Neitra Cabinet Hardware Jig, Adjustable Drill Guide for Accurate Installation of Door and Drawer Front Handles and Knobs Punch Locator Wood Drilling Doweling Templates Jig Tool

Excellent product. Tool is well made and is easy to operate. All adjusters remained locked in place when tightened and instructions on operation are easy to follow. I’m using this tool on a new house build with a ton of cabinets. I use a punch tool through the eyelets instead of placing my drill bit through them. A lot easier to handle this way. Definitely a time saver and a lot better than building a template myself given the large amount of different cabinet drawer / doors I have to contend with.

Used it for an entire house -- kitchen and bathroom cabinets and drawers! The unit was easy to use, and was accurate (I confirmed it was square and measurements were correct). One minor complaint... over a day of using the jig, the main/vertical thumbscrew came loose (although I had tightened it down as tight as I could with just my fingers at the start of the project). I happened to notice before drilling an incorrect hole, but I would recommend either checking it for tightness before each cabinet, or using a bit of loctite on it. Another tip (which I saw in the instructions) is to put some tape over any hole you are not using to drill... to provent accidently drilling an extra one!

Works great, very accurate and well made. Highly recommend.

This is a worthwhile tool for the money with a couple of caveats. The main one is that the mark on the sliding end stop is 1/2" end and the thickness of the screw down stop tab adds roughly an additional 1/8". The picture shows where I ended up setting it for a cabinet door knob 1-15/16" from the top. I tried to take the attached picture straight on. I found no instructions on how to set the end stop. A more minor issue is that the allen head set screw on the main slider needs to be tightened occasionally. It's not a serious problem as it didn't happen once the jig was set up. Additionally, the jig comes with all needed wrenches plus some spare parts. I ended up drawing a couple of lines on a piece of scrap wood to verify that the jig offsets were correct. Once I did that, I found the jig sturdy and easy to use. It would also have preferred if it came with a larger plastic case like some more expensive jigs so that it wouldn't have to be completely disassembled in between uses, but for the price point I'm willing to accept the smaller zipper case. The smaller size does make it easier to store and transport.

We purchased this product following a kitchen remodel. The product was well made, the materials were solid and the hardware seemed durable. Unfortunately after putting the jig together I noticed a hairline crack in the lower arm of the jig which caused the level to be off. Obviously I am not going to use an unlevel jig to install hardware on new cabinets and drawer fronts. It seemed as though it was dropped while being packaged for shipping and the packer probably didn’t even notice the damage. These things happen, so I wasn’t too sour. I returned the jig and was ready to purchase a new one. Prior to ordering the company reached out and offered to send me a new one free of charge. It is very rare to see a company stand behind their product. I received my new jig, assembled it and installed the hardware. Easy to use and all of the hardware is laser level. I’m a happy customer and I recommend this product to anyone looking to install hardware on a new kitchen. Came with a very nice case as well.

The jig helped out alot to get the pulls all aligned straight. The cheaper plastic jigs I tried, and returned, were all off by millimeters over the span of the length, not good. This jig, however, was spot on the entire length. Plus it was metal, and there was no play in the attachments, and comes with a nice storage case to keep all the pieces safe.Didn't want to spend $300 for that other metal jig, this was was a great alternative. Was able to do my shaker cabinets fine, even without the shaker adapters. Use clamps to hold in place when drilling.This uses a 5mm drill FYI, which is about 3/8. Would have preferred 11/64, the the little extra can give you room for super minor adjustments when you're all done.

Large stop needs second thumb screw on other side to keep it from slipping, have had several instances, where it has slipped and caused handels to be out of line.

This tool has been such a time saver!! If something happens to this one, it will be replaced with an identical one.

Outil de qualité à un prix abordable. Emballé avec soin, livraison rapide. Vient avec un sac de rangement.J'ai pu installer les poignées de tous mes panneaux d'armoires et de tiroirs de cuisine et de salle de bain avec une grande précision comme un PRO !Conseil pratique : Changer la mèche de perçage avant usage pour obtenir un résultat optimal.