24V COB LED Strip Light Warm White 3000K 5M/16.4ft 2400LEDs 4500Lm Uniform Glow CRI 93+ Flexible IP20 Not Waterproof LED Tape Lights for DIY Cabinet Bedroom Kitchen Home Decor(No Power Supply)

Probably one of the best 24V COB LED's I have tried. Very nice light for our shelves. Paired it with black 90 degree clip-on LED covers so that the LED tape would not strip the paint on my shelves if I needed to swap the color. Pros: 5-100% dimmable, works great. Super easy to cut and solder. Extremely even bar of light Wires easy to hide (24v vs 12v) Cut lines are close together Cons Needs higher wattage dimmer

This LED tape is the perfect brightness for my application. I used it for lighting my workbench from under a shelf above the bench. At 24 inches away, it is more than enough light for detail work, and the color very closely matches the daylight coming in a nearby window. I have the tape mounted in an aluminum channel with no diffuser, just for the heat dissipation. There isn't a huge amount of heat, but the channel does get slightly warm. I have powered about 2M of tape from a 24V power supply, and it pulls just over 750mA, so I would estimate about 400mA per meter at 24V. EDIT: At the one-year mark, these are retaining their brightness very well, and I am about to buy another roll for under-cabinet lighting in my kitchen. After using them several hours per week for the past year, I haven't noticed any changes in brightness and there are zero dead spots.

I looked everywhere for a reasonable priced strip of lights and this fit the bill and great quality! Love that I can get in almost 50ft length

These are super bright. Easy to install. You can cut them where there are copper pads on the ribbon and they solder easily if you are cutting and installing custom lengths. They maintain equal light intensity for the entire length. No fading at the end of long runs. Highly recommended.

Brightness and LED density are great. The strip is terminated with a pair of wires on one end, and a barrel jack on the other. Also included is a short length of jumper wire and a couple connectors, which i appreciate. Color temperature & quality are good, but not quite as consistent as I needed. The center of the “beam” is what I expected given the 92+ CRI rating, but towards the edges the light changes to a noticeably yellow-green tint. If these were installed in black aluminum channels with diffusers, you wouldn’t even notice, but for surface applications I find the color shift to be a problem. I didn’t test adhesive backing.

Worked great for a lighted tool box mod. I wanted my top drawer in my US General Series 3 56" toolbox to light up when I opened it. I used the sticky back on this and was not worried about the strip heating up too much because the steel of the drawer absorbs it. Pretty overkill but very cool. I have plenty left over to use on other projects.

The Natural White color was perfect for my lack enclosure. Each track has 2 strips to maximize the amount of light. I would definitely buy again for other lighting projects

Used miles of this product in various lengths in acrylic channels to light closet interiors. Easy to use, long lasting, good adhesion, accurate dimensions and nice light output.