OBUYTO 30 Series Torque Converter Go Kart Pulley Kit 1 Inch Driver 5/8 Driven 10T #40 41 and 12T Sprocket #35 Chain for Manco Comet TAV2 218353A 212CC

Installed on my RT200. Had to make/install additional 1x1 spacers under the engine to make it fit - and it does with only 2mm to spare. purchased the tubing at local hardware store. Cut about 5.5" each tube then measured/drilled the holes. Prime and spray painted black to prevent rust. Also had to cut space for the chain to travel between the guard - custom fit 1" square on top and bottom of the right side of the shield.Saved me about $50 I think, in the end.

First one of the bosses for mounting the plastic cover was preventing it from fitting on my engine at all, but no biggie, I just cut and ground that off. More importantly this product claims to use a 5/8 inch jack shaft with 5/8 inch sprockets. I also ordered some 5/8 inch sprockets and lock collars to make a gear reduction for the kids go kart. Nothing 5/8 inch would fit this jack shaft at all, other than what came with this kit. All other sprockets, pulleys, spacers, and lock collars I have in 5/8ths would not fit. This kit does not use a 5/8ths shaft like stated in the description and thus is completely unusable for my indented purpose. Waste of money and time.

Had to cut back in plate to get it to fit, only to realize torque converter fits a 1 inch shaft and the mini bike as a 3/4inch shaft.

I got 2 thay say for 212cc how ever thay have 1” shaft size in the engine pully this just don’t work a 212cc has a 5/8 shaft so I had to get shaft adapters and rig the key way not fun

The product was the wrong shaft size. They said it was for a predator 212 it was not it was for the larger Engine with the larger shaft. Had to use part of my old system to make it work.