Freshware 3-Cavity Silicone Disc Cake, Pie, Custard, Tart and Resin Coaster Mold

UPDATED (as noted) Finally! The perfect pan to make 4 inch diameter eggs for English muffin sandwiches. I've previously tried silicone rings in a frying pan but the egg always ran from under the ring. Muffin top pans, even a well-greased "non-stick" one had eggs stuck to the pan. My pan was particularly hard to clean because there was a round groove/seam around the lip of each baking cup. (Ever tried scrubbing baked-on egg using a toothbrush?) I tried the Freshware Mini (6-cavity) but the eggs were way too small for the muffins. The medium 3-cavity baked the eggs perfectly and not a bit of egg stuck (I used baking spray before filling). The cavities are 4" round with straight, non-tapered sides and is deep enough to hold 2 eggs in each cavity. (UPDATE: I have found that one egg per cavity makes a really thin egg "patty." I find better results with putting 1 1/2 eggs in each (For 6 cavities, I SLIGHTLY beat 9 eggs, then fill evenly. I cook at 350 approx 15 minutes, but you'll see the edges of the egg actually lift up out of the pan when they're done). These molds are thicker and more sturdy than the Mini 6-cavity. Those are so thin, soft and flimsy that you can't wash them upright in the dishwasher. This medium mold stands up when braced in the bottom plate racks. I will still use the mini molds, but the size of the egg would only be suitable for standard sized biscuits. The mini makes about a 3" egg but the cavities are tapered down to about 2 1/2 inches in the bottom.

The mold is really good, just going to have to find a different use for it. I initially bought them for making chocolate covered oreos. What people have to review is the product, not the fact that they THOUGHT they could use it for something and it didn't turn out. If you're not happy, then return it, don't blame the product! The reason the petite size did not work is because, (even though it is large enough as far as diameter goes (perfect actually)), while the diameter is the right size, the diameter or the bottom is rounded and you cannot push the oreo down enough. If you do, the oreo will show through when you pop them out. If you do manage to push them down, they will be flush with the mold and so the chocolate will not. The bottoms will be lumpy. They certainly will not look perfect, but perfection is over-rated. They were good for bringing to the office for Valentine's day. So good, no one even noticed that the oreo was showing through, or that they had hump bottoms! Bottom line is: I do recommend this product because it works great. The chocolates popped out easily and shiny! Maybe use them to make fancy, smooth looking peanut butter cups.

I have just placed an order for a 3rd one of these. I use these to make resin coasters with alcoholic ink and they work perfectly. This particular one was recommended by a youtube tutorial I was watching. They are durable, thick and work great for exactly what I need. The color does fade over time - I ordered my first one a month ago and have probably used it about 15 - 20 times before the color started to fade. So I ordered another one last week and just placed an order for a 3rd one this morning. I was looking at others but saw the mixed reviews so I decided to stick with what I know. Very satisfied, fast shipping, quality product, thanks!

One of those things you buy to check it out and then ends up being a "go to" mainstay. Just fits on our microwave turntabe. The six circle molds don't. Got this to microwave beaten eggs for sandwiches that would fit an English muffin. Really good with chopped onions and red peppers. I've made them ahead several times and even frozen them for something quick and travelling. Super easy egg foo yung patties. Works for a hamburger mold. A pleasant surprise. Found out a single batch of Kodiak high protein pancake mix fills the three rings perfectly. Two minutes and done. Fit a toaster for reheating. Just remember to pop them out right away. Chocolate with walnuts? Yum. Sprinkle with confectioners sugar or chocolate syrup or serve with ice cream? Super yum.

Bought these to make McDonalds like egg McMuffins. It gets the job done. But the first 2x I used it in the oven (even after washing) it smelt horrible. And the corners fold down which caused a leak before I learned to put balled up aluminum foil under the corners before baking.

Love this! It has improved my life in a major way! My insulin-resistant husband and I are learning to cook and eat without so many carbs, and bread is really hard to give up. Really hard. But because of this awesome little mold, my lettuce-wrapped-hamburger eating days are behind me! Yeah! This mold turns out the BEST flour-free hamburger buns ever! Because the "dough" is based on beaten eggs (and almond meal), it tends to be runny, and needs a mold to keep its shape during baking. But the finished "bread" is so tender, it's tricky to get it out of a metal or glass pan in one piece. But nothing sticks to silicon -- I just pop the finished rolls right out, easy peasy. And the dough rises and bakes evenly in the silicon, too. This mold is the perfect size, the perfect shape, and the perfect material for making perfect, hamburger-bun sized rolls, every time! Or sandwich fare -- so grilled cheese and BLTs are back on our menu! In fact, I need to order another one, so I can bake six at once!

Bought two of these to make egg and sausage patties for breakfast sandwiches. This size fits perfectly on an English Muffin. Hold just the right amount. I whip my eggs with a stick blender and fill each cavity with about 1/2 of a large egg, cook them, then fill them again with about 2 oz of breakfast sausage. I put the mold on a cookie sheet BEFORE filling it so I can slide it into the oven. Obviously, silicone is floppy! I mass produce the patties, freeze them on a cookie sheet, store them in a zip lock bag, then just slap them together at breakfast time. I toast the English muffin and heat the frozen sausage and egg patties in the microwave. Melt a slice of cheese on top of the sausage and it's a yummy, gooey breakfast. Silicone is supposed to be non stick, but I recommend giving the cavity a quick spritz of cooking spray before filling. The patties will release much easier if you do.

This mold was highly rated by several resin influencers so I decided to purchase. When item came it had sooo many scratches,smudges, and dings. Absolutely could not use for resin as all of that will show up on my pieces. Decided to return and have another delivered as I thought it was just bad luck. The second mold I received was even worse than the first! I ended up ordering a $7 mold that came perfectly and has worked great so far! 2 strikes for me. Will never purchase again. Wanted to make other resin users beware since there is almost all good reviews!

El molde es perfecto. La calidad es de la mejor que he probado hasta ahora. Es la única marca que hasta ahora me ha dado el mejor resultado.

I might have bought these molds for a totally different reason than other people - I use them for making resin coasters! The quality of these molds is the best I've seen. They are so shiny! They are perfect to use resin with. I love them so much, I just bought 2 of their other molds. Can't wait to try them out. If you are looking for quality, as well as other uses for these molds, you can't go wrong with Freshware!

Los utilizo como moldes para vaciar resina y funcionan de maravilla.

Performs exactly as advertised. Use a dab of margarine to coat the inside, the bun cooks perfectly and releases by simply turning the mold upside down. Cleans up by rinsing with water and a bit of finger swabbing. Dry with paper towel and its ready for the next time. Great addition to kitchen cookware!

It's exactly as advertised. I'm using it to cast epoxy resin, and it works nicely.