jusmo Camera Desk Mount Table Stand with 2 Auxiliary Holding Arm and Ball Head, 16.1"-33.8" Adjustable Light Stand for DSLR Camera, Ring Light, Live Streaming, Photo Video Overhead Shooting

Hello, there and I’m back again with another product review. This one is not sponsored as I did buy this myself. So, I know I ramble a bit if I’m not prompted so that’s why I use a teleprompter to at least guide me to keep me on track, and in many cases, I will write out my script completely and read it out. But that’s not what this is about. It is about the space which I use for making my YouTube videos and the efficiency of setting up my recording process. You see, to use the teleprompter, I need to use a tripod and I have two options, I either leave it on the floor there or I put it away and take it out every time I record. The latter is most used as we do have guests from time to time and I need to put that monstrosity away. And that’s kind of what I will be discussing here. I have purchased a desk-mounted camera mount with an auxiliary arm just so that I can keep all my stuff in one location and have nothing I must drag out or have to consume precious floor space. And here we are…my review of the JUSMO Camera Desk Mount with Auxiliary Holding Arm. Who’s if for? • Photographers • Videographers • Live streamers • Gamers • And for anything in between where you need a mount to secure something that uses a ¼ 20 What’s good about it? • Feels very solid and has a great clamp – most 1-star reviews show that the clamp broke while installing it. It’s made of aluminum and if you tighten it too much and especially on a non-parallel surface you can cause it to fail. • 43” is quite tall for a desk. You can adjust this for almost anything you see fit • The arm has a great clamp and it is very solid – just remember nothing more than 2.2 lbs • The ball joints lock very solidly into position and feel like good quality • There are so many options that you can use this for. • If you do it right you can mount it on a glass-covered desk – as I have. What’s not so good about it? • From the reviews I am concerned that the aluminum tabletop bracket may break in the near future. • There is some difficulty in the placement of the mount for that perfect location. I mean that to do a video I need to push the camera back so it’s attached to the rear of my desk but to do a top-down video like to review something that’s on my desk then I need to move it forward towards me to view at the right spot on my desk. • The arm will only attach to the bottom 2 sections of the 3-section desk mount. The top section is too small to fit the arm • Can’t extend the arm but it’s understood why – too far and it will put too much pressure on the desk mount and possibly break the clamp at the base My final thoughts: • What a great tool for using for whatever you want to do with it. I mean, you can use it for a camera mount at your desk, you can use it for a light mount to give you that fill-in light or key light, you can use it to do those product reviews from the top-down view with the arm. I mean, so many uses, but what I use it for is so perfect for me. • I have been able to remove a tripod that has taken so much floor space from me. And as well, because I can leave it up all the time, I now have a teleprompter that takes no time to set up. I just need to turn on the tablet, set up the script, turn on the camera and start recording. • While I have had this for only a few short weeks I feel that this will be part of my future in making videos and be crucial for it too. • There are options to buy the individual components from this kit and to be honest I really see myself buying a few more of these kits and some of the individual items. Closing: • I am great at rigging things up and making them work. But in the case of using a teleprompter in conjunction with my camera, I can’t really cut corners. I needed a tripod that was sturdy enough to hold those things and be adjustable to work for me. But while I was looking at things to buy and do a product review on I ran across the JUSMO VIJIM LS02 Desk mounting Stand and I thought this would be great for my desk. • For the price and what comes with it I am quite impressed with this and as I said before, I will probably get more of these for my setup. I really like this mount and it has saved me floor space in my room to use for other things. • This is worth the money in my opinion and I suggest that if you need to save some space in your office or room area then get one of these now, you'll be happy you did. My YouTube review: https://www.youtube.com/watch?v=VX1eTIzchFM

I know that this was designed for vloggers, but I’ve been using this in my classroom for the last month. I use this with an iPad to project what I’m doing on the table to a large screen television. When used with an iPad tripod adapter this makes a great wireless document camera mount. It’s sturdy, a good size, and the table clamp seems strong and secure. I move it around the classroom frequently and it’s easy to take off and put on tables. So far the swiveling camera mount at the end of the arm has remained tight and holds the weight of an iPad without sagging. We’ll see how it stands up to use in an elementary classroom for an entire school year. I have high hopes that I’ll be able to use this for some years to come.

It was great for my needs, and it worked just fine. I was a little frustrated at the beginning, as it's a telescopic tripod-like pole, the last tube is smaller in diameter and the clamp at the end of the auxiliary arm just can't be fixed in that part of the pole, so I couldn't use the higher point of the pole... But, I realize that the CLAMP is REMOVABLE, so, you can unscrew the clamp from the aux. arm, and screw the aux. arm it into the camera mount at the end of the last pole, and problem solved! you can reach the highest point of the pole with a sturdy set up. As I said, It work just fine for me, I needed to put a little projector looking down, so I needed that Highest point, and it workerd.

The vertical post is sturdy and beneficial. The smaller arm is more flimsy than I’d prefer and does not hold much weight. Was hoping to affix a mirrorless camera to it, which I have done, but the arm does not feel secure let alone remain horizontal. Of course you can adjust the camera’s horizon with the mounting head, but I don’t trust the system as is. A light, a mic, or a smaller camera like a GoPro or phone is what this works best for.

This mount has upped my filming game so much! I am able to film unboxings, GRWMs, reviews, even fitness videos out on my balcony with just this mount! It's super sturdy and can handle a decent amount of weight (I've had my iPhone 13 Pro Max, 2 lights, and my GoPro10 all mounted at the same time) and it doesn't damage my island counter top or any other desk/counter/rail that I've mounted it to. I did the ULANZI Super Clamp to be able to add additional devices when needed and the rig has been fine handling the weight of that as well. 10/10 recommend for any content creator looking to film from above or completely hands free!

I needed three inexpensive copy stand set-ups for artifact photography and these worked great. Our Cameras are Canon EOS Rebel T7 DSLRs and these stands were plenty sturdy enough to support them. Added bonus is that the arm is longer than on a regular copy stand so that small people like me didn't have to bend way across the table to focus the camera. The stands have lots of other uses, too such as for clipping lights, gels, bounce boards etc. Very handy.

No matter how tight you screw the tabletop clip to the table top, it ends up leaning. This is utterly useless for the whole reason I bought it. I wish I had tried it sooner, but now it's probably too late for a return. This should not be marketed towards DSLR users, it's only good for phones, if that. If it were sturdier, it would be okay. Update: this seller is STELLAR. Even though the sale took place a long time ago they more than made it right. I am very impressed. The seller gets TEN STARS!!!

First off I've tried a bunch of desk mounts / arms, and was never really happy, till now... this desk mount is great for my light and holds my Logitech brio cam no problem. It seems very sturdy and doesn't wobble like my last desk mount. I have the extention rod on the 2nd tier of the desk mount and it works great, no wobble or concerns so far.

This desktop camera mount packs so much value for a small cost. This does everything I needed in a camera mount for my desktop setup. It can be used for over head recording or normal stationary needs. It also came with a phone mount incase I ever wanted to use my phone to record. Would definately recommend this to anyone who is looking to mount a camera for video recording or streaming. This is much cheaper than its counter parts which are much more expensive.

ستاند جبار وقليلة الكلمة فيه حتى جودتة ممتازة

I have purchased 4 different kinds of Phone holder/tripods searching for one that can hold the weight of the phone at different angles to videotape me sewing and patternmaking. This Desk Mount is VERY well made, very strong metal materials and high quality phone bracket. The base extends on two different tiers and can get very tall and the boom can swing in 380 degrees and the phone bracket can also turn in any way you want. The ONLY thing I wish is that the boom also extended. because you have to mount this to a table, not all places to mount are the right distance from where you need your phone. Zoom can help some but not quite right. That being said, I can mount the boom onto a regular tripod and put it anywhere I want, but the boom is still pretty short.

La calidad es lo que buscaba, se ve y siente de buena calidad, luce tal cual las fotos. Estoy muy satisfecho. El único detalle que tiene es el sujetador del celular que se le tiene que jalar duro para abrirlo y que genera mucha presión sobre el celular a mi parecer, seria un detalle a mejorar del fabricante. Pero el sujetador cumple con su función de ahí en fuera en realidad todo excelente.

Holds up my Sony a7iv with a tamron 28-75mm f2.8 G2 with no issue. This allows me to use it for streaming at an angle that would otherwise be inaccessible in my setup when using a tripod