---
product_id: 4076774
title: "Battery Isolator, 100A, Black"
price: "€ 75.26"
currency: EUR
in_stock: true
reviews_count: 13
url: https://www.desertcart.ie/products/4076774-battery-isolator-100a-black
store_origin: IE
region: Ireland
---

# 100A high amperage power flow IP62 water-resistant durability Includes mounting bracket for easy install Battery Isolator, 100A, Black

**Price:** € 75.26
**Availability:** ✅ In Stock

## Summary

> ⚡ Stay Powered, Stay Ahead – The Ultimate Battery Isolator for the Modern Driver

## Quick Answers

- **What is this?** Battery Isolator, 100A, Black
- **How much does it cost?** € 75.26 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.ie](https://www.desertcart.ie/products/4076774-battery-isolator-100a-black)

## Best For

- Customers looking for quality international products

## Why This Product

- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Trusted by Pros:** Manufactured by BATTERY DOCTOR, a name synonymous with automotive reliability since 2010.
- • **Compact Yet Mighty:** Lightweight 1-pound design with a sleek 10.5 x 6.7 x 2.3 inch profile fits seamlessly into any vehicle setup.
- • **Effortless Installation:** Comes with a sturdy mounting bracket for quick, hassle-free setup—get back on the road faster.
- • **Power Up with Confidence:** Handles a robust 100A current to keep your vehicle’s battery system optimized and safe.
- • **Built to Brave the Elements:** IP62 water-resistant rating ensures reliable performance even in wet or dusty conditions.

## Overview

The Battery Isolator 100A by BATTERY DOCTOR is a compact, water-resistant (IP62) automotive accessory designed to safely manage battery power flow. Featuring a 100-amp capacity and included mounting bracket, it ensures easy installation and reliable performance for trucks and cars alike. Perfect for professionals seeking durable, efficient battery management solutions.

## Description

Battery Isolator, Includes Mounting Bracket

Review: new generation of battery isolator. - this is a new method to maintain 2 batteries in a boat or RV, but keeping them isolated. It works well, requiring very little in the way of installation. (couple screws, couple wires, etc). If you are old school and know about the larger diode charging blocks (typically 2" x2" x 5" with large cooling fins) this is will do a similar function, but in a different way. This has a circuit to monitor the voltage, and when the main battery is charged enough, it will open up the charging to the aux battery (think boat starting and trolling motor). so as the first one charges up, the second will then begin charging. I contacted to the company to get their insight if would work correctly with an "A/B/Both" battery switch and they assured me that it would work (always turning on the battery to A, unless you have an issue, then you can use B or Both without worrying about the battery doctor having problems. the product does pull about 30mA when the boat is not running, and the way I have wired it, this happens even if my A/B switch is off. 30 mA will take a long time to drain a 100Amp Hour battery, but it is something to know for long term storage. I also added a trickle charger at the same time and this will actually allow the trickle charger to charge the main battery first, and then open up to charge my aux battery second. never wanting to be caught without a battery on the lake, this is an important component for my boat.
Review: works easier then described. - as described I attached the unit to sheet metal with velcro, then black wire to ground and finally first power from fused auto to main terminal and then power from aux terminal to second battery positive terminal. all in all, 5-10 minutes including making custom cables. When ground wire first attached, nothing happened, then when attaching power from car, I got a flashing red light, now with second battery terminal hooked up, I got solid red. start engine and after 5-10 second delay you see a bright blue light, just as described. You can make your own relay set up, however both batteries will be in parallel, to start car, with this unit only starter battery is used. Now if starter battery dead just push a button which activates relay, and both batteries now in parallel to start your car. there is a model 20092 which is rated at 125-150 amps instead of 75-100 amps, which had I known about I would have spent the extra $20 or so on. Needless to say it worked perfect and extremely easy to install. With this unit you can throw away your booster cables as they will no longer be needed.

## Features

- Auto & Truck Maintenance
- Country of manufacture: China
- Manufacturer: BATTERY DOCTOR
- Water-resistant (IP62)

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B004QCDE9M |
| Amperage | 100 A |
| Best Sellers Rank | #150,204 in Automotive ( See Top 100 in Automotive ) #622 in Battery Chargers |
| Brand | WirthCo |
| Customer Reviews | 4.4 4.4 out of 5 stars (160) |
| Date First Available | December 23, 2010 |
| Item Weight | 1 pounds |
| Item model number | 20090 |
| Manufacturer | BATTERY DOCTOR |
| Manufacturer Part Number | 20090 |
| Model | Battery Isolator, 100A |
| OEM Part Number | 20090 |
| Product Dimensions | 10.5 x 6.7 x 2.3 inches |
| Safety Rating | Não Aplicável |
| Voltage | 12 volts |

## Product Details

- **Brand:** WirthCo
- **Color:** Black
- **Product Dimensions:** 6.7"D x 10.5"W x 2.3"H
- **Item Weight:** 1 Pounds
- **Output Voltage:** 2.4E+2 Volts

## Images

![Battery Isolator, 100A, Black - Image 1](https://m.media-amazon.com/images/I/81y8seYSjcL.jpg)
![Battery Isolator, 100A, Black - Image 2](https://m.media-amazon.com/images/I/91c06csimnL.jpg)
![Battery Isolator, 100A, Black - Image 3](https://m.media-amazon.com/images/I/41C9FunD51L.jpg)
![Battery Isolator, 100A, Black - Image 4](https://m.media-amazon.com/images/I/710tGGGY9TL.jpg)
![Battery Isolator, 100A, Black - Image 5](https://m.media-amazon.com/images/I/71BoBxqrwQL.jpg)

## Available Options

This product comes in different **Size** options.

## Questions & Answers

**Q: Can this be connected to a car battery then to a lithium battery pack for the purpose of keeping the lithium’s charged? Lithium for car amps**
A: No.  Lithium batterie$ need a $pecific charge controller. ($$$)

**Q: does the blue light stay on**
A: The blue light indicates that the primary battery is connected to the alternate battery and charging. This happens when (1) the vehicle's ignition is on and (2) the primary battery is being measured at 14V or higher.
Also, after turning off the ignition there is a delay of less than a minute before the batteries are isolated. The blue light will remain on until completed

**Q: i bought this three months ago.  the battery continues to drain.  always stays at 11.7 v.  i dont know if thing is broken or what.  what do i do?**
A: I would not continue to let the batteries drain to 11.7 Volts.    Never let you battery bank get lower then 11.9 Volts.  I would replace your battery isolator.

**Q: Can I use this with a 200 amp alternator or will it hurt the unit**
A: This unto will work fine. Your alternator may be rated for 200 amps. That rating is right before is burns up. There are other loads in your car that will take power while it is running. There is no way your alternator will push 200 amps to your battery.

## Customer Reviews

### ⭐⭐⭐⭐⭐ new generation of battery isolator.
*by D***N on July 27, 2015*

this is a new method to maintain 2 batteries in a boat or RV, but keeping them isolated. It works well, requiring very little in the way of installation. (couple screws, couple wires, etc). If you are old school and know about the larger diode charging blocks (typically 2" x2" x 5" with large cooling fins) this is will do a similar function, but in a different way. This has a circuit to monitor the voltage, and when the main battery is charged enough, it will open up the charging to the aux battery (think boat starting and trolling motor). so as the first one charges up, the second will then begin charging. I contacted to the company to get their insight if would work correctly with an "A/B/Both" battery switch and they assured me that it would work (always turning on the battery to A, unless you have an issue, then you can use B or Both without worrying about the battery doctor having problems. the product does pull about 30mA when the boat is not running, and the way I have wired it, this happens even if my A/B switch is off. 30 mA will take a long time to drain a 100Amp Hour battery, but it is something to know for long term storage. I also added a trickle charger at the same time and this will actually allow the trickle charger to charge the main battery first, and then open up to charge my aux battery second. never wanting to be caught without a battery on the lake, this is an important component for my boat.

### ⭐⭐⭐⭐⭐ works easier then described.
*by T***Y on September 4, 2014*

as described I attached the unit to sheet metal with velcro, then black wire to ground and finally first power from fused auto to main terminal and then power from aux terminal to second battery positive terminal. all in all, 5-10 minutes including making custom cables. When ground wire first attached, nothing happened, then when attaching power from car, I got a flashing red light, now with second battery terminal hooked up, I got solid red. start engine and after 5-10 second delay you see a bright blue light, just as described. You can make your own relay set up, however both batteries will be in parallel, to start car, with this unit only starter battery is used. Now if starter battery dead just push a button which activates relay, and both batteries now in parallel to start your car. there is a model 20092 which is rated at 125-150 amps instead of 75-100 amps, which had I known about I would have spent the extra $20 or so on. Needless to say it worked perfect and extremely easy to install. With this unit you can throw away your booster cables as they will no longer be needed.

### ⭐⭐⭐⭐ works great - updated (LiFePO4)
*by F***S on June 3, 2018*

Update 2023: when my FLA bank died I replaced it with 150Ah of LiFePO4. I assumed I'd need a DC-DC. But I fired it up with the VSR in place and it works fine. Over the last ~20 runs, the average state of charge before start was 72%, bank voltage 13.20v. Charge acceptance after start was 0.183C (27.39A). See note below about using a switch to deactivate the VSR when desired. ------ I've had the isolator installed for [three years] and it has worked great, no problems. I would like to bring up a few points: * folks often say that this voltage-sensing relay connects the Aux battery when the starter battery is "fully charged"; that's not really what happens. Per the manual and my observation it makes the connection when the starter battery is >= 13.4v. Lead-acid chemistry batteries take hours to get "fully charged" (100% state of charge). In practice this means you'll start the vehicle and a few seconds later the relay will 'click' and you are connected. I don't know but I suspect this stepping-up in load is easier on the alternator. * if you are charging the aux battery[s] from another source while the batteries are connected (engine running, or recently turned off) any 13.4v+ charging voltage will be seen on the starter side and the relay will not disconnect. This may or may not be what you want. See below. * you can put a switch on the slim ground wire to deactivate the isolator. This might be useful if you want to do something like equalize the house batteries without feeding that voltage back to the vehicle. [I installed a High Voltage Disconnect (a few bucks here on Amazon) to disconnect the Doctor when solar raises the house side above 14.1v.] [I read a report about one of the connectors getting overheated - I suspect that person had a loose connection that overheated and melted the plastic. Remember to check your connections when you maintain the battery bank!]

## Frequently Bought Together

- WirthCo 20090 Battery Doctor 75 Amp/100 Amp Battery Isolator , Black
- NOCO GENIUS2D: 2A 12V Smart Onboard Battery Charger - Direct-Mount Automatic Maintainer, Trickle Charger & Desulfator with Overcharge Protection & Temperature Compensation – For Lead-Acid Batteries
- NOCO GCP1 15A AC Port Plug, 125V Power Inlet Socket, and Waterproof Electrical Outlet Receptacle Box with 16-Inch Integrated Outdoor Extension Cord

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.ie/products/4076774-battery-isolator-100a-black](https://www.desertcart.ie/products/4076774-battery-isolator-100a-black)

---

*Product available on Desertcart Ireland*
*Store origin: IE*
*Last updated: 2026-11-16*