very happy I purchased this fan and will be changing all my fans over this model.

This is going to sound like a really dumb mistake...but after putting this together (5 minutes and a phillips screwdriver) this thing moved hardly any air at all. I was SUPER disappointed. However, it was moving SOME air. I figured if I had the blades on facing the wrong way it wouldn't move any air, or maybe it would blow backwards? WRONG. You want the set screw on the fan hub TOWARDS the motor. Its harder to assemble this way and it seems like it wouldn't make a difference, but IT DOES! It went from a steaming pile of garbage to....well, a tornado! Likes: -Moves a lot of air -Seems well built -Oscillates properly -Makes my garage feel significantly cooler! Dislikes: -The only way to turn oscillation on/off is a knob on the top of the motor. I mounted the fan up high so it would be out of the way and move air around unobstructed. At over 6ft tall, I still need a step stool to turn oscillation on/off. I've decided to leave it on. -The cord could be a few feet longer, but I knew this when purchasing -Not the quietest thing out there, but its an industrial type fan... Its not an annoying tone though, can be tuned out easily enough, and if you have a radio going I forget its even on. - 3 speeds seem like medium, high, and higher? A lower setting would have been nice as there's not a huge difference between the 3 speeds. For the sub ~$100 price, I don't think you can beat it. I would absolutely recommend it.

Heavy duty, and a bit loud, but really throws the air. We were already satisfied when I discovered that the speeds start low>medium>high (most fans start at high) and I only pulled the chain once. It had 2 more settings to go. At least one other review complains about the lack of air movement, but if you look at the pictures, they have the blades backwards.

The people who complained about the CFM MUST have installed the blade wrong. The blade needs to be installed with the set screw on the underside AND on the flat of the shaft. If you put the blade on with the set screw facing you (which is easier to tighten) you will have little to no flow. I didn't read the instructions so my label is not facing the right way but then again I ended up mounting mine upside down (on purpose) anyway. My only complaint is that the mount has horizontal holes for stability and for me on a block wall its great but if I were to mount this to a wall stud I would be drilling vertical holes in the center of the round mounting bracket. Well built old GE type knockoff that blows a ton of air even on low. Cost to run around the clock at .14 cents per KWH is about $10 a month.

My garage is also my mancave. I have a bar out there some chairs TV etc... But it's a garage so it's hot humid etc. I had a few pedestal fans over the years out there to circulate the air so that the recliners don't get mildewy smelling etc from being in a garage. Someone suggested I get a wall fan an industrial style with three blades so I ordered this one. I used a Piece of birch to mount it where I needed it, since it was in between the wall studs. Now on day like today where it rainy, running it on low the air is circulating throughout entire garage where I mounted it. Being that it's an industrial fan it's louder than the pedestal fans I had. That is the only thing I can say about it. Also I didn't get a remote an this review asked me about that so I'm gonna look into seeing if I was supposed to get one. If not no big deal. But it works an moves so much more air that it's worth it. I may order another on for my soon to be enclosed deck.

On high speed, I could not feel the air from this fan more than 4’ away from the face of the fan.

These fans are great. Large size. Moves a lot of air.

Llevo años comprando ventiladores de plástico de buena calidad (según) pero tarde o temprano terminan por fallar ya que generalmente los prendo por mas de 10hrs continuas al día y, o el motor falla, o deja de aventar la misma cantidad de aire. Este ventilador en particular avienta muchísimo aire, mucho mas de lo que imaginé. Me sorprendió el precio pero valió cada centavo al ver que genuinamente sobrepasó las expectativas, tan es así que hasta termino tapado al dormir. Lo recomiendo bastante.

Increíble, mucho aire!

Considero que estoy pagando la importación para que me llegue a cancún. El material se ve reforzardo , tenia un poco de miedo después de haber hecho la compra. Ya que decían que era ruidoso. Pero para mi en lo personal esta bien. Lo compre para recamara. No viene con los taquetes pero no fue problema para mi.

Instrucciones de armado y montajes insuficientes. El motor es demasiado pesado, ya instalado, hace que el ventilador se incline hacia abajo; no se sostiene en otra posicion, la inclunacion no se puede regular. La velocidad baja es muy alta y la alta altisima. Buenos materiales; mal diseñado