FX798T Blade Inductrix Tiny Whoop FPV Camera KitDescription:FX798T FPV Camera Output power: 25mWInput power: 2.5 ~ 5V, Video output: NTSCCurrent Consumption: 230mA, AV Output: VGA 640 * 480 PAL/1VP-PCamera resolution: 600TVL, Min illumination: 1 luxField of view: 120 degrees viewing angleAntenna dimensions: 20mm * 25mm diameter Antenna: 3 lobe right hand circular polarizedFrequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917MHzPush button operation, long press for band, short press for channel2 row LED indicators, 5 LED for band, 8 LED for channelSize: 17 * 17.5 * 12.5mm , Weight: 3.4gInductrix FPV Camera Mount This is a Camera/VTX mount for the Blade Inductrix. the chance of tearing a SMD component of the board with aggressive double sided tapes. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Solder your power wires 2pcs Blade Inductrix JST Y Splitter and JST 1.25mm Connector CableY splitter:Wire Length: 15mm Connector: Micro JST 1.25, 2 Pin WaferWeight: 5g Applying: Use one battery to supply two power for Transmitter and Flight controller.Micro JST cable:frequency: Low frequencyRange of Application: PCBLenghts: 100mmType of adapter interface: ZIFWire: 1571 28Package Including1 * FX798T TX Camera Combo2 * FPV Antenna2 * FPV Camera Mount(Random color)2 * Blade Inductrix Ultra Micro JST Y Splitter 2 * Micro JST 1.25mm Connector Cable1 * User manual
R**L
Awesome micro FPV kit!
Great camera and lots of extra's! you can outfit 2 Tiny Whoops in your fleet and easily swap the camera between them! Only have 1 whoop? no problem, then you have spare hardware and wiring to go along with the 2 spare antennas!Crazepony exceeds expectations with their Micro FPV offerings. I'm late making this review but they've come out with other Micro cam packages since I brought this that just keep getting better and better!
R**Y
Was defective...
Update 1/1/17:Seller Crazepony was awesome at resolving the issue with this order and sent out a replacement camera immediately. Very professional and prompt service. HIGHLY RECOMMEND this seller and product. Thank you!!*****************Original Review:Worked but range sucked. Definitely a lemon/defective one. Disappointed to say the least. Tried another included antenna and still didn't fix it. Had to return. I went with the $30 camera from crazypony. Works flawlessly.
B**5
Good but could be better
This camera works as advertised and can be connected to a battery without any soldering/wiring. However I have to subtract 2 stars because you can't focus the camera yourself. It comes locked in at clear focus of about a yard. For close up proximity flying thats ok but everything past that distance is more out of focus than it should be.
1**0
Great kit, good price
Great kit, good price. Didn't use the connectors, soldered camera directly to board to keep wires short. Have yet to break an antenna but it's nice to have spares. Used a tiny bit of hot glue to keep camera from popping out of mount. More spare camera mounts would be nice, I've broken one of those after a bad crash.
A**D
Great camera, lots of extras!
This is a great little camera for a tiny whoop build. Connected to my fatshark goggles on the first try. Plus the guys at Crazypony left lots of extras in the bundle!Overall 5 out of 5
T**N
This is a dynamite camera. Only problem you have ...
This is a dynamite camera. Only problem you have to remove the camera from the case to fit into the mount. They may have fixed this. Really works grate with the inductrix.
M**G
FX798T works great on my Frankenstein FPV micro quad
FX798T works great on my Frankenstein FPV micro quad. I bought this one because it comes with spare parts, like antennas... and if you fly... you know they break!
J**.
Great for tiny whoop
Must have to convert industrial into a tiny whoop. The camera platforms fit perfectly allowing your camera to hold proper angle while racing around the house.
Trustpilot
1 month ago
1 day ago
