E6 Bamboo 3-Stage Dual Motor Electric Standing Desk 55 x 28 Sit Stand Up Desk, Holds 220 lbs, Adjustable Height w/ Memory Presets, Solid Bamboo Desktop & Black Frame, Ships in 2 Boxes

What a nice surprise! The quality of the bamboo tabletop is excellent. There was no warping, and the finish is perfect. The instructions included were sufficient to set up the desk easily, and the dual motors are perfectly synchronized. The desk is stable, and the control pad works well. I’m 6’ 4”so the extra few inches of height this desk features provides more comfort. The only improvement could have been more wire clips included, or better yet, ones of higher quality. We found some 3M Velcro straps that we used as substitutes, and used a small screw to make sure they would properly hold up the wires on the underside side of the desk. We also purchased some cloth baskets to help hide the computer and accessories wires underneath the desktop. There are many choices on Amazon. Overall the desk is an excellent value for the price.

surprisingly great desk! this one, unlike most others, goes low enough that I don't need a keyboard tray; just set the keyboard and mouse on it, and set the level I want. It has nice clean lines, very, very solid construction, silent operation, some cable routing (and ez to add more). I did buy a 3rd party small drawer to add, just to declutter my desk...and to keep my cats from running off with my pens! I did the non-bamboo variant; it's quite thin (but strong and solid) so any mounting h/w needs to use very, very short screws, but that's no hardship. I was a bit skeptical at first but would absolutely buy this again/buy from flexispot for other products. Zero, wobble (and I mean zero!); most ikea junk isn't nearly this steady. The instructions took a little thought but it was very ez to assemble overall.

Good quality desk that is stable when raised. The dual motor helps and is a better option than cheaper with a single motor. Programming sitting and standing height is very easy. The motors are not loud and work smoothly. This is a great option if you just need a good quality desk without a bunch of and whistles. Very good deal for the price. Note on assembly: as others have stated the assembly is a little confusing particularly the attachment of the under bar parts since there are no pre drilled holes in the middle. You can try to drill them yourself but there are not clear on but sizes etc. you might just want to skip the middle holes and screws entirely, I'm not sure they really make a difference and when I tried them in, it was a mess.

This standing desk exceeded my expectations. The bamboo top looks beautiful and feels sturdy, and the dual motors make height adjustment smooth and quiet. Assembly was straightforward with clear instructions, and everything feels solid once put together. At 72x30 inches, it offers plenty of workspace. Overall, a high-quality desk that’s functional, stylish, and easy to set up—definitely a great investment for a home office.

Nice! Very smooth transition from sitting to standing position. I use one of the extra memory slots for a typing position, otherwise the normal height (sitting) is level with my other tables. You can really feel the solid quality of the one-piece table top. It's also really sturdy and doesn't wobble around at all. Assembling it was fairly easy, my son helped me. I do recommend having two people to assemble it. While it's not heavy, it's at a size where you can't flip it upright without risking your back or potentially scratching the table top. The manufacturer does offer a couple of drawers you could get for it but they are too large, I just want a pencil drawer. The maximum drawer depth you can get is 11 inches deep due to the frame that the table top sits on. I did find a suitable pencil drawer and will update this review once I receive it.

When I started to work for home I needed a sit/stand desk. I had purchased a flexispot desk before at the quality for the price is unmatched. It is easy to put together and to use, there is no wobble and very stylish.

There’s a couple spots in the assembly instructions that could have probably been less vague. Other than that, it was fairly simple to assemble. The 55”-long table is perfect for a larger (non-pro) single 3D printer with enclosure and a decent sized filament dryer. It’s “150 lbs” weight is plenty stable to keep my printer from doing the “Jailhouse Rock” and taking the whole table with it. Performance of the mechanics of the table were smooth and silent. The controls were intuitive - very easy to use. When assembling, use a finishing nail or something similar to line up your pre-drilled holes in the table top with the attachment holes in the frame. Check your alignment again with a metric tape measure (5.5cm from the edge of the table. It’s easy to misalign your base/legs if you don’t take a little extra care during assembly. The black legs with the bamboo top is awesome. Bamboo is a fabulous and entirely renewable resource that looks really amazing. And it’s weight adds to the ability to hold the table down under vigorous printing. I’m 6’3” tall and am at the point where I’d prefer not to have to bend over to tinker with my printer. It comes up to a perfect height for me standing straight up. And since I have no reason to lower the table, I’ve got LOTS of extra room UNDER the table for a filing/3D tool cabinet and plenty of filament spool storage. Now I’m just waiting for my “all-metal” hotend (AnkerMake M5) to arrive so I can install it and get back to printing. I left a print going overnight and it started collecting filament on the nozzle. When I awoke, there was a golf ball-sized wad of cooked and cured PLA encasing my hotend block and nozzle. In trying to heat and break off pieces of filament, I yanked out 2 wires that gave me an instant “Heating Error”. I was hoping to buy regular M5 hotends when I found the all-metal version. Just waiting now. Standing Table is awesome! Every bit as good, so far, as my wife’s more expensive version.

Excellent Product. Arrived as expected nice and fast. Couldn't be happier. 👍

Looks nice in my homeoffice, has good quality materials and very sturdy. I've been using it all day long for a few months now. The wheels make it easy to move and change the room's layout once in a while. No issues so far. Easy to operate and optimal size, fitting three large monitors and two laptops.

This is a great desk... Once it's built.. I bought the large 72" x 30" and it looks pretty good. I'd have given it 5* but there were a couple of issues. Firstly, upon completing building the desk, I did notice some gouges in the desk top. I'm pretty certain I didn't make them but I can't be 100% so check before you build. Secondly, and mainly, the desk came with pre-drilled holes to attach to the stand but they were drilled wrong. It wasn't the end of the world, the screws self-tapped into the desktop with a power screwdriver, but it meant measuring it + a bit of nervousness that the wood might split etc. I had the desk delivered overseas which took a few weeks so I really didn't want to send it back. As said, once built, it's great but not the best experience building it.

I was a bit apprehensive of spending the extra money on this desk compared to some of the cheaper options, but everything about this desk is spectacular and money well spent! - The base and Top were delivered separately (by a day) and both were packaged SO well. Lots of padding and protection. I appreciate that level of care to get the product to the consumer safely. - The base is built like a tank! It's heavy duty. It was easy to assemble with the given tools/hardware. - The top is beautiful. The color is great. The finish/feel is great - perfectly flat as well. If you like bamboo at all, this is a fantastic choice. Remember that this is solid wood, which is why you are paying a premium. - The dual motors operate nice and smoothly. It's pretty quiet. The previous review mentioned that the motors sound a bit like they are struggling when moving the desk up - which I agree with, but it doesn't appear like it's struggling it all. Just sounds a bit more laboured, but still quiet. - The only stress inducing part (for me) was attaching the top to the base, and that's my OCD speaking. I had to use toothpicks to align the holes in the base to the holes in the top while adding the screws, just to keep everything square. It was probably overkill. - Overall, this might be one of my best Amazon purchases ever. Highly recommend this desk and seller!

This desk is quiet, very solid, quality is excellent. Anybody who needs a motor electric standing desk this is the one. Love it. When l’ll have more money,l’ll buy another one for sure.