WiZ Connected Indoor Motion Sensor - 1-Pack - Connects to Your Wi-Fi- Works with WiZ Connected Products - Batteries Included

Working product. Easy to setup.

First id like to mention that you need to pop off the back and tab to install the mount and battery. I was confused at first because no instructions were provided and the app wasnt much help. The sensor works per room! So it will only work for ALL the lights in that room. I just wanted it for the bedroom so i had to separate the ceiling lights and table lights into different rooms on the app. Its great otherwise! You can setup when it should detect motion ,what the detection does (turn on lights, change color, etc), and add a feature if motion not found after X time. Other than these small hiccups, deff recommend.

Buyer Beware! This unit only works with Wiz Lightbulbs and nothing else! According to their ad here on Amazon - "Once your Motion Sensor is set up in the WiZ App, use Alexa, Siri Shortcuts, or Google Assistant to control 'YOUR LIGHTS' with voice. No hub is required, simply follow the pairing steps in the WiZ app for your favorite voice assistant." At the time ad simply stated: "Compatible with Alexa and Google Home Assistant, White". "No HUB required"! However - you DO need to buy Wiz [propriety] Lightbulbs! I guess they were hoping - that once i'd mistakenly purchased their cheaply made gizmo, i'd feel stuck buying their other accessories. No Dice. I sent their junk back to Amazon who very graciously refunded my money. Wish i'd not wasted my precious time with Wiz products. :-( When i received this product, it's box clearly states, "WORKS WITH ALL WIZ CONNECTED PRODUCTS". What?! It would have been helpful if they'd said this here in Amazon. But no. Sure - so long as you only use "WIZ" wifi light bulbs. But NOT with the wifi light i bought - which was rechargeable specifically because it's one part of our flat that has no outlet or light sockets. I feel this is (at the very least) "misleading".

Good: Setup is easy. It detects movement and turns on the wiz bulb instantly with no lag. That's why i bought it for. Bad: Not much info on how to set it on the wiz app. You will find it and set it under Settings / Accessories. Also not alexa/google compatible. You cannot use it to trigger routines or do fancy stuff. It's only for wiz devices so, beware of that.

Would give a 4.5 or 5, but for the pairing. Not sure if supposed to come with batteries, but did not, and appeared it may have been previously opened. Pairing it came up right away but then gave an error attempting to complete the process. Tried a few more times with same results. Luckily looked around in the WiZ app and found that it had been added to accessories area of app (DOES NOT SHOW UP IN THE ROOM). Was able to adjust settings there and test and use successfully with a single nearby bulb. Box claims this doesn't require WiFi, so it must be using radio/Bluetooth/? to connect to nearby bulb(s) in same "room" to receive any settings updates and control the bulb on/off. Overall happy so far for what we were looking for (lamp control at bottom of stairwell as we're walking down).

100% as advertised.

I've long used a motion sensor for my living room light. It would shut the power off whenever I would stay away for too long. It was simple and did exactly what I needed. However, I just "upgraded" to a Wiz smart bulb, which seems to disconnect from the network if I turn off the power too often; with a dumb sensor, the power constantly goes off and on. The smart bulb can't handle that, so I resigned myself to using the Wiz remote and Wiz motion sensor. The first strike against the Wiz sensor: it's battery-operated instead using an AC plug. Worse, changing batteries requires a screwdriver! Functionality is poor. Yes, it detects motion (though it only sends commands at fixed intervals), but it controls the light in a stupid way. While I want it to turn on the light when sensing motion, I also want it to leave the light alone when it's on. For example, I set up an automated rhythm that dims the light at night. However, sometimes I need it to be brighter so I can do some task, so I use the remote to increase the brightness. The sensor, meanwhile, sees me and sends the "Power on" command, and dims the light according to the automation. I need the sensor to see me and "do nothing" if the light is already on. The app doesn't allow this. The only basic choices are "Power on" and "Brightness change." The sensor ignores when I have manually turned off the light. I'll use the remote to turn off the light, only for the sensor to turn it back on. I turned off the light, went to bed, and the following morning when I went to open the blinds, it turned itself on. I want the sensor to turn the light on, but it needs to recognize when I've turned it off and keep it off. And finally, the sensor light is an ugly bright blue.

I could get this device to connect in the Wiz app, but it didn't detect motion adequately. Does not have much functionality for motion controls or controlling specific devices in the Wiz app. I tested 2 of 3 of the sensors I ordered and ran into these issues. Does not have Matter or Alexa integration.

I have 4 of the Wiz motion sensors in the house. They do not work all the time. 2 of the motion sensor stopped working suddenly after a few months in operation. I think there is some problem with the software.

Estuve investigando como podría configurar este accesorio, porque realmente la ayuda no es muy explícita en la página de WIZ, que la verdad, hay que recomendarles que den un soporte mas explicativo para los usuarios, porque sus dispositivos inteligentes son realmente buenos y con una integración más que satisfactoria. Una vez comprendiendo como se debe integrar al ecosistema de WIZ todo es mas sencillo. OJO solo funciona con luces WIZ, no de otra marca, no es para mezclar con otras marcas. Al agregarse pareciera que no aparece en la habitación donde se ha agregado, pero en realidad está en ACCESORIOS, y ahi hay que ingresar, fijar a la habitación donde la luz será automatizada por el movimiento. Se indica la duración por la que la luz permanecerá encendida al detectar movimiento. Se cambia el valor en minutos para omitir detección después de haber apagado o encendido manualmente la luz. Una vez establecido eso, funciona de maravilla. IMPORTANTE: Dentro del dispositivo donde se colocan las pilas hay un selector tipo interruptor que se establece desde donde se espera el dispositivo detecte movimiento, desde la izquierda (L) o la derecha (R) hágase la configuración tomando estos detalles, nada de forma instantánea o sin paciencia de otro modo solo van a escribir reseñas de frustración, no funciona, etc. Sensor de movimiento WIZ para uso en luces UNICAMENTE WIZ. Ojalá el fabricante haya un video tutorial con todos los pasos correctos para la puesta en marcha, porque vale la pena la inversión, pero sin un instructivo real, deja mucho que desear.

Excelente producto, el único inconveniente es que se asigna por habitación, así que solo controla las luces de esa habitación, no puedes combinar tipo la tira bajo la casa y la luz del baño si la quieres como luz nocturna.

Solamente prende la luz cuando quiere, no tiene forma de ponerle horarios de funcionamiento y además no apaga la luz al dejar de detectar movimiento, nada recomendable

Sirve para lo que es, pero no me gusta que no se puedan programar horarios en los que el sensor funcione o no. Solo puede programar el tiempo de monitoreo y si se apaga de forma manual, qué tiempo tardará en volver a detectar movimiento. Por lo que tienes que hacer varias cosas como configurar escenas y colores si es que quieres que la luz se mantenga apagada o que se controle el nivel de iluminación, lo que hace un poco tedioso su uso, pero es lograble. Y solo funciona con la luz de la marca. No se puede usar con Alexa ni con Google home, solo desde su app.